Sanitizing Solution definition

Sanitizing Solution means a solution containing 50 to 200 parts per million (ppm) of chlorine. A sanitizing solution can be made by mixing a tablespoon of liquid household chlorine bleach with one gallon of water and prepared fresh daily.
Sample 1Sample 2Sample 3
Sanitizing Solution means Aqueous solutions described by 21 CFR 178.1010, 2004, for the purpose of sanitizing food or water contact surfaces.
Sample 1Sample 2Sample 3
Sanitizing Solution means a solution containing 50 to 200 parts per million (ppm) of chlorine or
Sample 1Sample 2

Examples of Sanitizing Solution in a sentence

  • Sanitizing Solution is defined in NSF/ANSI 170-2010; Section 3.177.

  • The Agency assumed that food can contact 4000 cm2 of treated surfaces, utensils, glassware, or pots and pans and that 100% of the pesticide migrates to food based on the standard assumptions used in the FDA Sanitizing Solution Guidelines.

  • UTENSIL WASHING: I am providing the following items within my booth for the sanitary cleaning of food preparation and serving utensils: (See example set up below)Three (3) deep tubs (basin 6‐8 inches minimum):• Detergent & Water• Clean Rinse Water• Sanitizing Solution (100ppm Chlorine solution or 200ppm Quat solution).🞏 Yes 🞏 No8.

  • Appendix 304-A Making a Sanitizing Solution SANITATION OF FOOD PREPARATION WORK AREAS AND EQUIPMENTA number of factors influence the effectiveness of any chemical sanitizer.

  • NON-FOOD CONTACT SANITIZER Sanitizing Solution - HIV-1 virus (AIDS virus): Dissolve [1.9g of this product with one gallon of water] {or} [3.8g of this product with two gallons of water] (200 ppm).

  • Quaternary Ammonia Sanitizer – Soluble @ 75ºF – Second Rinse – Auto-Cholor Sanitizing Solution or comparable 13.

  • SECTION 3: HEALTH AND SANITATION – POLICY & PROCEDURESProcedure 1: Sanitizing SolutionDate Policy Approved: Nov 24, 2005Date Policy Reviewed/Revised: Dec 6, 20161.1. Sanitizing Solution For Toys, Diaper Change Area, General Disinfecting: - Mix one teaspoon of bleach with two cups of water.1.2. For Soiled Areas: Mix one-quarter cup of bleach with two and a quarter cups of water.

  • UTENSIL WASHING: I am providing the following items within my booth for the sanitary cleaning of food preparation and serving utensils: (See example set up below)Three (3) deep tubs (basin 6‐8 inches minimum): Detergent & Water Clean Rinse Water Sanitizing Solution (100ppm Chlorine solution or 200ppm Quat solution). Yes  No8.

  • Sanitizing Solution" means a solution containing 50 to 200 parts per million (ppm) of chlorine or a sanitizer as defined at 40 C.F.R. 158.2203 that is registered with the EPA in accordance with 40 C.F.R. 152 that is approved by the EPA for use on food contact surfaces, does not require a final rinse step, and has a testing method that can be used by child care center employees to confirm that the prescribed chemical concentrations are met.

  • To assess oral exposure fromfood handling surfaces, the Agency utilized the Food and Drug Administration (FDA) Food Contact Surface Sanitizing Solution Dietary Exposure Assessment Model (FDA/ CFSAN OPA: Chemistry Guidance— Sanitizing Solution version 1.1; January 1993; Office of Premarket Approval now Office of Food Additive Safety).


More Definitions of Sanitizing Solution

Sanitizing Solution means Aqueous solutions described prior to being vended, and the name of the manufacturer and the by 21 CFR 178.1010, [1995]1999, for the purpose of sanitizing model number of each machine.
Sample 1Sample 2
Sanitizing Solution means a solution approved by the US Environmental Protection Agency, a chemical disinfectant, or a bleach solution made daily.
Sample 1
Sanitizing Solution means a solution containing 50 to 200 parts per million (ppm) of chlorine or a sanitizer as defined at 40 C.F.R. 158.2203 that is registered with the EPA in accordance with 40
Sample 1
Sanitizing Solution means a solution containing 50 to 200 parts per million (ppm) of chlorine or a sanitizer as defined at 40 C.F.R. 158.2203 that is registered with the EPA in accordance with 40 C.F.R. 152 that is approved by the EPA for use on food contact surfaces, does not require a final rinse step, and has a testing method that can be used by child care center employees to confirm that the prescribed chemical concentrations are met. When a sanitizing solution is used in a child care center, the manufacturer’s Safety Data Sheet shall be kept on file at the child care center and the instructions for use of the sanitizing solution shall be followed. When a chorine solution is used in a child care center it shall be prepared for use within 24 hours and a testing method or kit shall be used to ensure compliance with the prescribed chlorine concentration. To achieve the maximum germ reduction with a chlorine solution, the cleaned surfaces shall be left wet with the chlorine solution and allowed to air dry or be dried only after a minimum contact time of at least two minutes. chlorine. A sanitizing solution can be made by mixing a tablespoon of liquid household chlorine bleach with one gallon of water and prepared fresh daily.
Sample 1
Sanitizing Solution means a solution containing 50 to 200 ppm of chlorine or a sanitizer as defined at 40 CFR 158.2203 that is registered with the EPA in accordance with 40 CFR 152 that is approved by the EPA for use on food-contact surfaces, does not require a final rinse step, and has a testing method that can be used by child care center employees to confirm that the prescribed chemical concentrations are met and that is prepared and maintained in accordance with Rule .2812(j) of this Section
Sample 1

Related to Sanitizing Solution

  • Supplier means the successful bidder who is awarded the contract to maintain and administer the required and specified service(s) to the State.

  • Vendor or “Vendors” means any entity submitting a bid in response to the Solicitation, the entity that has been selected as the lowest responsible bidder, or the entity that has been awarded the Contract as context requires.

  • Customer means the State agency or other entity identified in a contract as the party to receive commodities or contractual services pursuant to a contract or that orders commodities or contractual services via purchase order or other contractual instrument from the Contractor under the Contract. The “Customer” may also be the “Buyer” as defined in the PUR 1001 if it meets the definition of both terms.

  • Reseller is a category of CLECs who purchase the use of Finished Services for the purpose of reselling those Telecommunications Services to their End User Customers.

  • Manufacturer means the person or body who is responsible to the approval authority for all aspects of the type approval process and for ensuring conformity of production. It is not essential that the person or body is directly involved in all stage of the construction of the vehicle, system, component or separate technical unit which is the subject of the approval process.

  • Customer Technology means Customer's proprietary technology, including Customer's Internet operations design, content, software tools, hardware designs, algorithms, software (in source and object forms), user interface designs, architecture, class libraries, objects and documentation (both printed and electronic), know-how, trade secrets and any related intellectual property rights throughout the world (whether owned by Customer or licensed to Customer from a third party) and also including any derivatives, improvements, enhancements or extensions of Customer Technology conceived, reduced to practice, or developed during the term of this Agreement by Customer.

  • Product means any deliverable under the Contract, which may include commodities, services, technology or software.

  • Client means the Project lead of technical wing of the Purchaser for whose’ particular project the Goods / Services have been procured or any other person, duly appointed in writing, by the Client, for the time being or from time to time, to act as Client for the purposes of the Contract.

  • Distributor means a person who distributes.

  • Manufacturing means all activities related to the manufacture of a Compound, including planning, purchasing, manufacture, processing, compounding, storage, filling, packaging, waste disposal, labeling, leafleting, testing, quality assurance, sample retention, stability testing, release, dispatch and supply, as applicable.

  • Outreach Services has the meaning ascribed thereto in Section 2.1(F)(5) hereof and Exhibit B hereto.

  • Prospective contractor means a person who is subject to the competitive sealed proposal process set forth in the Procurement Code or is not required to submit a competitive sealed proposal because that person qualifies for a sole source or a small purchase contract.

  • Solution means the MMF or a subset thereof, and in respect of any Sprint means the solution to be delivered by the Supplier to meet the Acceptance Criteria for the Stories that form the subject of that Sprint; and the output of the Solution may take the form of the delivery of Software and/or Deliverables and/or the provision of Services; SOW means a statement of work as executed by the Parties, in respect of a Release; and where multiple SOWs have been entered into by the Parties in respect of multiple Releases, then reference to SOW shall be a reference to the SOW which is applicable to the relevant Release; SOWs means all the SOW executed under this Contract; Sprint means the performance by each of the Parties of Planning, Activities, Showcase and Retrospective to enable the Supplier to deliver the Solution in order to Complete the specified Stories by the end of the Sprint Timebox; Sprint Plan means the plan that relates to a Sprint as agreed by the Parties; Sprint Timebox means a fixed period of time for the completion of a Sprint, the duration of which shall be as set out in the Calibration Deliverable;

  • Custom Materials means Materials developed by the Supplier at the Procuring Entity's expense under the Contract and identified as such in Appendix 5 of the Contract Agreement and such other Materials as the parties may agree in writing to be Custom Materials. Custom Materials includes Materials created from Standard Materials.

  • Client Materials means all works and materials supplied by or on behalf of the Client to the Consultant for incorporation into the Deliverables or for some other use in connection with the Services;