Secondary control system definition

Secondary control system means a device or apparatus (typically a carbon adsorber), that reduces the concentration of Perc in the recirculating air at the end of the drying cycle beyond the level achievable with a refrigerated condenser alone.
Sample 1Sample 2Sample 3
Secondary control system means a device or apparatus that reduces the concentration of perchloroethylene in the recirculating air at the end of the drying cycle beyond the level achievable with a refrigerated condenser alone. An "integral" secondary control system is designed and offered as an integral part of a production package with a single make and model of dry cleaning machine and primary control system.
Sample 1Sample 2Sample 3
Secondary control system means a device or apparatus that
Sample 1Sample 2Sample 3

Examples of Secondary control system in a sentence

  • AMC VLA 405 Secondary control system (Interpretative Material)‌ED Decision 2003/18/RMSingle hand or foot loads assumed for design should not be less than the following:a.

  • Secondary control system adaptive equipment shall be accessible to the driver with a disability for whom it is designed when he/she is behind the wheel, not susceptible to inadvertent operation, and suitable for use by drivers who are not disabled and may need to operate the vehicle.

  • The primary objective of contacting this group through a questionnaire was to collect information on the role of employee retention on organizational success.


More Definitions of Secondary control system

Secondary control system means a device or apparatus that reduces the concentration of perchloroethylene in the recirculating air at the end of the drying‌
Sample 1
Secondary control system means a system, such as
Sample 1
Secondary control system means a device or apparatus that reduces the concentration of perchloroethylene in the recirculating air of a perchloroethylene drycleaning machine at the end of the drying cycle beyond the level achievable with a refrigerated condenser alone.
Sample 1
Secondary control system means a device or apparatus that reduces the concentration of perchloroethylene in the recirculating air at the end of the drying cycle, beyond the level achievable with a refrigerated condenser alone, and is designed to reduce perchloroethylene concentration below 300 ppm for equipment manufactured after January 1, 2002 or below 500 ppm for equipment manufactured before January 1, 2002.
Sample 1
Secondary control system means a device or apparatus that reduces the concentration of perchloroethylene in the recirculating air at the end of the drying cycle, beyond the level achievable with a refrigerated condenser alone, and is designed to reduce the perchloroethylene concentration below 500 ppm.
Sample 1

Related to Secondary control system

  • Vapor control system means a system that prevents release to the atmosphere of gasoline vapors in excess of 80 milligrams per liter of gasoline loaded (4.7 grains per liter).

  • Control system means the combination of capture and control devices used to reduce emissions to the atmosphere.

  • area control service means air traffic control service for controlled flights in control areas;

  • air traffic control service means a service provided for the purpose of:

  • Traffic control signal means a device, whether manually, electrically, or mechanically operated, by which traffic is alternately directed to stop and permitted to proceed.

  • Secondary dose monitoring system means a system which will terminate irradiation in the event of failure of the primary dose monitoring system.

  • Analytical x-ray system means a group of components utilizing x-rays to determine the elemental composition or to examine the microstructure of materials.

  • Beam monitoring system means a system designed and installed in the radiation head to detect and measure the radiation present in the useful beam.

  • Stormwater management system means any equipment, plants,

  • Stormwater management facility means a control measure that controls stormwater runoff and changes the characteristics of that runoff including, but not limited to, the quantity and quality, the period of release or the velocity of flow.

  • Water control structure means a structure within, or adjacent to, a water, which intentionally or coincidentally alters the hydraulic capacity, the flood elevation resulting from the two-, 10-, or 100-year storm, flood hazard area limit, and/or floodway limit of the water. Examples of a water control structure may include a bridge, culvert, dam, embankment, ford (if above grade), retaining wall, and weir.

  • Single tomogram system means a CT x-ray system which obtains x-ray transmission data during a scan to produce a single tomogram.

  • Property management system means the Contractor’s system or systems for managing and controlling Government property.

  • Primary dose monitoring system means a system which will monitor the useful beam during irradiation and which will terminate irradiation when a preselected number of dose monitor units have been delivered.

  • Processing facility means an establishment that prepares, treats, or converts tangible personal property into finished goods or another form of tangible personal property. The term includes a business engaged in processing agricultural, aquacultural, or maricultural products and specifically includes meat, poultry, and any other variety of food processing operations. It does not include an establishment in which retail sales of tangible personal property are made to retail customers.

  • Interconnection Activation Date means the date that the construction of the joint facility Interconnection arrangement has been completed, trunk groups have been established, joint trunk testing is completed and trunks have been mutually accepted by the Parties.