System Fault definition

System Fault means a fault, malfunction or error in KEPSS such that the System is unable to perform the functions it is required to perform for the time being.
Sample 1Sample 2
System Fault is a minor malfunction with an area of the ‘application software’ and/or the ‘services’.
Sample 1Sample 2
System Fault means a fault, malfunction or error in KEPSS such that the System is unable to perform its functions.
Sample 1

Examples of System Fault in a sentence

  • IS System Fault Management These Guidelines provide the framework that the Parties will use to manage faults or failures in IS Systems leading to a potential loss of data to another Party and details the support required from other Parties to resolve and achieve a return to normal service.

  • CDCCLs are a means of identifying certain design configuration features intended to preclude a fuel tank ignition source for the operational life of the airplane as required under Special Federal Aviation Regulation No. 88 (SFAR 88) – Fuel Tank System Fault Tolerance Evaluation Requirements and Title 14 CFR § 25.981 – Fuel Tank Ignition Prevention.

  • Communications for SCADA and Telemetry must function at the full performance level before, during and after any Power System Fault condition.

  • CDCCLs are a means of identifying certain design configuration features intended to preclude a fuel tank ignition source for the operational life of the airplane as required under Special Federal Aviation Regulation No. 88 (SFAR 88) - Fuel Tank System Fault Tolerance Evaluation Requirements and Title 14 CFR § 25.981 - Fuel Tank Ignition Prevention.

  • A break in continuity between these two wires will simulate a Wet probe, and cause a System Fault.

  • Communications for Control and Protection must function at the full performance level before, during, and after any Power System Fault condition.

  • Note that, if we consider that a system iscomposed of components, we can observe possible causal relations between failure of one or several components and failure of the system: Component System Fault 🡪 Error 🡪 Failure 🡪 Fault 🡪 Error 🡪 Failure Figure 5: Failure propagation Usually, two classes of faults can be distinguished according to their effects inside a system: Byzantine faults and coherent faults.

  • Table 9 provides fault finding and problem solving procedures for the recovery system.Table 8 Recovery System Fault Finding SymptomProbable Cause UNCONTROLLED IF PRINTEDPNEUMATIC SYSTEM PNEUMATIC SUPPLY MANIFOLD159.

  • Since this condition cannot naturally exist, any indication of such will trigger the System Fault yellow flashing LED and the RL5.

  • Runtime and System Fault Text Runtime and System Fault Code Description ResolutionSupply bag overweight -04010020There is more 15kg of weight on the supply bag hook.Remove all weight from supply hooks and reboot the systemWaste bag overweight -02010021There is more 15kg of weight on the waste bag hook.Remove all weight from waste hooks and reboot the systemVarious Text -04XXXXXXVarious Runtime FaultsTurn power off, and then on.


More Definitions of System Fault

System Fault means a fault, malfunction or error in MACSS such that MACSS is unable to perform the functions it is required to perform for the time being.
Sample 1

Related to System Fault

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Net Metering Net metering refers to customers who sell electricity they produce, typically through a rooftop solar panel, back to the utility for credit. If you are a net metering customer, you should not enroll with XOOM because your net metering agreement will not transfer to XOOM once you enroll.

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Signaling System 7 (SS7) means a signaling protocol used by the CCS Network.

  • system user means a natural or legal person supplying to, or being supplied by, a transmission or distribution system;

  • Net metering system means a facility for the production of electrical energy that:

  • explosive actuated fastening device means a tool that is activated by an explosive charge and that is used for driving bolts, nails and similar objects for the purpose of providing fixing;

  • Common Channel Signaling (CCS) means an out-of-band, packet-switched, signaling network used to transport supervision signals, control signals, and data messages. It is a special network, fully separate from the transmission path of the public switched network. Unless otherwise agreed by the Parties, the CCS protocol used by the Parties shall be SS7.

  • Common Channel Signaling (CCS means an out-of-band, packet-switched, signaling network used to transport supervision signals, control signals, and data messages. It is a special network, fully separate from the transmission path of the public switched network. Unless otherwise agreed by the Parties, the CCS protocol used by the Parties shall be SS7.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • CT gantry means the tube housing assemblies, beam-limiting devices, detectors, and the supporting structures and frames which hold these components.

  • Signaling System 7 (SS7 means a signaling protocol used by the CCS Network.

  • smart metering system means an electronic system that is capable of measuring electricity fed into the grid or electricity consumed from the grid, providing more information than a conventional meter, and that is capable of transmitting and receiving data for information, monitoring and control purposes, using a form of electronic communication;

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than one micrometer is rejected by an engineered barrier, primarily through a size exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Outlet means a location other than a state store or package agency where

  • Beam scattering foil means a thin piece of material (usually metallic) placed in the beam to scatter a beam of electrons in order to provide a more uniform electron distribution in the useful beam.

  • Anaerobic digester means a liquid manure storage area that is constructed with the intent to capture and combust gas emissions resulting from the digestion of waste by microbes in anaerobic conditions. An anaerobic digester is a LMSA and is required to comply with all requirements applicable to LMSAs. Requirements specific to anaerobic digesters will be noted when applicable.

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV < Un 44 kV. [SANS 1019]

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Custom Local Area Signaling Service Features (CLASS) means certain call-management service features that are currently available from SBC-13STATE’s local networks. These could include: Automatic Call Back; Automatic Recall; Call Trace; Caller Identification and related blocking features; Calling Number Delivery; Customer Originated Trace; Distinctive Ringing/Call Waiting; Selective Call Forward; and Selective Call Rejection.

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • Nominal tomographic section thickness means the full width at half-maximum of the sensitivity profile taken at the center of the cross-sectional volume over which x-ray transmission data are collected.