Routine sample definition

Routine sample means a bacteriological sample the water supplier is required to collect on a regular basis, or one which the supplier is required to collect for a system not in compliance with Sections 64650 through 64666 when treated water turbidity exceeds 1 nephelometric turbidity unit (NTU), pursuant to §64423(b).
Sample 1Sample 2Sample 3
Routine sample means a water sample that is collected and analyzed to meet the monitoring requirements for total coliform, as outlined in the written sampling plan.
Sample 1Sample 2Sample 3
Routine sample means a sample that is collected at a location and frequency as specified in the department-approved sample siting plan;
Sample 1Sample 2

Examples of Routine sample in a sentence

  • Routine, sample and type tests of Bushing shall be carried out in accordance with the specified standards.

  • Routine sample collection and analysis for the water-quality parameters of concern shall be performed at up to four (4) representative existing xxxxx identified by the TWG.

  • Protection of this nature is consistent with the duty placed on BW in 1995 to take account of the desirability of protecting remainder waterways with potential for use as cruising waterways so they can be upgraded to cruising status.

  • Routine sample analyses are suspended until corrective action is taken.

  • PART IV—ANALYTICAL‌ Routine sample collection under this compliance program is not anticipated.As discussed in Part III.9—Sampling, the inspection team should contact CDER before any samples are collected, with the exception of samples collected to document interstate commerce.

  • Complete this section if your water system needs to collect a Routine sample from a different location than what is listed in Section 1.

  • Routine sample transport of biological patient samples from clinics to designated regional health laboratories in Eswatini This activity requires the transportation of All sample types (Blood, Sputum, EID- DBS and Cytology) from clinics to regional health laboratories for testing and return the results to the clinic in the shortest possible time.

  • Routine sample sites shall be selected to sample water in the distribution system from each water source, storage tank, reservoir, and pressure zone.

  • Source Water Sample Location(s) See Section 1c below to determine if applicable Collect 1 sample from each well in use when the Routine sample was collected Raw #1:   Raw #2:   (Sample location before any treatment for the 2nd well) Raw #3:   (Sample location before any treatment for the 3rd well) Raw #4:   (Sample location before any treatment for the 4th well) Section 1c.

  • Routine sample collection and analysis for the water-quality parameters of concern shall be performed at up to four (4) representative existing wells identified by the TWG.


More Definitions of Routine sample

Routine sample means a sample required by 18 AAC 80.300 - 18 AAC 80.355, 18 AAC 80.405, or 18 AAC 80.500 - 18 AAC 80.505;
Sample 1

Related to Routine sample

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • DNA sample means any material that has come from a human body and consists of or includes human cells;

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Drug sample means a unit of a prescription drug that is not intended to be sold and is intended to promote the sale of the drug.

  • Single tomogram system means a CT x-ray system which obtains x-ray transmission data during a scan to produce a single tomogram.

  • Sampler means a person who is employed by or is an owner of a licensed laboratory, grower, or processor and is authorized by that employer to collect samples in accordance with the testing laboratory's standard operating procedures and these Rules.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Batch means a specific quantity of Product that is intended to be of uniform character and quality, within specified limits, and is produced during the same cycle of Manufacture as defined by the applicable Batch Record.

  • Routine use means the disclosure of a record without the consent of the subject or subjects, for a purpose which is compatible with the purpose for which the record was collected. It includes disclosures required to be made by statute other than the public records law, Iowa Code chapter 22.

  • Samples mean representative physical examples of materials, equipment or workmanship, used to confirm compliance with requirements and/or to establish standards for use in execution of the Work.

  • Sample means urine, blood, breath, saliva, or hair.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Outputs means the goods or services that are produced by an entity or other person;

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Assay means a laboratory analysis of Crude Petroleum to include the following: A.P.I. Gravity, Reid vapor pressure, composition, pour point, water and sediment content, sulfur content, viscosity, distillation, hydrogen sulfide, flash/boiling point and other characteristics as may be required by Carrier.

  • frequency ride through as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-frequency and over- frequency conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis. The term “voltage ride through” as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-voltage and over-voltage conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis.

  • Disinfection profile means a summary of daily Giardia lamblia inactivation through the treatment plant. The procedure for developing a disinfection profile is contained in s. NR 810.34.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Biological Samples means any physical samples obtained from Study Participants in accordance with the Protocol for the purposes of the Study.

  • Feed means feed as defined in point (4) of Article 3 of Regulation (EC) No 178/2002;

  • Composite sample means a combination of individual samples of wastewater taken at 1 hour intervals, for eight (8) hours (or for the duration of discharge, whichever is less), to minimize the effect of variability of the individual samples. Individual samples must be of equal volume. (Example: one (1) liter per hour.)

  • Bottle means any vessel intended to contain liquids and having a capacity of not more than 43

  • API means the American Petroleum Institute.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.