User Setup definition

User Setup means the function through which the Primary User may add, edit, or delete eTreasury+ Users to allow access to all or some of the accounts and services included in your company’s eTreasury+ Company ID. “Username or User ID” means a string of numbers and/or characters that is either defined by a User or is provided to you by People’s United Bank, which is used to validate User access to eTreasury+.
Sample 1
User Setup. This section lists the Person Group and Login ID of the end-user that will be used during the execution of the test script.  Data Setup: This section indicates the data that will need to be set up or available prior to starting the execution of the test script.  Test Steps: This section documents the line by line steps of the test script. These steps shall be performed as defined in the procedure and in step order. Additional columns will indicate the expected result. Testers will document if the step Passed or Failed and any Notes.
Sample 1

Examples of User Setup in a sentence

  • See the GX-2009 User Setup Program Operator’s Manual for a description of the Cal Limit Display and Cal Limit Check instrument parameters.• When Cal Limit Display is set to On and Cal.

  • First-time AWS User Setup: You can skip this if you already have an AWS account/payment method set up.

  • See the 03 Series User Setup Program Operator’s Manual for a description of the Cal.

  • The Account User Setup and Purchase Card Approval in Access Online course is in the process of being included as an AgLearn training module.

  • Account User Setup and Purchase Card Approval in Access Online User Guide details the training requirements and the process for handling purchase card account requests.

  • The only method of accessing previous screens is to enter the User Setup again and move through all the parameters.

  • This guide is located on the CCSC website and can be found in the Account User Setup and Purchase Card Approval in Access Online User Guide.

  • Continuous Learning Points for Access Online WBTType of Training Account User Setup and Purchase Card Approval in Access Online‌In addition to the US Bank training and AgLearn training modules, APCs and LAPCs must also be familiar with the necessary procedures to setup a new purchase card account request and for APCs to final approve a purchase card account request in Access Online.

  • Press and hold SCAN and ENTER for three (3) seconds to enter User Setup.

  • The only method of accessingprevious screens is to enter the User Setup again and move through all the parameters.

Related to User Setup

  • End User Customer means a third party retail Customer that subscribes to a Telecommunications Service provided by either of the Parties or by another Carrier or by two (2) or more Carriers.

  • Access Tandem Switch is a Switch used to connect End Office Switches to interexchange Carrier Switches. Qwest's Access Tandem Switches are also used to connect and switch traffic between and among Central Office Switches within the same LATA and may be used for the exchange of local traffic.

  • IntraLATA LEC Toll means IntraLATA Toll traffic carried solely by a Local Exchange Carrier and not by an IXC. "IntraLATA Toll Traffic" describes IntraLATA Traffic outside the Local Calling Area.

  • User Interface means the interface for the Hosted Services designed to allow individual human users to access and use the Hosted Services.

  • Wastewater treatment system means any equipment, plants,

  • Wireless support structure means a freestanding structure designed to support or capable of supporting small cell wireless facilities. Wireless support structure does not include a utility pole.

  • Customer-generator means a user of a net metering system.

  • Network Data Mover (NDM) or “Connect Direct” means the industry standard protocol for transferring information electrically.

  • Switched Access Detail Usage Data means a category 1101xx record as defined in the EMI iconectiv Practice BR 010-200-010.

  • User Interface(s means any technologies thatiii. Customer owns and/or for which Customer has secured an appropriate license/subscription and is/areiv. used to develop/manage user interaction features and characteristics for ERP. Solely for clarity regarding ERP licensing requirements under a contract, User Interfaces for ERP shall be deemed part of ERP and therefore require human users Using ERP via such User Interfaces to have a “Named User” and/or “User” license for ERP, as applicable.

  • END USER CUSTOMER LOCATION means the physical location of the premises where an End User makes use of the telecommunications services.

  • IVR means Interactive Voice Response.

  • Radio frequency identification (RFID means an automatic identification and data capture technology comprising one or more reader/interrogators and one or more radio frequency transponders in which data transfer is achieved by means of suitably modulated inductive or radiating electromagnetic carriers.

  • SPID is the number that identifies a service provider to the relevant NPAC. The SPID may be a state-specific number. "Serving Wire Center" denotes the CenturyLink building from which dial tone for local Exchange Service would normally be provided to a particular End User Customer premises. "Signaling System 7" or "SS7" is an out-of-band signaling protocol consisting of four basic sub- protocols:

  • Distribution Network means a 'distribution network' as defined in Special Condition E2A of the Transporter's Licence held by each DN Operator;

  • Centralized Message Distribution System (CMDS) means the transport system that LECs use to exchange outcollect and Carrier Access Billing System “CABS” access messages among each other and other Parties connected to CMDS.

  • Network Customer means an entity receiving transmission service pursuant to the terms of the Transmission Provider’s Network Integration Transmission Service under Tariff, Part III. Network External Designated Transmission Service:

  • Packet Switch is a router designed to read the destination address in an incoming cell or packet, consult a routing table and route the packet toward its destination. Packetizing is done in originating CPE and reassembly is done in terminating CPE. Multiple packet formats or protocols exist (e.g., x.25, x.75, frame relay, ATM, and IP).

  • Redistribution Software means the software described in Paragraph 4 (“Use of Redistribution Software”) below.

  • Centralized Message Distribution System (CMDS) means the industry-wide data collection system, which handles the daily exchange of message details between CMDS participating telephone companies (also known as CMDS Direct Participants). AT&T-21STATE is a CMDS Direct Participant.

  • Wastewater treatment plant means a facility designed and constructed to receive, treat, or store waterborne or liquid wastes.

  • Wastewater treatment tank means a tank that is designed to receive and treat an influent wastewater through physical, chemical, or biological methods.

  • Customer System means the Customer's computing environment (consisting of hardware, software and/or telecommunications networks or equipment) used by the Customer or the Supplier in connection with this Contract which is owned by or licensed to the Customer by a third party and which interfaces with the Supplier System or which is necessary for the Customer to receive the Services;

  • Wastewater Treatment Works means an arrangement of devices and structures for treating wastewater, industrial wastes, and sludge. Sometimes used as synonymous with "waste treatment plant" or "wastewater treatment plant" or "pollution control plant".

  • Network Load means the load that a Network Customer designates for Network Integration Transmission Service under Tariff, Part III. The Network Customer’s Network Load shall include all load (including losses) served by the output of any Network Resources designated by the Network Customer. A Network Customer may elect to designate less than its total load as Network Load but may not designate only part of the load at a discrete Point of Delivery. Where an Eligible Customer has elected not to designate a particular load at discrete points of delivery as Network Load, the Eligible Customer is responsible for making separate arrangements under Tariff, Part II for any Point-To-Point Transmission Service that may be necessary for such non-designated load.

  • Switch means a switching device employed by a Carrier within the Public Switched Network. Switch includes but is not limited to End Office Switches, Tandem Switches, Access Tandem Switches, Remote Switching Modules, and Packet Switches. Switches may be employed as a combination of End Office/Tandem Switches. "Switched Access Service" means the offering of transmission and switching services to Interexchange Carriers for the purpose of the origination or termination of telephone toll service. Switched Access Services include: Feature Group A, Feature Group B, Feature Group D, 8XX access, and 900 access and their successors or similar Switched Access Services. "Switched Access Traffic" is traffic that originates at one of the Party's End User Customers and terminates at an IXC Point of Presence, or originates at an IXC Point of Presence and terminates at one of the Party's End User Customers, whether or not the traffic transits the other Party's network.