Common use of Participation requirements Clause in Contracts

Participation requirements. To be admitted to the selection, the following requirements must be held: - Master Degree in Mechanical Engineering; - Master Degree in Management Engineering Interministerial Decree 9.7.2009 on the equivalency between Lauree (equivalent to Bachelors of Science) under the old educational system, specialist ▇▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇ (equivalent to Masters of Science) is available at the following link: ▇▇▇▇://▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇▇/▇▇▇▇.▇▇▇ The Interministerial Decrees that ratify the equivalency between Italian academic qualifications for the purposes of participating in public are available at the following link: ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇/▇▇▇/▇▇▇▇▇▇▇▇▇▇/▇▇▇▇▇▇▇▇▇▇▇▇-▇▇▇▇▇▇.▇▇▇▇ The following will also constitute assessable qualifications: Manufacturing processes, Production systems, Optimization methods The requirements, qualifications, experience and expertise must strictly be declared on the application for participation rendered in accordance with Articles 46 and 47 of Italian Presidential Decree 445/2000 and held at the deadline for submitting the application for admission to the selection. Those who have a familial or kinship relationship, up to the 4th degree inclusive, with a professor of the Department of Mechanical Engineering, with the Rector, with the Director General or with a member of the Board of Governors may not participate in the selection procedure, in accordance with the provisions of Art. 18 paragraph 1 letter c) of Italian Law 240/2010. If the qualification(s) indicated above was/were obtained abroad, it/they must be (an) official qualification(s) of the foreign university system, issued by an institution officially recognized in the relevant foreign system and it/they must be equivalent, for the sole purposes of the selection, by nature, level and disciplinary correspondence, to the respective Italian qualification indicated above.

Participation requirements. To be admitted to the selection, the The following requirements must be heldmet for admission to the selection: - Master Degree in Mechanical Engineering; - Master Degree in Management Engineering Interministerial Decree 9.7.2009 on the equivalency between Lauree Laurea Magistrale (equivalent to Bachelors Master of Science) in LM-4 - Architecture and Architectural engineering equated and equivalent ex lege to the degrees under the old educational system; Italian Interministerial Decree of 9 July 2009 on the equivalence between old educational system degrees, specialist ▇▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇ degrees and Laurea Magistrale (equivalent to Masters Master of Science) degrees is available at the following link: ▇▇▇▇://▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇▇/▇▇▇▇.▇▇▇ The Interministerial Decrees that ratify the equivalency Decree establishing equivalences between Italian academic qualifications for the purposes of participating participation in public competitions are available at the following link: ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇/▇▇▇/▇▇▇▇▇▇▇▇▇▇/▇▇▇▇▇▇▇▇▇▇▇▇-▇▇▇▇▇▇.▇▇▇▇ The following will also constitute assessable qualifications: Manufacturing processes, Production systems, Optimization methods The requirementsRequirements, qualifications, experience and expertise knowledge must be strictly be declared on the application for participation rendered in accordance with form submitted pursuant to Articles 46 and 47 of Italian Presidential Decree No 445/2000 and held at possessed by the deadline for submitting the application for admission to the selection. Those who have a familial relationship of kinship or kinship relationshipaffinity, up to the 4th degree inclusive, with a professor of from the Department of Mechanical Architecture, Built Environment and Construction Engineering, with the Rector, with the Director Director- General or with a member of the Board of Governors Governors, in accordance with the provisions of Article 18, paragraph 1, letter c) of Italian Law No 240/2010, may not participate in the selection procedure, in accordance with . In the provisions of Art. 18 paragraph 1 letter c) of Italian Law 240/2010. If event that the above qualification(s) indicated above was/were obtained abroad, it/they must be (an) an official qualification(s) of the foreign university system, issued by an institution officially recognized recognised in the relevant foreign reference system and it/they must be equivalent, for the sole selection purposes of the selectiononly, by in nature, level and disciplinary correspondence, to the respective Italian qualification indicated above.

Participation requirements. To be admitted to the selection, the The following requirements must be heldmet for admission to the selection: - Master Degree in Mechanical Engineering; - Master Degree in Management Engineering Interministerial Decree 9.7.2009 on the equivalency between Lauree Laurea Magistrale (equivalent to Bachelors Master of Science) in LM-31 - Management engineering equated and equivalent ex lege to the degrees under the old educational system; Italian Interministerial Decree of 9 July 2009 on the equivalence between old educational system degrees, specialist ▇▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇ degrees and Laurea Magistrale (equivalent to Masters Master of Science) degrees is available at the following link: ▇▇▇▇://▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇▇/▇▇▇▇.▇▇▇ The Interministerial Decrees that ratify the equivalency Decree establishing equivalences between Italian academic qualifications for the purposes of participating participation in public competitions are available at the following link: ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇/▇▇▇/▇▇▇▇▇▇▇▇▇▇/▇▇▇▇▇▇▇▇▇▇▇▇-▇▇▇▇▇▇.▇▇▇▇ The following will also constitute assessable qualifications: Manufacturing processes, Production systems, Optimization methods The requirementsKnowledge on the realization of virtual models Requirements, qualifications, experience and expertise knowledge must be strictly be declared on the application for participation rendered in accordance with form submitted pursuant to Articles 46 and 47 of Italian Presidential Decree No 445/2000 and held at possessed by the deadline for submitting the application for admission to the selection. Those who have a familial relationship of kinship or kinship relationshipaffinity, up to the 4th degree inclusive, with a professor of from the Department of Mechanical Engineering, with the Rector, with the Director Director-General or with a member of the Board of Governors Governors, in accordance with the provisions of Article 18, paragraph 1, letter c) of Italian Law No 240/2010, may not participate in the selection procedure, in accordance with . In the provisions of Art. 18 paragraph 1 letter c) of Italian Law 240/2010. If event that the above qualification(s) indicated above was/were obtained abroad, it/they must be (an) an official qualification(s) of the foreign university system, issued by an institution officially recognized recognised in the relevant foreign reference system and it/they must be equivalent, for the sole selection purposes of the selectiononly, by in nature, level and disciplinary correspondence, to the respective Italian qualification indicated above.

Participation requirements. To be admitted to the selection, the The following requirements must be heldmet for admission to the selection: - Master Degree in Mechanical Engineering; - Master Degree in Management Engineering PhD (all degree classes) Italian Interministerial Decree 9.7.2009 of 9 July 2009 on the equivalency equivalence between Lauree old educational system degrees, specialist degrees and Laurea Magistrale (equivalent to Bachelors Master of Science) under the old educational system, specialist ▇▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇ (equivalent to Masters of Science) degrees is available at the following link: ▇▇▇▇://▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇▇/▇▇▇▇.▇▇▇ The Interministerial Decrees that ratify the equivalency Decree establishing equivalences between Italian academic qualifications for the purposes of participating participation in public competitions are available at the following link: ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇/▇▇▇/▇▇▇▇▇▇▇▇▇▇/▇▇▇▇▇▇▇▇▇▇▇▇-▇▇▇▇▇▇.▇▇▇▇ The following will also constitute assessable qualifications: Manufacturing processes, Production systems, Optimization methods The requirementsExperience in qualitative and quantitative social research on housing policies; Experience in writing research reports; Experience in international-level research. Requirements, qualifications, experience and expertise knowledge must be strictly be declared on the application for participation rendered in accordance with form submitted pursuant to Articles 46 and 47 of Italian Presidential Decree No 445/2000 and held at possessed by the deadline for submitting the application for admission to the selection. Those who have a familial relationship of kinship or kinship relationshipaffinity, up to the 4th degree inclusive, with a professor of from the Department of Mechanical EngineeringArchitecture and Urban Studies, with the Rector, with the Director Director-General or with a member of the Board of Governors Governors, in accordance with the provisions of Article 18, paragraph 1, letter c) of Italian Law No 240/2010, may not participate in the selection procedure, in accordance with . In the provisions of Art. 18 paragraph 1 letter c) of Italian Law 240/2010. If event that the above qualification(s) indicated above was/were obtained abroad, it/they must be (an) an official qualification(s) of the foreign university system, issued by an institution officially recognized recognised in the relevant foreign reference system and it/they must be equivalent, for the sole selection purposes of the selectiononly, by in nature, level and disciplinary correspondence, to the respective Italian qualification indicated above.

Participation requirements. To be admitted to the selection, the The following requirements must be heldmet for admission to the selection: - Master Degree in Mechanical Engineering; - Master Degree in Management Engineering Interministerial Decree 9.7.2009 on the equivalency between Lauree Laurea Magistrale (equivalent to Bachelors Master of Science) in LM-32 - Computer systems engineering or LM-35 - Environmental engineering equated and equivalent ex lege to the degrees under the old educational system; Italian Interministerial Decree of 9 July 2009 on the equivalence between old educational system degrees, specialist ▇▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇ degrees and Laurea Magistrale (equivalent to Masters Master of Science) degrees is available at the following link: ▇▇▇▇://▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇▇/▇▇▇▇.▇▇▇ The Interministerial Decrees that ratify the equivalency Decree establishing equivalences between Italian academic qualifications for the purposes of participating participation in public competitions are available at the following link: ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇/▇▇▇/▇▇▇▇▇▇▇▇▇▇/▇▇▇▇▇▇▇▇▇▇▇▇-▇▇▇▇▇▇.▇▇▇▇ The following will also constitute assessable qualifications: Manufacturing processesKnowledge (curricular exams, Production systemsdissertations, Optimization methods The requirementsprojects) in the area of Geographical Information Systems and Geomatics in general. Requirements, qualifications, experience and expertise knowledge must be strictly be declared on the application for participation rendered in accordance with form submitted pursuant to Articles 46 and 47 of Italian Presidential Decree No 445/2000 and held at possessed by the deadline for submitting the application for admission to the selection. Those who have a familial relationship of kinship or kinship relationshipaffinity, up to the 4th degree inclusive, with a professor of from the Department of Mechanical Civil and Environmental Engineering, with the Rector, with the Director Director-General or with a member of the Board of Governors Governors, in accordance with the provisions of Article 18, paragraph 1, letter c) of Italian Law No 240/2010, may not participate in the selection procedure, in accordance with . In the provisions of Art. 18 paragraph 1 letter c) of Italian Law 240/2010. If event that the above qualification(s) indicated above was/were obtained abroad, it/they must be (an) an official qualification(s) of the foreign university system, issued by an institution officially recognized recognised in the relevant foreign reference system and it/they must be equivalent, for the sole selection purposes of the selectiononly, by in nature, level and disciplinary correspondence, to the respective Italian qualification indicated above.

Participation requirements. To be admitted to the selection, the The following requirements must be heldmet for admission to the selection: - Master Degree in Mechanical Engineering; - Master Degree in Management Engineering Interministerial Decree 9.7.2009 on the equivalency between Lauree Laurea Magistrale (equivalent to Bachelors Master of Science) in LM-4 - Architecture and Architectural engineering equated and equivalent ex lege to the degrees under the old educational system; Italian Interministerial Decree of 9 July 2009 on the equivalence between old educational system degrees, specialist ▇▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇ degrees and Laurea Magistrale (equivalent to Masters Master of Science) degrees is available at the following link: ▇▇▇▇://▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇▇/▇▇▇▇.▇▇▇ The Interministerial Decrees that ratify the equivalency Decree establishing equivalences between Italian academic qualifications for the purposes of participating participation in public competitions are available at the following link: ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇/▇▇▇/▇▇▇▇▇▇▇▇▇▇/▇▇▇▇▇▇▇▇▇▇▇▇-▇▇▇▇▇▇.▇▇▇▇ The following will also constitute assessable qualifications: Manufacturing processes, Production systems, Optimization methods The requirementsRequirements, qualifications, experience and expertise knowledge must be strictly be declared on the application for participation rendered in accordance with form submitted pursuant to Articles 46 and 47 of Italian Presidential Decree No 445/2000 and held at possessed by the deadline for submitting the application for admission to the selection. Those who have a familial relationship of kinship or kinship relationshipaffinity, up to the 4th degree inclusive, with a professor of from the Department of Mechanical EngineeringMantova Campus, with the Rector, with the Director Director-General or with a member of the Board of Governors Governors, in accordance with the provisions of Article 18, paragraph 1, letter c) of Italian Law No 240/2010, may not participate in the selection procedure, in accordance with . In the provisions of Art. 18 paragraph 1 letter c) of Italian Law 240/2010. If event that the above qualification(s) indicated above was/were obtained abroad, it/they must be (an) an official qualification(s) of the foreign university system, issued by an institution officially recognized recognised in the relevant foreign reference system and it/they must be equivalent, for the sole selection purposes of the selectiononly, by in nature, level and disciplinary correspondence, to the respective Italian qualification indicated above.

Participation requirements. To be admitted to the selection, the The following requirements must be heldmet for admission to the selection: - Master Degree in Mechanical Engineering; - Master Degree in Management Engineering Interministerial Decree 9.7.2009 on the equivalency between Lauree Laurea Magistrale (equivalent to Bachelors Master of Science) in LM-30 - Energy and nuclear engineering or LM-31 - Management engineering or LM-33 - Mechanical engineering equated and equivalent ex lege to the degrees under the old educational system; Italian Interministerial Decree of 9 July 2009 on the equivalence between old educational system degrees, specialist ▇▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇ degrees and Laurea Magistrale (equivalent to Masters Master of Science) degrees is available at the following link: ▇▇▇▇://▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇▇/▇▇▇▇.▇▇▇ The Interministerial Decrees that ratify the equivalency Decree establishing equivalences between Italian academic qualifications for the purposes of participating participation in public competitions are available at the following link: ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇/▇▇▇/▇▇▇▇▇▇▇▇▇▇/▇▇▇▇▇▇▇▇▇▇▇▇-▇▇▇▇▇▇.▇▇▇▇ The following will also constitute assessable qualifications: Manufacturing processes, Production systems, Optimization methods The requirementsRequirements, qualifications, experience and expertise knowledge must be strictly be declared on the application for participation rendered in accordance with form submitted pursuant to Articles 46 and 47 of Italian Presidential Decree No 445/2000 and held at possessed by the deadline for submitting the application for admission to the selection. Those who have a familial relationship of kinship or kinship relationshipaffinity, up to the 4th degree inclusive, with a professor of from the Department of Mechanical Management, Economics and Industrial Engineering, with the Rector, with the Director Director-General or with a member of the Board of Governors Governors, in accordance with the provisions of Article 18, paragraph 1, letter c) of Italian Law No 240/2010, may not participate in the selection procedure, in accordance with . In the provisions of Art. 18 paragraph 1 letter c) of Italian Law 240/2010. If event that the above qualification(s) indicated above was/were obtained abroad, it/they must be (an) an official qualification(s) of the foreign university system, issued by an institution officially recognized recognised in the relevant foreign reference system and it/they must be equivalent, for the sole selection purposes of the selectiononly, by in nature, level and disciplinary correspondence, to the respective Italian qualification indicated above.

Participation requirements. To be admitted to the selection, the The following requirements must be heldmet for admission to the selection: - Master Degree in Mechanical Engineering; - Master Degree in Management Engineering Interministerial Decree 9.7.2009 on the equivalency between Lauree Laurea Magistrale (equivalent to Bachelors Master of Science) in LM-4 - Architecture and Architectural engineering equated and equivalent ex lege to the degrees under the old educational system; Italian Interministerial Decree of 9 July 2009 on the equivalence between old educational system degrees, specialist ▇▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇ degrees and Laurea Magistrale (equivalent to Masters Master of Science) degrees is available at the following link: ▇▇▇▇://▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇▇/▇▇▇▇.▇▇▇ The Interministerial Decrees that ratify the equivalency Decree establishing equivalences between Italian academic qualifications for the purposes of participating participation in public competitions are available at the following link: ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇/▇▇▇/▇▇▇▇▇▇▇▇▇▇/▇▇▇▇▇▇▇▇▇▇▇▇-▇▇▇▇▇▇.▇▇▇▇ The following will also constitute assessable qualifications: Manufacturing processes, Production systems, Optimization methods The requirementsresearch experience on the topics covered by the activities Requirements, qualifications, experience and expertise knowledge must be strictly be declared on the application for participation rendered in accordance with form submitted pursuant to Articles 46 and 47 of Italian Presidential Decree No 445/2000 and held at possessed by the deadline for submitting the application for admission to the selection. Those who have a familial relationship of kinship or kinship relationshipaffinity, up to the 4th degree inclusive, with a professor of from the Department of Mechanical Architecture, Built Environment and Construction Engineering, with the Rector, with the Director Director- General or with a member of the Board of Governors Governors, in accordance with the provisions of Article 18, paragraph 1, letter c) of Italian Law No 240/2010, may not participate in the selection procedure, in accordance with . In the provisions of Art. 18 paragraph 1 letter c) of Italian Law 240/2010. If event that the above qualification(s) indicated above was/were obtained abroad, it/they must be (an) an official qualification(s) of the foreign university system, issued by an institution officially recognized recognised in the relevant foreign reference system and it/they must be equivalent, for the sole selection purposes of the selectiononly, by in nature, level and disciplinary correspondence, to the respective Italian qualification indicated above.

Participation requirements. To be admitted to the selection, the The following requirements must be heldmet for admission to the selection: Laurea Triennale in L-8 - Master Degree in Mechanical Engineering; Information Technology or L-9 - Master Degree in Management Industrial Engineering Interministerial Decree 9.7.2009 on equated and equivalent ex lege to the equivalency between Lauree (equivalent to Bachelors of Science) degrees under the old educational system; Italian Interministerial Decree of 9 July 2009 on the equivalence between old educational system degrees, specialist ▇▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇ degrees and Laurea Magistrale (equivalent to Masters Master of Science) degrees is available at the following link: ▇▇▇▇://▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇▇/▇▇▇▇.▇▇▇ The Interministerial Decrees that ratify the equivalency Decree establishing equivalences between Italian academic qualifications for the purposes of participating participation in public competitions are available at the following link: ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇/▇▇▇/▇▇▇▇▇▇▇▇▇▇/▇▇▇▇▇▇▇▇▇▇▇▇-▇▇▇▇▇▇.▇▇▇▇ The following will also constitute assessable qualifications: Manufacturing processes, Production systems, Optimization methods The requirementsRequirements, qualifications, experience and expertise knowledge must be strictly be declared on the application for participation rendered in accordance with form submitted pursuant to Articles 46 and 47 of Italian Presidential Decree No 445/2000 and held at possessed by the deadline for submitting the application for admission to the selection. Those who have a familial relationship of kinship or kinship relationshipaffinity, up to the 4th degree inclusive, with a professor of from the Department of Mechanical Management, Economics and Industrial Engineering, with the Rector, with the Director Director-General or with a member of the Board of Governors Governors, in accordance with the provisions of Article 18, paragraph 1, letter c) of Italian Law No 240/2010, may not participate in the selection procedure, in accordance with . In the provisions of Art. 18 paragraph 1 letter c) of Italian Law 240/2010. If event that the above qualification(s) indicated above was/were obtained abroad, it/they must be (an) an official qualification(s) of the foreign university system, issued by an institution officially recognized recognised in the relevant foreign reference system and it/they must be equivalent, for the sole selection purposes of the selectiononly, by in nature, level and disciplinary correspondence, to the respective Italian qualification indicated above.

Participation requirements. To be admitted to the selection, the The following requirements must be heldmet for admission to the selection: - Master Degree in Mechanical Engineering; - Master Degree in Management Engineering Interministerial Decree 9.7.2009 on the equivalency between Lauree Laurea Magistrale (equivalent to Bachelors Master of Science) in LM-54 - Chemistry equated and equivalent ex lege to the degrees under the old educational system; Italian Interministerial Decree of 9 July 2009 on the equivalence between old educational system degrees, specialist ▇▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇ degrees and Laurea Magistrale (equivalent to Masters Master of Science) degrees is available at the following link: ▇▇▇▇://▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇▇/▇▇▇▇.▇▇▇ The Interministerial Decrees that ratify the equivalency Decree establishing equivalences between Italian academic qualifications for the purposes of participating participation in public competitions are available at the following link: ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇/▇▇▇/▇▇▇▇▇▇▇▇▇▇/▇▇▇▇▇▇▇▇▇▇▇▇-▇▇▇▇▇▇.▇▇▇▇ The following will also constitute assessable qualifications: Manufacturing processes, Production systems, Optimization methods The requirementsRequirements, qualifications, experience and expertise knowledge must be strictly be declared on the application for participation rendered in accordance with form submitted pursuant to Articles 46 and 47 of Italian Presidential Decree No 445/2000 and held at possessed by the deadline for submitting the application for admission to the selection. Those who have a familial relationship of kinship or kinship relationshipaffinity, up to the 4th degree inclusive, with a professor of from the Department of Mechanical Civil and Environmental Engineering, with the Rector, with the Director Director-General or with a member of the Board of Governors Governors, in accordance with the provisions of Article 18, paragraph 1, letter c) of Italian Law No 240/2010, may not participate in the selection procedure, in accordance with . In the provisions of Art. 18 paragraph 1 letter c) of Italian Law 240/2010. If event that the above qualification(s) indicated above was/were obtained abroad, it/they must be (an) an official qualification(s) of the foreign university system, issued by an institution officially recognized recognised in the relevant foreign reference system and it/they must be equivalent, for the sole selection purposes of the selectiononly, by in nature, level and disciplinary correspondence, to the respective Italian qualification indicated above.

Participation requirements. To be admitted to the selection, the The following requirements must be heldmet for admission to the selection: PhD and Master in LM-4 - Master Degree in Mechanical Engineering; - Master Degree in Management Engineering Interministerial Decree 9.7.2009 on Architecture and Architectural engineering equated and equivalent ex lege to the equivalency between Lauree (equivalent to Bachelors of Science) degrees under the old educational system; Italian Interministerial Decree of 9 July 2009 on the equivalence between old educational system degrees, specialist ▇▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇ degrees and Laurea Magistrale (equivalent to Masters Master of Science) degrees is available at the following link: ▇▇▇▇://▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇▇/▇▇▇▇.▇▇▇ The Interministerial Decrees that ratify the equivalency Decree establishing equivalences between Italian academic qualifications for the purposes of participating participation in public competitions are available at the following link: ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇/▇▇▇/▇▇▇▇▇▇▇▇▇▇/▇▇▇▇▇▇▇▇▇▇▇▇-▇▇▇▇▇▇.▇▇▇▇ The following will Experience in design research is required, if possible bottom/up with research by design methodologies. Demonstrable experience not only through participation in research, but also constitute assessable qualifications: Manufacturing processesattributable to the publication of articles or article in books. Experience in teaching is also required, Production systems, Optimization methods The requirementsparticularly in architectural and urban design. Requirements, qualifications, experience and expertise knowledge must be strictly be declared on the application for participation rendered in accordance with form submitted pursuant to Articles 46 and 47 of Italian Presidential Decree No 445/2000 and held at possessed by the deadline for submitting the application for admission to the selection. Those who have a familial relationship of kinship or kinship relationshipaffinity, up to the 4th degree inclusive, with a professor of from the Department of Mechanical EngineeringArchitecture and Urban Studies, with the Rector, with the Director Director-General or with a member of the Board of Governors Governors, in accordance with the provisions of Article 18, paragraph 1, letter c) of Italian Law No 240/2010, may not participate in the selection procedure, in accordance with . In the provisions of Art. 18 paragraph 1 letter c) of Italian Law 240/2010. If event that the above qualification(s) indicated above was/were obtained abroad, it/they must be (an) an official qualification(s) of the foreign university system, issued by an institution officially recognized recognised in the relevant foreign reference system and it/they must be equivalent, for the sole selection purposes of the selectiononly, by in nature, level and disciplinary correspondence, to the respective Italian qualification indicated above.

Participation requirements. To be admitted to the selection, the The following requirements must be heldmet for admission to the selection: - Master Degree in Mechanical Engineering; - Master Degree in Management Engineering Interministerial Decree 9.7.2009 on the equivalency between Lauree Laurea Magistrale (equivalent to Bachelors Master of Science) in LM-33 - Mechanical engineering equated and equivalent ex lege to the degrees under the old educational system; Italian Interministerial Decree of 9 July 2009 on the equivalence between old educational system degrees, specialist ▇▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇ degrees and Laurea Magistrale (equivalent to Masters Master of Science) degrees is available at the following link: ▇▇▇▇://▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇▇/▇▇▇▇.▇▇▇ The Interministerial Decrees that ratify the equivalency Decree establishing equivalences between Italian academic qualifications for the purposes of participating participation in public competitions are available at the following link: ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇/▇▇▇/▇▇▇▇▇▇▇▇▇▇/▇▇▇▇▇▇▇▇▇▇▇▇-▇▇▇▇▇▇.▇▇▇▇ The following will also constitute assessable qualifications: Manufacturing processes, Production systems, Optimization methods The requirementsExperience in calculating the dynamic behavior of road vehicles with exclusive reference to stability. Demonstrated knowledge of ▇▇▇▇▇▇▇ theory. Knowledge of road vehicle construction. Demonstrable experience in writing scientific papers at conferences and in journals. Requirements, qualifications, experience and expertise knowledge must be strictly be declared on the application for participation rendered in accordance with form submitted pursuant to Articles 46 and 47 of Italian Presidential Decree No 445/2000 and held at possessed by the deadline for submitting the application for admission to the selection. Those who have a familial relationship of kinship or kinship relationshipaffinity, up to the 4th degree inclusive, with a professor of from the Department of Mechanical Engineering, with the Rector, with the Director Director-General or with a member of the Board of Governors Governors, in accordance with the provisions of Article 18, paragraph 1, letter c) of Italian Law No 240/2010, may not participate in the selection procedure, in accordance with . In the provisions of Art. 18 paragraph 1 letter c) of Italian Law 240/2010. If event that the above qualification(s) indicated above was/were obtained abroad, it/they must be (an) an official qualification(s) of the foreign university system, issued by an institution officially recognized recognised in the relevant foreign reference system and it/they must be equivalent, for the sole selection purposes of the selectiononly, by in nature, level and disciplinary correspondence, to the respective Italian qualification indicated above.

Participation requirements. To be admitted to the selection, the The following requirements must be heldmet for admission to the selection: - Master Degree in Mechanical Engineering; - Master Degree in Management Engineering Interministerial Decree 9.7.2009 on the equivalency between Lauree Laurea Magistrale (equivalent to Bachelors Master of Science) in LM-33 - Mechanical engineering or LM-44 - Mathematical modelling for engineering equated and equivalent ex lege to the degrees under the old educational system; Italian Interministerial Decree of 9 July 2009 on the equivalence between old educational system degrees, specialist ▇▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇ degrees and Laurea Magistrale (equivalent to Masters Master of Science) degrees is available at the following link: ▇▇▇▇://▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇▇/▇▇▇▇.▇▇▇ The Interministerial Decrees that ratify the equivalency Decree establishing equivalences between Italian academic qualifications for the purposes of participating participation in public competitions are available at the following link: ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇.▇▇/▇▇▇▇▇▇▇▇/▇▇▇/▇▇▇▇▇▇▇▇▇▇/▇▇▇▇▇▇▇▇▇▇▇▇-▇▇▇▇▇▇.▇▇▇▇ The following will also constitute assessable qualifications: Manufacturing processes, Production systems, Optimization methods The requirementsRequirements, qualifications, experience and expertise knowledge must be strictly be declared on the application for participation rendered in accordance with form submitted pursuant to Articles 46 and 47 of Italian Presidential Decree No 445/2000 and held at possessed by the deadline for submitting the application for admission to the selection. Those who have a familial relationship of kinship or kinship relationshipaffinity, up to the 4th degree inclusive, with a professor of from the Department of Mechanical Engineering, with the Rector, with the Director Director-General or with a member of the Board of Governors Governors, in accordance with the provisions of Article 18, paragraph 1, letter c) of Italian Law No 240/2010, may not participate in the selection procedure, in accordance with . In the provisions of Art. 18 paragraph 1 letter c) of Italian Law 240/2010. If event that the above qualification(s) indicated above was/were obtained abroad, it/they must be (an) an official qualification(s) of the foreign university system, issued by an institution officially recognized recognised in the relevant foreign reference system and it/they must be equivalent, for the sole selection purposes of the selectiononly, by in nature, level and disciplinary correspondence, to the respective Italian qualification indicated above.