Umpire Sample definition

Umpire Sample means a sample to provide a basis for settling disputes between the Buyer and the Seller.
Sample 1Sample 2Sample 3
Umpire Sample means a sample to provide a basis for settling disputes between the Buyer and the Seller. “US$” shall refer to the lawful currency of the United States of America.
Sample 1Sample 2
Umpire Sample has the meaning given in clause 12.4.1;
Sample 1

Examples of Umpire Sample in a sentence

  • The sample shall be divided into four parts, one each for the Supplier and the Purchaser, one for the Analysis and one for Umpire Sample.

  • However, only in case of testing of Umpire Sample in an outside lab, if the Umpire sample fails, the supplier shall bear the expenses of the umpire sample testing.

  • In the event the request for analysis of Umpire Sample is made by the Buyer and the Umpire Analysis Certificate indicates that the results is not within the tolerances allowed by the Standard and the result of the Umpire sample Analysis Certificate shall become the Binding Result as per Clause 3.5.3 above, the Seller shall reimburse the cost of analysis of umpire Sample to the Buyer.

  • In such circumstances, the Umpire Sample shall be submitted to the Umpire Laboratory for analysis within two (2) days of the written notice challenging the analysis result.

  • Each representative sublots and composite sample (4.75 mm) shall be divided into three parts: one set being the shipment analysis sample (the "Shipment Sample"), and the second set being the Buyer‟s Sample (the “Buyer‟s Sample”) and the third set being the Umpire sample (the "Umpire Sample").

  • In case the Supplier disputes with the Test results of VSP laboratory, re-testing will be limited to chemical analysis of Umpire Sample only.

  • If any Analysis Certificate is so challenged, the challenging Party shall procure that the Umpire Laboratory shall perform an analysis of the relevant characteristic(s) and issue to Buyer and Seller a certificate certifying the results of such analysis within five (5) Business Days of submitting the Umpire Sample for analysis (the “Umpire Certificate”).

  • Third part shall be jointly sealed and signed by theXIIIQuality Certificationauthorized representative of DPL and the Seller, if present and to be kept by DPL for a period of 60 Days ( from the date of issue of analysis report to the Seller by DPL) as Umpire Sample.

  • The Umpire sample to be preserved in good air tight sealed condition for dispatch to umpire laboratory even after 90 days, if the intimation from either party is provided within 90 days from BL date In such event the Umpire Sample (Either loadport or discharge port) shall be sent to mutually acceptable internationally recognized independent commercial laboratory (the “Umpire Laboratory”).

  • In case the Supplier disputes with the Test results of VSP laboratory, re -testi ng will be limited to chemical analysis of Umpire Sample only.


More Definitions of Umpire Sample

Umpire Sample has the meaning set forth in Clause 4.2.
Sample 1

Related to Umpire Sample

  • DNA sample means any material that has come from a human body and consists of or includes human cells;

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • Bid sample means a sample to be furnished by a bidder to show the characteristics of the item offered in the bid.

  • Drug sample means a unit of a prescription drug that is not intended to be sold and is intended to promote the sale of the drug.

  • Dual sample set means a set of two samples collected at the same time and same location, with one sample analyzed for TTHM and the other sample analyzed for HAA5.

  • Representative sample means a sample of a universe or whole (e.g., waste pile, lagoon, ground water) which can be expected to exhibit the average properties of the universe or whole.

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Composite sample means a combination of individual samples of wastewater taken at 1 hour intervals, for eight (8) hours (or for the duration of discharge, whichever is less), to minimize the effect of variability of the individual samples. Individual samples must be of equal volume. (Example: one (1) liter per hour.)

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Industry representative sample means liquor that is placed in the possession of the department for testing, analysis, and sampling by a local industry representative on the premises of the department to educate the local industry representative of the quality and characteristics of the product.

  • Non-Retail Behind The Meter Generation means Behind the Meter Generation that is used by municipal electric systems, electric cooperatives, or electric distribution companies to serve load.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Assay means a laboratory analysis of Crude Petroleum to include the following: A.P.I. Gravity, Reid vapor pressure, composition, pour point, water and sediment content, sulfur content, viscosity, distillation, hydrogen sulfide, flash/boiling point and other characteristics as may be required by Carrier.

  • Department sample means liquor that is placed in the possession of the

  • Aerosol coating product means a pressurized coating product containing pigments or resins that dispenses product ingredients by means of a propellant, and is packaged in a disposable can for hand-held application, or for use in specialized equipment for ground traffic/marking applications.

  • Spray buff product means a product designed to restore a worn floor finish in conjunction with a floor buffing machine and special pad.

  • API means the American Petroleum Institute.

  • Samples mean representative physical examples of materials, equipment or workmanship, used to confirm compliance with requirements and/or to establish standards for use in execution of the Work.

  • Alternative nicotine product means any noncombustible product containing nicotine that is intended for human consumption, whether chewed, absorbed, dissolved, or ingested by any other means. "Alternative nicotine product" does not include any nicotine vapor product, tobacco product, or product regulated as a drug or device by the U.S. Food and Drug Administration (FDA) under Chapter V (21

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Sample means urine, blood, breath, saliva, or hair.

  • Quarterly (1/Quarter) sampling frequency means the sampling shall be done in the months of March, June, August, and December, unless specifically identified otherwise in the Effluent Limitations and Monitoring Requirements table.

  • Bottle means any vessel intended to contain liquids and having a capacity of not more than 43

  • alternate aerodrome means an aerodrome to which an aircraft may proceed when it becomes either impossible or inadvisable to proceed to or to land at the aerodrome of intended landing, where the necessary services and facilities are available, where aircraft performance requirements can be met and which is operational at the expected time of use. Alternate aerodromes include the following:

  • Behind The Meter Generation shall refer to a generation unit that delivers energy to load without using the Transmission System or any distribution facilities (unless the entity that owns or leases the distribution facilities has consented to such use of the distribution facilities and such consent has been demonstrated to the satisfaction of the Office of the Interconnection); provided, however, that Behind The Meter Generation does not include (i) at any time, any portion of such generating unit’s capacity that is designated as a Generation Capacity Resource; or (ii) in an hour, any portion of the output of such generating unit that is sold to another entity for consumption at another electrical location or into the PJM Interchange Energy Market.

  • Pre-commissioning means the testing, checking, and any other required activity that may be specified in the Technical Requirements that are to be carried out by the Supplier in preparation for Commissioning of the System as provided in GCC Clause 26 (Installation).