Top coat definition

Top coat means the final film or series of films or coatings applied in a two coat (or more) operation.
Sample 1Sample 2Sample 3
Top coat means the final film of coating applied to a two-coat operation.
Sample 1Sample 2Sample 3
Top coat means the coating applied to a surface for the purpose of establishing color and surface appearance which includes both base coat and clear coat in base coat/clear coat operations.
Sample 1

Examples of Top coat in a sentence

  • Top coat is a polyester based structured wear resistant clear powder coat of 2.5-3.5 mils cured film thickness.

  • Top coat with two coats Yellow Carboline 139, unless guard post cover or sleeve is to be installed.

  • Top coat of Super Durable TGIC powder coat shall be applied over the epoxy primer.

  • Figure: left - 1 Primer, 2 Thermal insulation, 3 Anchor, 4 Base coat, 5 Reinforcement mesh, 6 Primer, 7 Top coat; right - crack examplesBasic function of Base coat is to bear stresses due to thermal expansions and possible impacts (e.g. hail, ball...).

  • The Application of Top coat has to be either in single layer or double layer @ 3.5kg per sqm to give overall thickness of the self leveling Antistatic screed as 3mm.

  • Top coat painting The top coat painting for the tank, fans and radiators shall be performed using paints belonging to one of the following categories.

  • Top coat of #911 Eternalastic shall not be applied unless the base coat is clean and dry to provide proper adhesion.

  • Deviations from specification *DELETE WHICH IS NOT APPLICABLE Technical Schedule for Corrosion Protection Qualifications of Corrosion ProtectionApplicator List of equipment and instrumentation Coating system:Type of paint offered (no primers)Coat/StageProductCodeColourAppend Technical literature Top coat Pickling pasteSurface prep.

  • Top coat applications where granules are added can be applied at 1.5 gallons per 100 sq.

  • Top coat is used as a finish coat over areas that have been previously coated with either base coat or reinforcement coat.

Related to Top coat

  • Topcoat means a coating that is applied over a primer on an aerospace vehicle or component for appearance, identification, camouflage, or protection. Topcoats that are defined as specialty coatings are not included under this definition.

  • Touch-up coating means a coating used to cover minor coating imperfections appearing after the main coating operation.

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.

  • Clear coating means a transparent coating designed to provide the final gloss and resistance properties of the coating system;

  • Single coat means one film coating applied to a metal surface.

  • Basecoat means a coat of colored material, usually opaque, that is applied before graining inks, glazing coats, or other opaque finishing materials and is usually topcoated for protection.

  • Dip coating means the application of a coating material to a substrate by dipping the part into a tank of the coating material.

  • Brands means the Sprint PCS Brands and the Sprint Brands.

  • Nuclear coating means any protective coating used to seal porous surfaces such as steel (or concrete) that otherwise would be subject to intrusion by radioactive materials. These coatings must be resistant to long-term (service life) cumulative radiation exposure (ASTM D4082-89), relatively easy to decontaminate (ASTM D4256-89(1994)e1), and resistant to various chemicals to which the coatings are likely to be exposed (ASTM D3912-80). [For nuclear coatings, see the general protective requirements outlined by the United States nuclear regulatory commission in a report entitled "Regulatory Guide 1.54 - Service Level I, II and III Protective Coatings Applied to Nuclear Plants"

  • Latrobe means Latrobe Health Services Inc. ABN 95 159 348 533 (otherwise referred to in these rules as “Latrobe” or “the fund”).

  • First Storey means that part of a building having a floor area closest to grade with a ceiling height of more than 1.8 metres (6 ft.) above grade.

  • Forest means an area of land defined by the minimum values for area size, tree crown cover or an equivalent stocking level, and potential tree height at maturity at the place of growth of the trees as specified for each Member State in Annex II. It includes areas with trees, including groups of growing, young, natural trees, or plantations that have yet to reach the minimum values for tree crown cover or an equivalent stocking level or minimum tree height as specified in Annex II, including any area that normally forms part of the forest area but on which there are temporarily no trees as a result of human intervention, such as harvesting, or as a result of natural causes, but which area can be expected to revert to forest;

  • Community Contribution Company means a corporation formed under the laws of British Columbia that includes in its articles the following statement:

  • Rock means the body of consolidated or partially consolidated material composed of minerals at or below the land surface. Rock includes bedrock and partially weathered rock that is hard and cannot be dug with hand tools. The upper boundary of rock is "saprolite," "soil," or the land surface.

  • Specialty coating means a coating that, even though the coating meets the definition of a primer, topcoat, or self-priming topcoat, has additional performance criteria beyond those of primers, topcoats, and self-priming topcoats for specific applications. These performance criteria may include, but are not limited to, temperature or fire resistance, substrate compatibility, antireflection, temporary protection or marking, sealing, adhesively joining substrates, or enhanced corrosion protection. A listing of specialty coatings is found in paragraph (D)(1)(b) of rule 3745-21-19 of the Administrative Code.

  • Spirits means any beverage which contains alcohol obtained by distillation mixed with drinkable water and other substances in solution, including, but not limited to, brandy, rum, whisky, and gin.

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Tree means any object of natural growth.

  • Service Road means a road or lane provided at the front, rear or side of a plot for service purpose;

  • Edge of any water means the outer edge of the water's bankfull width or, where applicable, the outer edge of the associated channel migration zone.