Steel joist definition

Steel joist means an open web, secondary load-carrying member which is 144 feet (43.9 m) or less, which is designed by the manufacturer, and which is used for the support of floors and roofs. This does not include structural steel trusses or cold-formed joists.
Steel joist means an open web, secondary load-carrying member of 144 feet (43.9 m) or less, designed by the manufacturer, used for the support of floors and roofs. This does not include structural steel trusses or cold-formed joists.
Steel joist means an open web, secondary load-carrying member of 144 feet or less, designed by the manufacturer, used for the support of floors and roofs. This does not include structural steel trusses or cold-formed joists.

Examples of Steel joist in a sentence

  • The Rolled Steel joist (RSJ) support structures shall be fabricated from mild steel, grade A and in lengths dictated by design parameters.

  • Steel joist placement plans shall be provided to show the steel joist products as specified on the approved construction documents and are to be utilized for field installation in accordance with specific project requirements as stated in Section 2207A.2. Steel joist placement plans shall include, at a minimum, the following: … Steel joist placement plans do not require the seal and signature of the joist manufacturer's registered design professional.

  • Steel joist and girder second floor system with concrete and metal deck (if multi-story building).

  • Steel joist and Joist Girder extensions shall be specified and designed in accordance with the requirements of the Steel Joist Institute Standard Specifications of latest adoption.

  • Deck weld special inspection shall also satisfy requirements in Table 1705A.2.1 and Section 1705A.2.5.… 1705A.2.3.1 1705A.2.2.3 Steel joist and joist girder inspection.

  • Steel joist/ girder clamping components may operatewithin a smaller range as these are cantilevered applications, and therefore may have to sustain more onerous forces.

  • Deck weld special inspection shall also satisfy requirements in Table 1705A.2.1 and 1705A.2.5.… 1705A.2.3.1 1705A.2.2.3 Steel joist and joist girder inspection.

  • Steel joist placement plans shall be provided to show the steel joist products as specified on the approved construction documents and are to be utilized for field installation in accordance with specific project requirements as stated in Section 2207A.2. Steel joist placement plans shall include, at a minimum, the following:…Steel joist placement plans do not require the seal and signature of the joist manufacturer's registered design professional.… 2207A.6 Joist Chord Bracing.

  • Steel joist or light steel construction with metal roof deck, insulation, and Class A or B built-up roof covering.e 12-1.1 Gypsum-vermiculite plaster on metal lath wire tied at 6" intervals to ¾" furring channels spaced 12" on center and wire tied to 2" runner channels spaced 32" on center.

  • Deck weld special inspection shall also satisfy requirements in Table 1705A.2.1 and Section 1705A.2.5. … 1705A.2.3.1 1705A.2.2.3 Steel joist and joist girder inspection.

Related to Steel joist

  • Steel means an alloy that includes at least 50 percent iron, between .02 and 2 percent carbon, and may include other elements.

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).

  • Drum means any cylindrical metal shipping container of 13 to 110 gallon capacity.

  • Topcoat means a coating that is applied over a primer on an aerospace vehicle or component for appearance, identification, camouflage, or protection. Topcoats that are defined as specialty coatings are not included under this definition.

  • Semitrailer means every vehicle of the trailer type so designed and used in conjunction with a

  • Flow coating means a coating labeled and formulated exclusively for use by electric power companies or their subcontractors to maintain the protective coating systems present on utility transformer units.

  • snippet shall have the meaning set out at Recital A;","hash":"813a6ffb30076cb349f66a8364b0fb3a","id":6},{"size":1,"snippetLinks":[{"key":"meaning","type":"clause","offset":[8,15]},{"key":"set","type":"clause","offset":[16,19]},{"key":"the-recitals","type":"clause","offset": [29,41]}],"samples":[{"uri":"/contracts/jhwMa33a02i#assignment-letter","label":"License and Supply Agreement (Vivus Inc)","score":21}],"snippet":"has the meaning set forth in the Recitals.","hash":"8147307746bce1e7e7ce0d9d9441a89a","id":7},{"size":1,"snippetLinks":[{"key":"the-particulars","type":"clause","offset":[6,21]},{"key":"assignment- to","type":"clause","offset":[29,42]},{"key":"performed-by","type":"clause","offset":[46,58]},{"key":"associate","type":"clause","offset":[63,72]}],"samples":[{"uri":"/contracts/kaNWrTtfjki#assignment-letter","label":"Agreement and Terms of Business","score":21}],"snippet":"means the particulars of the Assignment to be performed by the Associate.","hash":"bd75f1727aae028050aeece2ac32060a","id":8},{"size":1,"snippetLinks":[{"key":"that-certain","type":"definition","offset":[6,18]},{"key":"assignment","type":"clause","offset":[19,29]},{"key":"side-letter","type":"clause","offset":[30,41]},{"key":"dated-as-of","type":"definition","offset":[43,54]},{"key":"date- hereof","type":"clause","offset":[59,70]},{"key":"borrower","type":"clause","offset":[78,86]},{"key":"administrative-agent-and-lenders","type":"clause","offset":[88,120]}],"samples":[{"uri":"/contracts/84rXUsuvT9Q#assignment-letter","label":"Financing Agreement (TherapeuticsMD, Inc.)","score":21}],"snippet":"means that certain Assignment Side Letter, dated as of the date hereof, among Borrower, Administrative Agent and Lenders.","hash":"542ac5f8004066ce75a5a5108ba840c2","id":9}],"nextCurs":""}} id=pagination-first-page> , known to be the person(s) who executed the previous instrument.

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.

  • E-cigarette means any electronic oral device, such as one composed of a heating element and battery or electronic circuit, or both, which provides a vapor of nicotine or any other substances, and the use or inhalation of which simulates smoking. The term shall include any such device, whether manufactured, distributed, marketed, or sold as an e-cigarette, e-cigar, and e-pipe or under any other product, name, or descriptor.

  • IOSCO means the International Organisation of Securities Commissions.

  • Single Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in a single homogeneous phase and which does not require that the product container be shaken before use.

  • Plastics means synthetic materials chemically formed by the polymerization of organic (carbon-based) substances. Plastics are usually compounded with modifiers, extenders, and/or reinforcers and are capable of being molded, extruded, cast into various shapes and films or drawn into filaments.

  • Camper means a structure designed, used, and maintained primarily to be

  • Edge of any water means the outer edge of the water's bankfull width or, where applicable, the outer edge of the associated channel migration zone.

  • Hood means a respiratory inlet covering that completely covers the head and neck and may also cover portions of the shoulders and torso.

  • Plastic means material which contains as an essential ingredient a high polymer such as polyethylene terephthalate, high density polyethylene, Vinyl, low density polyethylene, polypropylene, polystyrene resins, multi-materials like acrylonitrile butadiene styrene, polyphenylene oxide, polycarbonate, Polybutylene terephthalate;

  • Polyolefin Adhesive means an aerosol adhesive designed to bond polyolefins to substrates.

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per million.

  • Flexible vinyl adhesive means an aerosol adhesive designed to bond flexible vinyl to substrates. Flexible vinyl means a nonrigid polyvinyl chloride plastic with at least five percent, by weight, of plasticizer content. A plasticizer is a material, such as a high boiling point organic solvent, that is incorporated into a vinyl to increase its flexibility, workability, or distensibility, and may be determined using ASTM Method E260-91 or from product formulation data.

  • Stinger-steered automobile or watercraft transporter means an automobile or watercraft transporter

  • Specialty coating means a coating that, even though the coating meets the definition of a primer, topcoat, or self-priming topcoat, has additional performance criteria beyond those of primers, topcoats, and self-priming topcoats for specific applications. These performance criteria may include, but are not limited to, temperature or fire resistance, substrate compatibility, antireflection, temporary protection or marking, sealing, adhesively joining substrates, or enhanced corrosion protection. A listing of specialty coatings is found in paragraph (D)(1)(b) of rule 3745-21-19 of the Administrative Code.

  • Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.

  • Double Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in two or more distinct phases that requires the product container be shaken before use to mix the phases, producing an emulsion.

  • Airside means, generally, those areas of an Airport which requires a person to pass through a security checkpoint to access. References to "sterile areas" generally mean Airside areas within terminal buildings. References to "Airfield", "Aircraft Operations Area", "AOA", or "Secured areas" generally mean outdoor Airside areas or areas not accessible to passengers.

  • snippetLinks [{"key":"specifically","type":"clause","offset":[20,32]},{"key":"provided-herein","type":"clause","offset":[33,48]},{"key":"at-the-closing","type":"clause","offset":[50,64]},{"key":"the-parties-shall","type":"clause","offset":[65,82]},

  • Double check valve assembly means an assembly composed of two single, independently acting, check valves including tightly closing shutoff valves located at each end of the assembly and suitable connections for testing the water tightness of each check valve.