Toe guards definition

Toe guards means the guards that fit over the toes of regular shoes to protect the toes from impact and compression hazards. These guards may be attached to the outside of shoes.

Examples of Toe guards in a sentence

  • In addition, to the best of Contractor’s knowledge, any subcontractor employed by Contractor as a part of this contract shall be in compliance with the requirements of E-Verify and N.C.G.S. §64-25 et seq.

  • Toe guards shall be provided and secured around the bridge walkway, which shall not be less than 100 mm high and 5 mm thick.Bridge support and end carriage: -The bridge structure shall be supported at the peripheral walls of clarification and flocculation zones & in center shall be guided by means of central guide assembly.Oil fills and drain points, where applicable shall be extended to provide a convenient access for filling and draining the system.

  • Toe guards similar to those provided to the car door sill shall be provided beneath each landing door sill.

  • Toe guards shall be provided and secured around the bridge walkway, which shall not be less than 100 mm high and 5 mm thick.The bridge structure shall be supported at the peripheral walls of clarifier and & in center shall be guided by means of central bearing assembly.Oil fills and drain points, where applicable shall be extended to provide a convenient access for filling and draining the system.

  • Toe guards shall be provided and secured around the bridge walkway, which shall not be less than 100 mm high and 5 mm thick.

  • Toe guards have been designed for the men to wear when operating machines like air hammers, concrete breakers etc.• For working on electrical equipment suitable safety shoes must be used.

  • Toe guards shall be provided and secured around the bridge walkway, which shall not be less than 100 mm high and 5 mm thick.The bridge structure shall be supported at the peripheral walls of clarification and flocculation zones & in center shall be guided by means of central bearing assembly.Oil fills and drain points, where applicable shall be extended to provide a convenient access for filling and draining the system.

  • Toe guards are not acceptable substitutes for permanent safety shoes.

  • Toe guards have been designed for the men to wear when operating machines as air hammers, concrete breakers etc.

  • Toe guards shall be of at least 1,5 mm thick steel and shall be installed on all landings.

Related to Toe guards

  • Houseboat means watercraft primarily used as habitation and not used primarily as a means of transportation.

  • Caseworker means a PCSA, PCPA or PNA staff person who is responsible for provision of protective services or supportive services to the child and his parent, guardian, custodian or substitute caregiver.

  • Laundry prewash means a product that is designed for application to a fabric prior to laundering and that supplements and contributes to the effectiveness of laundry detergents and/or provides specialized performance.

  • Technical safeguards means the technology and the policy and procedures for its use that 27 protect electronic PHI and control access to it.

  • Safety Management System means a systematic approach to managing safety, including the necessary organisational structures, accountabilities, policies and procedures;

  • Tug or “Tugs”: shall mean the tugboats provided or arranged by XXXXX to perform the requested services.

  • Electrical protection barrier means the part providing protection against any direct contact to the high voltage live parts.

  • Cathodic protection tester means a person who can demonstrate an understanding of the principles and measurements of all common types of cathodic protection systems as applied to buried or submerged metal piping and tank systems. At a minimum, such persons must have education and experience in soil resistivity, stray current, structure-to-soil potential, and component electrical isolation measurements of buried metal piping and tank systems.

  • Machine gun means any firearm known as a machine gun,

  • Procurement Code means §13-1-101, et seq., XXXX 0000, as amended and supplemented from time to time.

  • Supplier of Last Resort means a supplier who is designated by a Member State to take over the supply of electricity to customers of a supplier which has ceased to operate;

  • Security alarm system means a device or series of devices, intended to summon law enforcement personnel during, or as a result of, an alarm condition. Devices may include hard- wired systems and systems interconnected with a radio frequency method such as cellular or private radio signals that emit or transmit a remote or local audible, visual, or electronic signal; motion detectors, pressure switches, duress alarms (a silent system signal generated by the entry of a designated code into the arming station to indicate that the user is disarming under duress); panic alarms (an audible system signal to indicate an emergency situation); and hold-up alarms (a silent system signal to indicate that a robbery is in progress).

  • Cathodic protection means a technique designed to prevent the corrosion of a metal surface by making that surface the cathode of an electrochemical cell. For example, protection can be accomplished with an impressed current system or a galvanic anode system.

  • Security Management Plan means the Supplier's security management plan prepared pursuant to paragraph 3 of schedule 2 an outline of which is set out in paragraph 2.7 of the Order Form as updated from time to time;

  • carriageway means a way constituting or comprised in a highway being a way (other than a cycle track) over which the public have a right of way for the passage of vehicles;

  • Procurement Management means the Director of Lee County’s Procurement Management Department or designee.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Motorway means a road specially designed and built for motor traffic, which does not serve properties bordering on it, and which:

  • Sailboat means the same as that term is defined in Section 73-18-2.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Agency Worker means the individual who is Introduced by the Employment Business to provide services to the Hirer;

  • Enplanements means the total number of passengers boarding airline carriers. For purposes of this Section 4.14, all Enplanement comparisons shall be done by Relevant Boarding Area.

  • Procurement Agent means the district representative duly authorized to enter into and administer Contracts and make written determinations with respect to this solicitation or his/ her designee.

  • Heat input means the product (expressed in mmBtu/time) of the gross calorific value of the fuel (expressed in Btu/lb) and the fuel feed rate into the combustion device (expressed in mass of fuel/time) and does not include the heat derived from preheated combustion air, recirculated flue gases, or ex- haust from other sources.

  • Tugs means dedicated vessels that push or pull other vessels in ports, harbors, and inland waterways (e.g., tugboats and towboats).

  • Hookah means a water pipe and any associated products and devices which are used to produce fumes, smoke, and/or vapor from the burning of material including, but not limited to, tobacco, shisha, or other plant matter.