Uninstructed Deviation definition

Uninstructed Deviation has the meaning set forth in the CAISO Tariff.
Sample 1Sample 2Sample 3
Uninstructed Deviation means a deviation from the resources’ Dispatch Operating Point.
Sample 1

Examples of Uninstructed Deviation in a sentence

  • The SDD Administrative Charge is calculated as follows: If A > (B + C) or A < (B – C), then: SDD Administrative Charge = (Absolute Value (B – A) – C) x Uninstructed Deviation GMC Rate.

  • If such defined performance band is exceeded by any amount in more than five percent (5%) of the ten-minute intervals on three successive days, then such deviations shall constitute one event of non-compliance with the CAISO Dynamic Scheduling Protocol pursuant to Section 3.2.2. Deviations from Dynamic Schedules of Energy will also be subject to Uninstructed Deviation Penalties pursuant to Section 11.23 and related provisions of the CAISO Tariff.

  • Deviations from Dynamic Schedules of Energy will be subject to Uninstructed Deviation Penalties pursuant to Section 11.23 and related provisions of the CAISO Tariff.

  • Deviations from Dynamic Schedules of Energy will also be subject to Uninstructed Deviation Penalties pursuant to Section 11.23 and related provisions of the CAISO Tariff.

  • If such defined performance band is exceeded by any amount in more than five percent (5%) of the ten-minute intervals on three successive days, then such deviations shall constitute one event of non- compliance with the ISO’s Standards pursuant to Section 3.2.2. Deviations from dynamic Energy schedules will also be subject to Uninstructed Deviation Penalties pursuant to Section 11.2.4.1.2 and related provisions of the ISO Tariff.

  • During the Delivery Term, Seller shall be liable for any costs, charges, or penalties assessed by the CAISO to Buyer related to the inability of the Unit(s) to provide or dispatch any scheduled or awarded Other Products as available to Buyer in Appendix II, due to Uninstructed Deviation or a Forced Outage event (an “Other Products Charge”), except to the extent any such obligations or liabilities arise solely as a result of any act or omission of Buyer in its role as Scheduling Coordinator.

  • Notwithstanding anything contained herein to the contrary, Seller shall be responsible for all CAISO charges or payments incurred as a consequence of the Project not being available, Seller failing to notifying Buyer of outages in a timely manner as set forth in Article 17, or deviations from Scheduled Energy that are attributable to the operation of the Project, including, but not limited to Uninstructed Imbalance Energy charges, Uninstructed Deviation Penalties and Ancillary Services No-Pay.

  • If such defined performance band is exceeded by any amount in more than five percent (5%) of the ten-minute intervals on three successive days, then such deviations shall constitute one event of non- compliance with the ISO Dynamic Scheduling Protocol pursuant to Section 3.2.2. Deviations from dynamic Energy schedules will also be subject to Uninstructed Deviation Penalties pursuant to Section 11.2.4.1.2 and related provisions of the ISO Tariff.

  • If such defined performance band is exceeded by any amount in more than five percent (5%) of the ten-minute intervals on three successive days, then such deviations shall constitute one event of non-compliance with the CAISO’s Standards pursuant to Section 3.2.2. Deviations from dynamic Energy schedules will also be subject to Uninstructed Deviation Penalties pursuant to Section 11.23 and related provisions of the CAISO Tariff.

  • Seller shall be responsible for all CAISO charges or payments (in each case, net of Buyer’s fuel costs or avoided fuel costs) incurred as a consequence of the Project not being available, the Seller not notifying Buyer of outages in a timely manner (as set forth in Section 20.3), or deviations from Scheduled Energy that are attributable to the operation of the Project, including, but not limited to Uninstructed Imbalance Energy charges, Uninstructed Deviation Penalties and Ancillary Services No-Pay.

Related to Uninstructed Deviation

  • Deviation is a departure from the requirements specified in the tendering document;

  • Excess Concentration means the sum of the following amounts, without duplication:

  • Nonconformity or “Nonconformities” means any failure or failures of the Software to conform to the requirements of this Contract, including any applicable Documentation.

  • Swap Specification means, with respect to any Swap, the Rules or other trading protocols containing specifications for such Swap, as adopted, amended, supplemented or otherwise modified from time to time by BSEF.

  • Nonconforming structure means a structure the size, dimension or location of which was lawful prior to the adoption, revision or amendment of a zoning ordinance, but which fails to conform to the requirements of the zoning district in which it is located by reasons of such adoption, revision or amendment.

  • In-stream Waste Concentration or "(IWC)" means the concentration of a discharge in the receiving water after mixing has occurred in the allocated zone of influence.

  • Alcohol concentration means the number of grams of alcohol per:

  • Nonconformance as used in this clause means a condition of any hardware, software, material, or service/workmanship in which one or more characteristics do not conform to requirements.

  • Materials of Environmental Concern any gasoline or petroleum (including crude oil or any fraction thereof) or petroleum products or any hazardous or toxic substances, materials or wastes, defined or regulated as such in or under any Environmental Law, including asbestos, polychlorinated biphenyls and urea-formaldehyde insulation.

  • Material of Environmental Concern means and includes pollutants, contaminants, hazardous wastes, and toxic, radioactive, caustic or otherwise hazardous substances, including petroleum, its derivatives, by-products and other hydrocarbons, or any substance having any constituent elements displaying any of the foregoing characteristics.

  • Goods Specification means any specification for the Goods, including any related plans and drawings, as set out in the Order or otherwise agreed in writing by Get Living and the Supplier;

  • Product Specification means a product specification for a Medical Device set out in Schedule 2;

  • Abnormal Condition means any condition on the Interconnection Facilities which, determined in accordance with Good Utility Practice, is: (i) outside normal operating parameters such that facilities are operating outside their normal ratings or that reasonable operating limits have been exceeded; and (ii) could reasonably be expected to materially and adversely affect the safe and reliable operation of the Interconnection Facilities; but which, in any case, could reasonably be expected to result in an Emergency Condition. Any condition or situation that results from lack of sufficient generating capacity to meet load requirements or that results solely from economic conditions shall not, standing alone, constitute an Abnormal Condition.

  • Nonconforming sign means a sign or sign structure, other than a nonstandard sign or a sign that is erected and maintained in a business area along a scenic byway prior to the designation as a scenic byway, that satisfies 1 of the following:

  • TENDER SPECIFICATION means “Specific conditions, technical specifications, appendices, site information and drawing pertaining to the work in which the tenderers are required to submit their offer. Individual specification number will be assigned to each tender specification.

  • Net concentration means the difference between the concentration of a given substance in a sample taken of the discharge and the concentration of the same substances in a sample taken at the intake which supplies water to the given process. For the purpose of this definition, samples that are taken to determine the net concentration shall always be 24-hour composite samples made up of at least six increments taken at regular intervals throughout the plant day.

  • Class specification means a written description of a class setting forth factors and conditions which are essential characteristics of positions in that class.

  • Functional Specifications means the descriptions of features and functions of the Application as expressly set forth in Quote.

  • Transboundary movement means any movement of hazardous wastes or other wastes from an area under the national jurisdiction of one State to or through an area under the national jurisdiction of another State or to or through an area not under the national jurisdiction of any State, provided at least two States are involved in the movement;

  • Critical Test Concentration or "(CTC)" means the specified effluent dilution at which the Permittee is to conduct a single-concentration Aquatic Toxicity Test.

  • Recyclable material means a material generated by the entity's operations, including aluminum, steel containers, aseptic packag- ing and polycoated paperboard cartons, high-grade office paper, and corrugated cardboard.

  • Certificate of Analysis means a document signed by an authorized representative of Manufacturer, describing Specifications for, and testing methods applied to, Product, and the results of testing.

  • Concentration means the weight of any given material present in a unit volume of liquid. Unless otherwise indicated in this permit, concentration values shall be expressed in milligrams per liter (mg/l).

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Adulterated Specimen means a specimen that contains a substance that is not expected to be present in oral fluid, or contains a substance expected to be present but is at a concentration so high that it is not consistent with oral fluid.

  • Product Specifications means the specifications, features and/or terms of any "Contract" (as defined in the LME Rules) listed for trading on the LME, as described in the LME Rules;