Standard Methods for the Examination of Water and Wastewater definition

Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by the American Public Health Association, the American Waterworks Association and the Water Environment Federation;
Sample 1Sample 2Sample 3
Standard Methods for the Examination of Water and Wastewater means that standard which, for the purposes of this chapter, is the recognized standard that provides the protocol for the microbiological water quality standards for all public recreational bathing places and may be obtained from the American Public Health Association.
Sample 1Sample 2Sample 3
Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by
Sample 1Sample 2

Examples of Standard Methods for the Examination of Water and Wastewater in a sentence

  • Standard Methods for the Examination of Water and Wastewater describes dechlorination of samples (APHA, 1992).

  • The test methodology used shall be from Part 2540 G of Standard Methods for the Examination of Water and Wastewater American Public Health Association, American Water Works Association, and Water Environment Federation, using the edition which is current on the issuance date of the permit.

  • The test methodology used shall be from the latest edition, Part 2540 G of Standard Methods for the Examination of Water and Wastewater American Public Health Association, American Water Works Association, and Water Environment Federation.

  • The sample aliquots must be collected and stored in accordance with procedures prescribed in the most recent edition of Standard Methods for the Examination of Water and Wastewater.

  • Total Residual Chlorine may be performed using any of the following methods provided the required minimum limit (ML) is met.• APHA Standard Methods for the Examination of Water and Wastewater , 21st Edition-Method 4500-CL E Low Level Amperometric Titration-Method 4500-CL G DPD Colorimetric Method• USEPA 1983.

  • The additional analysis that must be performed under this protocol is as specified and noted in the table below.Parameter Effluent ReceivingHardness1, 4xx0.5Total Residual Chlorine (TRC)2, 3, 4x 0.02Alkalinity4xx2.0pH4xx--Specific Conductance4 Total Solids 6WaterML (mg/l) Total Metals 5• APHA Standard Methods for the Examination of Water and Wastewater , 21st Edition-Method 2340B (hardness by calculation)-Method 2340C (titration)2.

  • Where collection, preservation, and handling procedures are not outlined in 40 CFR 136.3, procedures outlined in the 18th edition of Standard Methods for the Examination of Water and Wastewater shall be used.

  • Where collection, preservation, and handling procedures are not outlined in 40 CFR § 136.3, procedures outlined in the 18th edition of Standard Methods for the Examination of Water and Wastewater shall be used.

  • Standard Methods for the Examination of Water and Wastewater, 20th Edition.

  • Standard Methods for the Examination of Water and Wastewater, 20th ed.


More Definitions of Standard Methods for the Examination of Water and Wastewater

Standard Methods for the Examination of Water and Wastewater means "Standard Methods for the Examination of Water and Wastewater, 21st Edition, American Public Health Association, American Water Works Association and Water Environment Federation, 2005." This document is available on theinternet at http://www.standardmethods.org/.
Sample 1
Standard Methods for the Examination of Water and Wastewater means that standard which, for the purposes of this chapter, is the recognized standard
Sample 1
Standard Methods for the Examination of Water and Wastewater means the 18th edition (including the Supplement) as published by the American Water Works Association (AWWA)/American Public Health Association, or the most current subsequent edition of this publication. STORMWATER means all surface water run-off resulting from precipitation. TANKERED WASTE is water or other liquid, including waste matter in solution or suspension, which is conveyed by vehicle for disposal. TERRITORIAL AUTHORITY (TA) means a city council, or district council. TRADE PREMISES means any premises used or intended to be used for carrying on any trade or industry, and includes any land or premises wholly or mainly used for agricultural or horticultural purposes. TRADE WASTE is any liquid, with or without matter in suspension or solution, that is or may be discharged from a trade premises in the course of any trade or industrial process or operation, or in the course of any activity or operation of a like nature; but does not include condensing or cooling waters; stormwater, or domestic sewage. WASTEWATER means water or other liquid, including waste matter in solution or suspension, discharged from a premises to a sewer. WASTEWATER AUTHORITY (WWA) means the unit of a territorial authority including its authorized agents, responsible for the collection, treatment and disposal of wastewater.
Sample 1
Standard Methods for the Examination of Water and Wastewater means the approval methods developed by the APHA, the AWWA and the Water Environmental Federation. The current standard methods are contained in the 20th Edition, published by the AWWA.
Sample 1
Standard Methods for the Examination of Water and Wastewater means the latest edition, including any amendments and supplements, as published by the American Water Works Association (AWWA)/American Public Health Association/Water Environment Federation).
Sample 1

Related to Standard Methods for the Examination of Water and Wastewater

  • Process Wastewater means any water which, during manufacturing or processing, comes into direct contact with or results from the production or use of any raw material, intermediate product, finished product, by-product, or waste product.

  • Stormwater management measure means any practice, technology, process, program, or other method intended to control or reduce stormwater runoff and associated pollutants, or to induce or control the infiltration or groundwater recharge of stormwater or to eliminate illicit or illegal non-stormwater discharges into stormwater conveyances.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Stormwater runoff means water flow on the surface of the ground or in storm sewers, resulting from precipitation.

  • Cathodic protection tester means a person who can demonstrate an understanding of the principles and measurements of all common types of cathodic protection systems as applied to buried or submerged metal piping and tank systems. At a minimum, such persons must have education and experience in soil resistivity, stray current, structure-to-soil potential, and component electrical isolation measurements of buried metal piping and tank systems.

  • Structural pest control means a use requiring a license under Chapter 14 (commencing with Section 8500), Division 3, of the Business and Professions Code.

  • Subsurface Borings and Testing means borings, probings and subsurface explorations, laboratory tests and inspections of samples, materials and equipment; appropriate professional interpretations of all the foregoing.

  • Stormwater management planning area means the geographic area for which a stormwater management planning agency is authorized to prepare stormwater management plans, or a specific portion of that area identified in a stormwater management plan prepared by that agency.

  • Tomographic plane means that geometric plane which is identified as corresponding to the output tomogram.

  • Stormwater management plan means the set of drawings and other documents that comprise all the information and specifications for the programs, drainage systems, structures, BMPs, concepts and techniques intended to maintain or restore quality and quantity of stormwater runoff to pre-development levels.

  • Stormwater means water resulting from precipitation (including rain and snow) that runs off the land’s surface, is transmitted to the subsurface, or is captured by separate storm sewers or other sewage or drainage facilities, or conveyed by snow removal equipment.