Strand Mounted definition

Strand Mounted means small wireless antenna(s) and equipment attached directly to the wire hanging between two utility poles.
Strand Mounted means (Newpath Networks to provide definition).
Strand Mounted means (Zayo to provide definition).

Examples of Strand Mounted in a sentence

  • Refer to the utility company for specific requirements and approvals.Figure 3.1 Attachments To Utility Poles Type A – Utility Mounted Pole Type B – Strand Mounted *This equipment will be attached to existing wooden utility poles located within PCMC’s right of way, all equipment installations shall be approved by the appropriate utility.

  • Strand Mounted Equipment must be installed and maintained in accordance with the requirements of all applicable Specifications set forth in Article 7 and Verizon’s requirements.

  • Exception: one additional equipment shroud may be allowed per pole if the antenna is located within the second equipment shroud.E• Strand Mounted Equipment Shroud- 9.0 cubic feet maximum strand mount equipment shroud.

  • A communications facility does not include the pole, communication wiring (in the case of Strand Mounted Antennas, as the term is defined herein), tower or support structure to which the equipment is attached.

  • Type 6 - Strand Mounted Facilities are Wireless Communication Facilities in which the antennas, cables and lines, and radio equipment are mounted on an existing aerial cable.

  • If the sanction imposed is suspension or dismissal from the residence hall, the appeal shall be made directly to the College’s Chief Student Affairs Officer or designee and not to the RHD or other residence hall staff member, even if they were not involved in the case at an earlier stage.

  • Figure 3.1 Attachments To Utility Poles Type A – Utility Mounted Pole Type B – Strand Mounted *This equipment will be attached to existing wooden utility poles located within PCMC’s right of way, all equipment installations shall be approved by the appropriate utility.

  • If allowed in a Design District, each Type 6 – Strand Mounted Facility shall comply with the specific design requirements included in Section 5.02.130.5.02.120 – GENERAL ROW DESIGN STANDARDS.

Related to Strand Mounted

  • NBOME means the National Board of Osteopathic Medical Examiners, an organization that prepares and administers qualifying examinations for osteopathic physicians.

  • Polyolefin Adhesive means an aerosol adhesive designed to bond polyolefins to substrates.

  • SBS means the New York City Department of Small Business Services.

  • Hair mousse means a hairstyling foam designed to facilitate styling of a coiffure and provide limited holding power.

  • Moderator means, in connection with this DPA, a verified adult affiliated with and authorized by the Educational Institution to moderate a Student Account or a Classroom, as permitted by the Service.

  • Flexible vinyl adhesive means an aerosol adhesive designed to bond flexible vinyl to substrates. Flexible vinyl means a nonrigid polyvinyl chloride plastic with at least five percent, by weight, of plasticizer content. A plasticizer is a material, such as a high boiling point organic solvent, that is incorporated into a vinyl to increase its flexibility, workability, or distensibility, and may be determined using ASTM Method E260-91 or from product formulation data.

  • Firefighter means any regular, paid or volunteer, member of a lawfully constituted fire department of a municipal corporation, township, fire district, or village.

  • Radiation therapy simulation system means a radiographic or fluoroscopic x-ray system intended for localizing the volume to be exposed during radiation therapy and confirming the position and size of the therapeutic irradiation field.

  • Irradiation means the exposure of a living being or matter to ionizing radiation.

  • Aerosol adhesive means any adhesive packaged as an aerosol product in which the spray mechanism is permanently housed in a nonrefillable can designed for hand-held application without the need for ancillary hoses or spray equipment. Aerosol adhesives include special purpose spray adhesives, mist spray adhesives, and web spray adhesives.

  • KDOT means the Kansas Department of Transportation, an agency of the State of Kansas, with its principal place of business located at 700 SW Harrison Street, Topeka, KS, 66603-3745.

  • Beam monitoring system means a system designed and installed in the radiation head to detect and measure the radiation present in the useful beam.

  • EG means the Enforcement Guide;

  • Double Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in two or more distinct phases that requires the product container be shaken before use to mix the phases, producing an emulsion.

  • Single Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in a single homogeneous phase and which does not require that the product container be shaken before use.

  • Digital Cross Connect System or "DCS" is a function which provides automated Cross Connection of Digital Signal Level 0 (DS0) or higher transmission bit rate digital channels within physical interface facilities. Types of DCS include but are not limited to DCS 1/0s, DCS 3/1s, and DCS 3/3s, where the nomenclature 1/0 denotes interfaces typically at the DS1 rate or greater with Cross Connection typically at the DS0 rate. This same nomenclature, at the appropriate rate substitution, extends to the other types of DCS specifically cited as 3/1 and 3/3. Types of DCS that cross connect Synchronous Transport Signal level 1 (STS-1 s) or other Synchronous Optical Network (SONET) signals (e.g., STS-3) are also DCS, although not denoted by this same type of nomenclature. DCS may provide the functionality of more than one of the aforementioned DCS types (e.g., DCS 3/3/1 which combines functionality of DCS 3/3 and DCS 3/1). For such DCS, the requirements will be, at least, the aggregation of requirements on the "component" DCS. In locations where automated Cross Connection capability does not exist, DCS will be defined as the combination of the functionality provided by a Digital Signal Cross Connect (DSX) or Light Guide Cross Connect (LGX) patch panels and D4 channel banks or other DS0 and above multiplexing equipment used to provide the function of a manual Cross Connection. Interconnection is between a DSX or LGX to a Switch, another Cross Connection, or other service platform device.

  • Transient guest means a natural person staying less than 30 consecutive days.

  • Translucent means a substance that allows light to pass through, but does not allow an object or person to be seen through the substance.

  • Radiation therapist means a person, other than a Licensed Practitioner or Nuclear Medicine Technologist, who applies radiation to humans for therapeutic purposes under the supervision of a Licensed Practitioner;

  • Alloy means a metal consisting of a mixture of a basic metallic element and one or more metallic, or non-metallic, alloying elements.

  • snippetLinks [{"key":"specifically","type":"clause","offset":[20,32]},{"key":"provided-herein","type":"clause","offset":[33,48]},{"key":"at-the-closing","type":"clause","offset":[50,64]},{"key":"the-parties-shall","type":"clause","offset":[65,82]},

  • TELRIC means Total Element Long-Run Incremental Cost.

  • The Works/Project means the works to be executed or done under this contract.

  • generating station or “station” means any station for generating electricity, including any building and plant with step-up transformer, switch-gear, switch yard, cables or other appurtenant equipment, if any, used for that purpose and the site thereof; a site intended to be used for a generating station, and any building used for housing the operating staff of a generating station, and where electricity is generated by water-power, includes penstocks, head and tail works, main and regulating reservoirs, dams and other hydraulic works, but does not in any case include any sub-station;

  • Primary dose monitoring system means a system which will monitor the useful beam during irradiation and which will terminate irradiation when a pre-selected number of dose monitor units have been delivered.

  • Cabinet x-ray system means an x-ray system with the x-ray tube installed in an enclosure independent of existing architectural structures except the floor on which it may be placed. The cabinet x-ray system is intended to contain at least that portion of a material being irradiated, provide radiation attenuation, and exclude personnel from its interior during generation of radiation. Included are all x-ray systems designed primarily for the inspection of carry-on baggage at airline, railroad, and bus terminals, and in similar facilities. An x-ray tube used within a shielded part of a building, or x-ray equipment that may temporarily or occasionally incorporate portable shielding, is not considered a cabinet x-ray system.