Sound wave definition

Sound wave means the repeating cycles of high pressure and low pressure that are made by a vibrating object.
Sample 1Sample 2Sample 3
Sound wave means the repeating cycles of high pres- sure and low pressure that are made by a vibrating object.
Sample 1Sample 2
Sound wave means the repeating cycles of high pressure and low pressure that are made by a vibrating object. 62.72.“Special education” has the same meaning as in A.R.S. § 15-761.
Sample 1

Examples of Sound wave in a sentence

  • Data from this monitoring program, along with state-provisioned datasets including vegetation line data (five-yearly from 1990 to 2020), aerial imagery (five-yearly since 1990), tide gauge data (continuous from 1980 to 2020), and offshore Banksia Sound wave buoy data (continuous from 1995 to 2020) were used to inform the 2020 CHRMAP’s coastal hazard assessment component.

  • MARS has also been 13.0 2.5 2.0ℑ(γ0 τW) Sound wave (κll = 0.5)(b)used to predict the sta- bilizing effect of plasma 0 rotation in DIII-D ATscenarios.

  • Sound wave frequency is measured in Hertz (Hz), which corresponds to the number of cycles per second.

  • Sound wave, velocity of waves in elastic media, acoustic, impedance, intensity and intensity level, damping, resonance, standing waves, Doppler effect, and ultrasound, the ear and hearing, heat and first law of thermodynamic, heat transfer and thermal properties of gases.

  • A lock-in amplifier attached to the system measures the current at the sound Figure 26: Sound wave experimental Setup.

  • Sound wave propagating in different medium with different velocity with the order solid > liquid > gas.

  • The Sound wave is a mechanical wave but light waves, infra red rays, X-rays, microwaves, Radio waves etc.

  • Sound wave can be in form of mechanical wave, it is a wave which requires a material medium for its propagation.

  • The theory is however limited to compact simple conver- gent or divergent nozzle configurations where the wavelength of a perturbation constant in the r − ϕ Initial Entropy or Sound wave Figure 8.

  • Sound wave propagation is such an example (and volume-mass diffusion models have been shown to give surprisingly good predictions for this [8]).

Related to Sound wave

  • Bulk Electric System shall have the meaning provided for in the NERC Glossary of Terms used in Reliability Standards, as it may be amended, supplemented, or restated from time to time.

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV < Un 44 kV. [SANS 1019]

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (μg/m3);

  • NEC Electronics as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries.

  • Exempt Renewable Technology means, in all Mitigated Capacity Zones, an Intermittent Power Resource solely powered by wind or solar energy.

  • Fuel cell means an energy converter transforming chemical energy (input) into electrical energy (output) or vice versa.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • SOUND NATURAL TEETH means teeth that: SPECIALTY PRESCRIPTION DRUG is a type of prescription drug listed on our

  • Powertrain means the total combination in a vehicle of propulsion energy storage system(s), propulsion energy converter(s) and the drivetrain(s) providing the mechanical energy at the wheels for the purpose of vehicle propulsion, plus peripheral devices.

  • NEC Electronics products means any product developed or manufactured by or for NEC Electronics (as defined above).

  • Commercial Software means Software developed or regularly used that: (i) has been sold, leased, or licensed to the general public; (ii) has been offered for sale, lease, or license to the general public; (iii) has not been offered, sold, leased, or licensed to the public but will be available for commercial sale, lease, or license in time to satisfy the delivery requirements of this Contract; or (iv) satisfies a criterion expressed in (i), (ii), or (iii) above and would require only minor modifications to meet the requirements of this Contract.

  • Fissile material means the radionuclides uranium-233, uranium-235, plutonium-239, and plutonium-241, or any combination of these radionuclides. "Fissile material" means the fissile nuclides themselves, not material containing fissile nuclides. Unirradiated natural uranium and depleted uranium and natural uranium or depleted uranium, that has been irradiated in thermal reactors only, are not included in this definition. Certain exclusions from fissile material controls are provided in 10 CFR 71.15.

  • License plate means a device containing letters, numerals, or a combination of both, attached to a

  • Fabrication means making up data or results and recording or reporting them.

  • TELRIC means Total Element Long-Run Incremental Cost.

  • IOSCO means the International Organisation of Securities Commissions.

  • Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.

  • cannabis resin means the separated resin, whether crude or purified, obtained from any plant of the genus Cannabis;

  • Beam axis means a line from the source through the centers of the x-ray fields.

  • Heat input means the product (expressed in mmBtu/time) of the gross calorific value of the fuel (expressed in Btu/lb) and the fuel feed rate into the combustion device (expressed in mass of fuel/time) and does not include the heat derived from preheated combustion air, recirculated flue gases, or ex- haust from other sources.

  • Flexible vinyl adhesive means an aerosol adhesive designed to bond flexible vinyl to substrates. Flexible vinyl means a nonrigid polyvinyl chloride plastic with at least five percent, by weight, of plasticizer content. A plasticizer is a material, such as a high boiling point organic solvent, that is incorporated into a vinyl to increase its flexibility, workability, or distensibility, and may be determined using ASTM Method E260-91 or from product formulation data.

  • nanomaterial means a natural, incidental or manufactured material containing particles in an unbound state or as an aggregate or as an agglomerate and where, for 50 % or more of the particles in the number size distribution, one or more external dimensions is in the size range 1-100 nm;

  • Beam scattering foil means a thin piece of material (usually metallic) placed in the beam to scatter a beam of electrons in order to provide a more uniform electron distribution in the useful beam.

  • Nuclear medicine technologist means an individual who holds a current certification with the American Registry of Radiological Technologists or the Nuclear Medicine Technology Certification Board.

  • Assistive technology device means any item, piece of equipment, or product system that is used to increase, maintain, or improve the functional capacities of a child with a disability.

  • Commercial solid waste means all types of solid waste generated by stores, offices, restaurants, warehouses, and other nonmanufacturing activities, excluding residential and industrial wastes.