RUBBER BASE definition

RUBBER BASE. The office areas shall have a 4" high topset rubber base as manufactured by Burke, Roppe, or Tarkett, installed in all areas receiving floor covering except the toilet rooms.
RUBBER BASE. The Building Standard Allowance for Multi-tenant industrial office space is $1.25
RUBBER BASE. 2-1/2" straight or coved by Xxxxx or equal.

Examples of RUBBER BASE in a sentence

  • NOTES BASE B RB = RUBBER BASE MATERIALS B P.B. = PARTICLE BOARD GYP.

  • STEEL DAMPPROOFING, WATERPROOFING DOORS, FRAMES & HARDWARE TINTING OF GLAZING DRYWALL, FRAMING ACOUSTICAL CEILINGS RUBBER BASE FLOORING PAINTING HVAC ELECTRICAL FENCING & GATES LANDSCAPING, IRRIGATION SIGNAGE All parties interested in bidding on this project must be prequalified in order for their bid to be considered.

  • VINYL TOPSET OR RUBBER BASE COVE ARE NOT APPROVED.B. Manufacturer’s installation criteria and standards must be followed.

  • ALTERNATE 2 BASE BID: REMOVE VCT AND RUBBER BASE IN SOILED UTILITY ROOMS 7235 AND 7211.

  • FAILURE TO DO SO ADVISE WILL CONSTITUTE NOTICE THAT THE CONTRACTOR IS FULLY SATISFIED WITH THE EXISTING CONDITIONS AND THAT HE INTENDS TO PERFORM HIS OBLIGATIONS AUTO AT BD BEV BFD AUTOMATIC ACOUSTICAL TILE BOARD BEVEL BI-FOLD DOORS GLAM GR GS GSB GRT GLU-LAMINATED GRADE GIPSUM SHEATHING GIPSUM SHEATHING BOARD GRANITE RAD RB RCP RD RDWD RADIUS RUBBER BASE REFLECTED CEILING PLAN ROOF DRAIN REDWOOD SHEET NO.

  • Available: WHT 11/16” 11/16” RUBBER BASE SPECIFICATIONS Flooring accessories shown in the finishing schedule as RUBBER WALL BASE shall be high resin content rubber modified wall base as manufactured by BENGARD MANUFACTURING.

  • Pattern: See drawings for patterns 2.2 MATERIALS – RUBBER BASE A.

  • RUBBER BASE SHALL BE 4”, WITH TOE, ON OTHER FLOORING WHERE APPLICABLE.

  • BUTYL SEALANT SHALL BE BUTYL RUBBER BASE COMPOUND EQUAL TO THE MANUFACTURED BY SONNEBORN OR PECORA (ALL OTHER CAULKING) PROJECT/SITE CLEAN-UPUSE ONLYUPON COMPLETION, THE ROOFING CONTRACTOR SHALL REMOVE ALL RUBBISH, WASTE MATERIALS, ETC.


More Definitions of RUBBER BASE

RUBBER BASE. All areas receiving floor covering except the toilet rooms shall have 4" high topset rubber base as manufactured by Burke, Roppe, or Tarkett in a standard color.
RUBBER BASE. All areas receiving floor covering shall have 4" high topset rubber base as manufactured by Burke, Roppe, or Tarkett in a standard color.

Related to RUBBER BASE

  • Earned value management system means an earned value management system that complies with the earned value management system guidelines in the ANSI/EIA-748.

  • Elementary neutralization unit means a device which:

  • Air Bag means an unaltered factory-installed supplemental restraint system designed to inflate upon impact to protect a person from bodily Injury during an accident.

  • Basic Comprehensive User Guide means the Ministry document titled Basic Comprehensive Certificates of Approval (Air) User Guide” dated April 2004 as amended.

  • Tariff Base has the meaning given to it in, and will be calculated in accordance with, the Fees Rules.

  • Density bonus means a floor area ratio bonus over the otherwise maximum allowable density permitted under the applicable zoning ordinance and land use elements of the general plan of a city, including a charter city, city and county, or county of:

  • Annual Resource Price Adder means, for Delivery Years starting June 1, 2014 and ending May 31, 2017, an addition to the marginal value of Unforced Capacity and the Extended Summer Resource Price Adder as necessary to reflect the price of Annual Resources required to meet the applicable Minimum Annual Resource Requirement.

  • Quotes Base means Quotes Flow information stored on the Server.

  • Municipal Revitalization Index means the 2007 index by the

  • Home Base means the location, assigned by the operator to the crew member, from where the crew member normally starts and ends a duty period or a series of duty periods and where, under normal circumstances, the operator is not responsible for the accommodation of the crew member concerned;

  • Number of Employees enter the total number of Employees in the employment category employed to provide services under the Contract during the report period, including part time Employees and Employees of subcontractors.

  • Total resource cost test or "TRC test" means a standard that is met if, for an investment in energy efficiency or demand-response measures, the benefit-cost ratio is greater than one. The benefit-cost ratio is the ratio of the net present value of the total benefits of the program to the net present value of the total costs as calculated over the lifetime of the measures. A total resource cost test compares the sum of avoided electric utility costs, representing the benefits that accrue to the system and the participant in the delivery of those efficiency measures, as well as other quantifiable societal benefits, including avoided natural gas utility costs, to the sum of all incremental costs of end-use measures that are implemented due to the program (including both utility and participant contributions), plus costs to administer, deliver, and evaluate each demand-side program, to quantify the net savings obtained by substituting the demand-side program for supply resources. In calculating avoided costs of power and energy that an electric utility would otherwise have had to acquire, reasonable estimates shall be included of financial costs likely to be imposed by future regulations and legislation on emissions of greenhouse gases.

  • social infrastructure means community facilities, services and networks that meet social needs and enhance community well-being;

  • Total Evaluated CRIS MW means the Additional CRIS MW requested plus either (i) if the Installed Capacity Supplier previously received an exemption under Sections 23.4.5.7.2(b), 23.4.5.7.6(b), 23.4.5.7.7 or 23.4.5.7.8, all prior Additional CRIS MW since the facility was last exempted under Sections 23.4.5.7.2(b), 23.4.5.7.6(b), or 23.4.5.7.8, or (ii) for all other Installed Capacity Suppliers, all MW of Capacity for which an Examined Facility obtained CRIS pursuant to the provisions in ISO OATT Sections 25, 30, or 32 (OATT Attachments S, X, or Z). For purposes of Section 23.4.5 of this Attachment H, “UCAP Offer Reference Level” shall mean a dollar value equal to the projected clearing price for each ICAP Spot Market Auction determined by the ISO on the basis of the applicable ICAP Demand Curve and the total quantity of Unforced Capacity from all Installed Capacity Suppliers in a Mitigated Capacity Zone for the period covered by the applicable ICAP Spot Market Auction. For purposes of Section 23.4.5 of this Attachment H, “Unit Net CONE” shall mean localized levelized embedded costs of a specified Installed Capacity Supplier, including interconnection costs, and for an Installed Capacity Supplier located outside a Mitigated Capacity Zone including embedded costs of transmission service, in either case net of likely projected annual Energy and Ancillary Services revenues, and revenues associated with other energy products (such as energy services and renewable energy credits, as determined by the ISO, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate. The Unit Net CONE of an Installed Capacity Supplier that has functions beyond the generation or transmission of power shall include only the embedded costs allocated to the production and transmission of power, and shall not net the revenues from functions other than the generation or transmission of power.

  • Base Load Generation Resource means a Generation Capacity Resource that operates at least 90 percent of the hours that it is available to operate, as determined by the Office of the Interconnection in accordance with the PJM Manuals.

  • Limited Resource Price Decrement means, for the 2017/2018 Delivery Year, a difference between the clearing price for Limited Demand Resources and the clearing price for Extended Summer Demand Resources and Annual Resources, representing the cost to procure additional Extended Summer Demand Resources or Annual Resources out of merit order when the Limited Resource Constraint is binding.

  • Monthly Base Salary means 1/12th of the greater of (i) Executive’s annual base salary (excluding incentive pay, premium pay, commissions, overtime, bonuses and other forms of variable compensation) as in effect on the date of a Change in Control Termination or a Covered Termination, as applicable, or (ii) in the case of a Change in Control Termination, Executive’s annual base salary (excluding incentive pay, premium pay, commissions, overtime, bonuses and other forms of variable compensation) as in effect on the date of a Change in Control.

  • Acceptable earned value management system means an earned value management system that generally complies with system criteria in paragraph (b) of this clause.

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Extended Summer Resource Price Adder means, for Delivery Years through May 31, 2018, an addition to the marginal value of Unforced Capacity as necessary to reflect the price of Annual Resources and Extended Summer Demand Resources required to meet the applicable Minimum Extended Summer Resource Requirement.

  • Base Flood Elevation (BFE means a determination of the water surface elevations of the base flood as published in the Flood Insurance Study. When the BFE has not been provided in a “Special Flood Hazard Area”, it may be obtained from engineering studies available from a Federal, State, or other source using FEMA approved engineering methodologies. This elevation, when combined with the “Freeboard”, establishes the “Regulatory Flood Protection Elevation”.

  • port townsite means the townsite to be established pursuant to this Agreement near the harbour;

  • facial image means digital images of the face;

  • Data Universal Number System (DUNS) Number means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities.

  • Data Universal Numbering System (DUNS) number means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities.

  • Maximum allowable cost list means a list of drugs for