Common use of ABRAJ STANDARD TERMS & CONDITIONS Clause in Contracts

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. To: Xx-Xxxxxxx, XX Xxx 0000, XX 000, Xxxxxx, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. To: Xx-Xxxxxxx, XX Xxx 0000, XX 000, Xxxxxx, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within ……. Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. PC.230205.SCM.P004, Rig Move for Abraj Rigs (205 and 210) including Rig Main Camp & Accessories in OQ Block 60 Fields To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name Address And whose Agency Registration Number is Dated

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. MITC.230308.SCM.M027, Rig Move for Xxxxx Xxxx (205 and 210) including Rig Main Camp & Accessories in OQ Block 60 Fields To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. MITC.230503.OPS.M063, RATE AGREEMENT FOR SUPPLY OF BOP CONTROL To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name Address And whose Agency Registration Number is Dated Abraj Energy Services (AES), since it was founded in May 2006, has taken major strides and has rapidly grown to become a strong player in the Oil and Gas market. AES specializes in Drilling and Oilfield services as well as Well Engineering Solutions. Within few years of its establishment, AES has achieved a remarkable place in the local market providing solutions and services in a safe environment and up to customer satisfaction. Lately Abraj has expanded its operation outside Oman and expected to start operation in Kuwait Xxxxx is issuing this tender for having a rate agreement contract for the Supply of Blowout Preventer as per the Scope of Work for JO Project and Rigs operating in Oman.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. MITC.230309.HR.M029, Rig Move for Xxxxx Xxxx (205 and 210) including Rig Main Camp & Accessories in OQ Block 60 Fields To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name Address And whose Agency Registration Number is Dated The following scope of work has been developed to define the demand for Rig Operating System such as NOVOS, Opera and Smart ROS (or equivalent) for Abraj new three rigs in Kuwait. Supplier is required to provide all of below Rig Operating System specifications as per the given details in accordance with Abraj requirements and minimum standards. The quantity listed is based on Abraj current fleet in Kuwait and this can be increased in cause of extra units been added to the fleet. 1. The vender must provide Rig Operating System with all associated certifications and operating manuals, including with detailed specifications and features. Vender must commit to provide minimum of following documents during delivery of tools: a. COC b. Installation, operation and maintenance manuals. c. Commissioning and test report 2. Delivery incoterm: DDP Kuwait with the full integration. 3. All equipment must be brand new. 4. Total quantity is for 8 different rigs. (3 for new rigs on Kuwait and 5 for existing rigs on Oman) 5. Bidder shall confirm the capability to install and integrate the first 3 rigs in China HH factory 6. Bidder shall submit below information as mandatory a. Delivery Period. b. Integration and commission period. c. Experience in the same SOW (location and clients details) d. Years of Warranty/ Grantee for the system. 1. System shall have capacity to store 6 months of data at a minimum and allow to transfer stored data on a common memory media, and to export selected (period & parameters) stored data in a common data format (e.g., TXT file) for transfer to Company when requested. 2. System must provide drilling, tripping, reaming, PVT displays, etc, and allow customization of displays. Touchscreen displays/station for driller's console (appropriately rated for use on rig floor). 3. Functional connection port for a Company 3rd party to connect to the system and to export all recorded data real-time to Company 3rd party in WITSML format. 4. The system has ability to monitor and record electronic rig data system, and all required electronic sensors/transducers. Such Data to be recorded must include at a minimum: hole depth, bit depth, hook load, overpull, surface torque, surface RPM, WOB, ROP, hook height, return flow, standpipe pressure, individual pump rates, SPM & strokes, total combined pump rate and strokes, individual pits volumes, total active volume, trip tank volume, gain/loss. Electronic pit sensors on all individual pits choke manifold pressure, integrated in rig data system. 7. System Shall be capable to have all integrated with equipment manufactured by leading manufacturers such as below: a. Rig Instrumentation system: MD TOTCO (Primary) or any equivalent system b. Top Drive: Bentec, NOV, Canrig c. Drawworks: HH (Primary) d. VFD control system supplied by HH e. Mud Pump: HH f. Generators: CAT 3512B g. Pipe Handling Equipment (Power Slip, Automated Catwalk, Iron Roughneck, Arm Manipulator, etc.): NOV, Canrig, HH, etc. 8. System must provide minimum drilling features as below: a. Configuration for automatic slips selections (Manual Slips and Power Slips) b. Configuration for automatic elevator selections (Manual elevator and Power elevator) c. Pre-set Drilling Parameters. provide drilling parameter limits and flow rate settings used in drilling operations d. Tag Bottom Configuration (Tag bottom off bottom margin, Tag bottom Feedback time, Lowering speed, Auto driller engage height, Tag bottom ROP, Stabilization WOB and Auto drill enable) e. Drilling Configuration with minimum of four modes, ROP, WOB, DeltaP, and Torque. f. Drill Off Configuration to enhance the drilling efficiency g. Friction Test model h. Anti Stick Slip model i. Downlink, automatic adjustment of TD RPM, Mud Flow, drawworks speed j. Slide-Pilot to improve target achievement accuracy (optional). k. Survey (MWD activation initial flow rate, MWD activation trigger flow rate, MWD Activation Trigger flow timer, Survey Bit Height and Survey confirmation timer). x. Xxxx (Xxxx Distance, Xxxx down block speed, Xxxx Down Flow, Xxxx Down RPM, Xxxx Up block speed, Xxxx Up flow and Xxxx Up RPM). m. Hole Cleaning (Clean hole time limit). 9. Station in company man and tool pusher office to display rig data in real-time (optional). 10. System shall be monitored remotely from Abraj head office or through online platform (optional). 11. System shall be capable to have all 3rd party automation applications and any other external application (optional). FROM: Supply Chain Department DOCUMENT: AES-02 / Expression of Interest TENDER REFERENCE MITC.230503.OPS.M071, RATE AGREEMENT FOR SUPPLING RIG OPERATING SYSTEM FOR KUWAIT RIGS Dear Sir/Madam, You are hereby invited to express your interest (EOI) for the above mentioned tender and confirms the following: To register your interest please complete the forms listed below duly signed by authorized signatory and submitted within three (3) days of reviewing the Invitation to Tender (ITT) to: Xxxxxxxx@xxxxxxxxxxx.xxx 1. Annexure-03 Interest to Participate in Tender and Confidentiality Declaration for Tender 2. Annexure-04 Declaration to Comply with Company Requirement Please note that all submissions and communications pursuant to this EOI notice shall bear following caption the Tender Reference Our pre-qualification and tendering processes shall follow your EOI. If we do not receive any response from you on or before the above mentioned date, you will not be eligible to participate in this tender. Xxxxx takes this opportunity to wish you all the best and we hope to deal with you soon. Regards, Supply Chain Department Abraj Energy Services S.A.O.G. FROM: Supply Chain Department DOCUMENT: AES-03 / Interest to Participate in Tender and Confidentiality Declaration for Tender TENDER REFERENCE MITC.230503.OPS.M071, RATE AGREEMENT FOR SUPPLING RIG OPERATING SYSTEM FOR KUWAIT RIGS Attention: Contracts Officer Dear Sir/Madam, Having reviewed the Tender Document our company would like to register our interest in bidding for above referenced tender. We the undersigning party (hereinafter called the ‘Bidder’) hereby represents and warrants to ABRAJ ENERGY SERVICES SAOG, being a company incorporated under the laws of the Sultanate of Oman having its Head Office at Al-Mawaleh, PO Box 1156, PC 130, Azaiba, Muscat, Sultanate of Oman (hereinafter called the 'Company') to be unconditionally bound by the following terms and conditions with respect to the receipt, review, and treatment of all information and documents provided to the Bidder by or on behalf of the Company, including but not limited to the Tender Documents, in connection with the Tender Reference mentioend above. 1.1. Confidential Information shall mean all knowledge, data or information in connection with this Tender or the Project, which from time to time may be disclosed to the Bidder by Company, or on behalf of Company, in writing, including drawings, magnetic tapes, computer programs or in any other way, as well as all knowledge, data or information derived there from, to the extent that such knowledge, data or information at the time of such acquisition or disclosure is not either already in the unrestricted possession of Contractor or part of public knowledge or literature. 1.2. Confidential Record shall mean all documents and any other material containing Confidential Information. 2.1. The Bidder shall: (a) preserve and cause its employees, potential Subcontractors and Manufacturers to preserve the secrecy of any Confidential Information; (b) not disclose, except with the prior written consent of the Company, to any Third Party any Confidential Information or Confidential Record or enable any Third Party to note the fact that the Bidder has been invited to submit a Tender for the work for any purpose other than the performance of the work or the preparation and submission of a Tender for the work; (c) not, except with the prior written consent of the Company, reproduce, copy or use, or disclose to, place at the disposal of or use on behalf of any Third Party or enable any Third Party to peruse, copy or use, any Confidential Information for any purpose other than the performance of the work or the preparation and submission of a Tender for the work. 2.2. The Bidder may disclose Confidential Information or Confidential Records as required by law or to a court or tribunal of competent jurisdiction if an order for such disclosure is made and, in those circumstances, only to the extent necessary by law or to satisfy such order for disclosure. The Bidder shall notify the Company prior to any such disclosure and shall provide all reasonable assistance as may be requested by the Company to prevent or minimize such disclosure. 2.3. The undertakings under Clause 2.1 above shall continue so far as the Confidential Information in question has: (a) not become part of public knowledge or literature, or (b) not been disclosed to the Bidder by a Third Party (other than one disclosing on behalf of the Company) whose possession of such information is lawful and who is under no secrecy obligation with respect to the same. 3.1. All intellectual property rights, including but not limited to copyright, patents, trademarks, moral rights and industrial design rights in any Confidential Record shall, in the absence of any express provision to the contrary thereon, be vested in the Company. 4.1. In the event that it is decided by the Company that the tendered work will be entrusted to another Bidder, or if the tender process is terminated or suspended by the Company for any reason whatsoever, the Bidder shall, upon receipt of a written notification thereof from the Company, return to the Company the Tender Documents as well as any Confidential Record pertaining thereto and delete any electronic record thereof in Bidder’s possession. 5.1. The Bidder shall ensure that if, under the terms of this Confidentiality Declaration, any of the Confidential Information comes to the knowledge of and/or into the possession of any Third Party, the Bidder shall require from such Third Party that it shall abide by identical stipulations to those contained in this Confidentiality Declaration. 5.2. Notwithstanding the above clause 5.1, the Bidder shall at all times remain liable to Company for any breach of the obligations under this Confidentiality Declaration, irrespective of whether or not the disclosure is actually caused by the Bidder or a Third Party to whom the Bidder has disclosed the Confidential Information. 6.1 This Confidentiality Declaration shall be governed by and construed in accordance with the Laws of the Sultanate of Oman. 6.2 In the event of a dispute arising under or in connection with this Confidentiality Declaration, including with respect to the existence, operation or validity of this Confidentiality Declaration, such dispute shall be resolved by arbitration in accordance with the arbitration proceedings and shall be conducted in the English language and the seat of the arbitration shall be Muscat, Sultanate of Oman. Yours faithfully for: ……………………………………………………………………………….. Signature & date: ………………………………………………………………………………… Full Name: ………………………………………………………………………………………… Position: …………………………………………………………………………………………… Stamp of Bidder Whereas M/s. ……………………… confirm to comply with company requirements as per below checklist: Item Description Required by Company (Yes/No) Supplier Confirmation (Yes/No) Comments Failure to comply with the above checklist will result in Bidder being disqualified from the tendering process. Xxxxxx and accepted this ................... Day of [Insert year] For and on behalf of Bidder: Xx-Xxxxxxx, PO Box 1156, PC 130, Azaiba,

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. MITC.230419.SCM.M056, Rig Move for Xxxxx Xxxx (205 and 210) including Rig Main Camp & Accessories in OQ Block 60 Fields To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. Hand Tools Supply of Hand Tools for the Kuwait Project To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name Address And whose Agency Registration Number is Dated The following scope of work has been developed to define the demanded hand tools for Xxxxx’s new three rigs in Kuwait. Supplier is required to provide all the below tools as per the given details in accordance with Abraj requirements and minimum standards. The quantity of listed hand tools is based on Xxxxx’s current fleet in Kuwait, and this can be increased in case of extra units being added to the fleet. 1. The bidder must provide brand-new hand tools with all associated certifications and operating manuals, with detailed specifications. Bidder shall submit COC for the Materials when required (if applicable). 2. Bidder shall quote only for the brands mentioned in the description of the SOW or the approved brands as an alternative (XXXXXX, RIGID, OTECO, Snap-On, and PROTO). 3. Bidder can propose and quote for sets as alternatives. E.g. all screwdrivers on set.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name Address And whose Agency Registration Number is Dated Abraj Energy Services (AES), since it was founded in May 2006, has taken major strides and has rapidly grown to become a strong player in the Oil and Gas market. AES specializes in Drilling and Oilfield services as well as Well Engineering Solutions. Within few years of its establishment, AES has achieved a remarkable place in the local market providing solutions and services in a safe environment and up to customer satisfaction. Lately Abraj has expanded its operation outside Oman and expected to start operation in Kuwait Xxxxx is issuing this tender for having a rate agreement contract for the supply of API Connection Tubular as per the Scope of Work.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. To: Xx-Xxxxxxx, XX Xxx 0000, XX 000, Xxxxxx, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name Address And whose Agency Registration Number is Dated Abraj Energy Services (AES), since it was founded in May 2006, has taken major strides and has rapidly grown to become a strong player in the Oil and Gas market. AES specializes in Drilling and Oilfield services as well as Well Engineering Solutions. Within few years of its establishment, AES has achieved a remarkable place in the local market providing solutions and services in a safe environment and up to customer satisfaction.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. C To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. To: Xx-Xxxxxxx, XX Xxx 0000, XX 000, Xxxxxx, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O R.O. ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. Rate Agreement For Supply IDM parts for Rig 203-204 To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. ) 2 We undertake if our Tender is accepted to commence the work in accordance within ……. Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. PC.230307.SCM.P016, Rig Move for Xxxxx Xxxx (205 and 210) including Rig Main Camp & Accessories in OQ Block 60 Fields To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. MITC.230319.SCM.M036, Rig Move for Xxxxx Xxxx (205 and 210) including Rig Main Camp & Accessories in OQ Block 60 Fields To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. MITC.230402.OPS.M045 , Rig Move for Xxxxx Xxxx (205 and 210) including Rig Main Camp & Accessories in OQ Block 60 Fields To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. MITC.230326.SCM.M041, Rig Move for Xxxxx Xxxx (205 and 210) including Rig Main Camp & Accessories in OQ Block 60 Fields To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. MITC.230415.OPS.M048, Rig Move for Xxxxx Xxxx (205 and 210) including Rig Main Camp & Accessories in OQ Block 60 Fields To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name Address And whose Agency Registration Number is Dated The following scope of work has been developed to define the demand for Battery Energy Storage Systems XXXX for Abraj new three rigs in Kuwait. Supplier is required to provide all of below XXXX as per the given details in accordance with Abraj requirements and minimum standards. The quantity listed is based on Abraj current fleet in Kuwait and this can be increased in cause of extra units been added to the fleet. 1. The vender must provide brand new XXXX with all associated certifications and operating manuals, including dimensional drawings with detailed specifications. Vender must commit to provide minimum of following documents during delivery of tools: a. Data sheet and performance curve b. Manufacturing record book c. COC d. Installation, operation and maintenance manuals e. Load test certificate for lifting points f. GAD, Electrical and Mechanical drawing.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. MITC.230319.SCM.M035, Rig Move for Xxxxx Xxxx (205 and 210) including Rig Main Camp & Accessories in OQ Block 60 Fields To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. MITC.230319.SCM.M037, Rig Move for Xxxxx Xxxx (205 and 210) including Rig Main Camp & Accessories in OQ Block 60 Fields To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name Address And whose Agency Registration Number is Dated Abraj Energy Services (AES), since it was founded in May 2006, has taken major strides and has rapidly grown to become a strong player in the Oil and Gas market. AES specializes in Drilling and Oilfield services as well as Well Engineering Solutions. Within few years of its establishment, AES has achieved a remarkable place in the local market providing solutions and services in a safe environment and up to customer's satisfaction. Abraj is issuing this tender for making rate agreement contract for purchase of Hydraulic Cylinder for Hoist 04 & 05 as per technical specification mentioned below in document. TELESCOPIC CYLINDER ASSEMBLY, HYDRAULIC, MAKE: ZJ 30, XX XXXXX, P/N: Z07130000019AA (ONLY FOR RIG-101) NEW PN: 5481100089151589 ABRAJ IC: 1002258 2 TELESCOPIC CYLINDER ASSEMBLY, MAKE: XX XXXXX, PART NO: Z07130000012AA (ONLY FOR RIG- 102) NEW PN: 5481100090462626 ABRAJ IC: 1002077 2 MAST RISING CYLINDER, HYDRAULIC, ZJ 30, XX XXXXX, P/N: E4022000000 NEW PN: 5481100088987210, ABRAJ IC: 1002076 2 1. Comply to SOW. 2. Delivery Term: DDP Muscat (Preferred) 3. Warranty shall be not less than 12 Months.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. To: Xx-Xxxxxxx, XX Xxx 0000, XX 000, Xxxxxx, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name Address And whose Agency Registration Number is Dated Abraj Energy Services SAOG is in the process of floating a tender for a rate agreement for the provision of flatbed trailers for hoist equipment movements. This will include hoist equipments and other operational requirements needed within PDO fields. Item Type Quty Manufacture Year Load capacity (Ton) Suspension type Axle Configuration King Pin Size 1 Prime Mover (MAN) 10 2020 to 2024 Not less than 30.5 Leaf Spring (Heavy Duty) Double axle 3 ½” 2 40 Feet Flatbed Trailer 8 2018 to 2024 Not less than 40 Leaf Spring (Heavy Duty) Double axle 3 ½” 3 60 Feet Flatbed Trailer 2 2018 to 2024 Not less than 40 Leaf Spring (Heavy Duty) Double axle 3 ½”

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. STC.240912.HR.8000361. Rate Agreement for Sourcing Manpower Services To: Xx-Xxxxxxx, XX Xxx 0000, XX 000, Xxxxxx, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. MITC.230415.OPS.M047, Rig Move for Xxxxx Xxxx (205 and 210) including Rig Main Camp & Accessories in OQ Block 60 Fields To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name Address And whose Agency Registration Number is Dated The following scope of work has been developed to define the demanded Drill Collar for Abraj new three rigs in Kuwait. Supplier is required to provide all of below tubulars as per the given details in accordance with Abraj requirements and API standards. The quantity of listed tubulars is based on Abraj current fleet in Kuwait and this can be increased in cause of extra units been added to the fleet. 1. The vender must provide brand new tubulars with all associated certifications and operating manuals, including dimensional drawings with detailed specifications. Vender must commit to provide minimum of following documents during delivery of tools: a. Data sheet and performance curve b. Manufacturing record book c. COC d. Certificate for make and break e. Third party QA/QC certificates is must f. Certificate for cold roll g. Certificate for hard band h. Certificate for inspection i. Field inspection procedures

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. MITC.230410.WS.M054, RATE AGREEMENT TO SUPPLY GATE VALVES (BRAND MCM OIL TOOLS, INC) AND SPARE PARTS/CONSUMABLES (REPAIR KITS) To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name Address And whose Agency Registration Number is Dated Abraj Energy Services (AES), since it was founded in May 2006, has taken major strides and has rapidly grown to become a strong player in the Oil and Gas market. XXX specializes in Drilling and Oilfield services as well as Engineering Solutions. Within a few years of its establishment, AES has achieved a remarkable place in the local market providing solutions and services in a safe environment and up to customer satisfaction. Lately, Abraj has expanded its operation outside Oman and is expected to start operations in Kuwait Xxxxx is issuing this tender for having a Rate Agreement for the supply of a Gas Booster Pump as per the Scope of Work for Rigs operating in Oman. SN Description Item Code UOM Qty 1 GAS BOOSTER PUMP, MAKE: HIP USA, PUMP MODEL: S-86-JN-30, RATIO: 30:1, DRIVE AIR: 25 TO 200 PSI, INLET PRESSURE 200-6000 PSI, OUTLET PRESSURE: 750-6000 PSI C/W NEEDLE VALVE, MANIFOLD GAUGE, AIR CONTROL UNIT, OUTLET PRESSURE GAUGE ETC 1. Air inlet connection should be 1”. 2. Booster Pump shall be installed with a pressure relief valve to protect the equipment from over-pressurization 3. There shall be a steel skid preferably with the enclosure to protect the unit from damage during transportation and handling. 1004423 Set 25 A. Bidder shall submit drawing & layout for Gas Booster Pump B. Bidder has to offer a minimum 1-year warranty, the extended warranty will be preferred C. This Contract is purely a rate agreement contract and Xxxxx doesn’t commit to buy all requested in the contract. D. A separate PO will be issued for the purchase of each item listed in the Scope. E. Certificate of Conformance F. O&M Manual G. Part list book H. Warranty Certificate I. Certificate of Origin 1. Bidder to Specify the Lead time for Delivery, DDP (Muscat/Oman) 2. Bidder shall offer min 12-month warranty. An extended Warranty is preferred. 3. Bidder shall submit the OEM manual & Technical Datasheet along with Bid.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. To: Xx-Xxxxxxx, XX Xxx 0000, XX 000, Xxxxxx, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name Address And whose Agency Registration Number is Dated Abraj Energy Services SAOG is floating a tender for the provision of Rig moving and associated services within the OQ, OXY and BP concession area. The move will include all Rig loads, rig site camp, chemicals, and client rig material. The attached detailed Rig load list includes all of the various loads, sizes, and types of trucks required. Prior each move, the contractor is required to cross-check the list and do an actual survey of loads to their satisfaction to assess the number of loads and type of trucks required i.e. normal, wide, etc.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. MITC.230503.OPS.M063, RATE AGREEMENT FOR SUPPLY OF BOP CONTROL To: Xx-Xxxxxxx, XX Xxx 0000, XX 000, Xxxxxx, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name Address And whose Agency Registration Number is Dated Abraj Energy Services (AES), since it was founded in May 2006, has taken major strides and has rapidly grown to become a strong player in the Oil and Gas market. AES specializes in Drilling and Oilfield services as well as Well Engineering Solutions. Within few years of its establishment, AES has achieved a remarkable place in the local market providing solutions and services in a safe environment and up to customer satisfaction. Lately Abraj has expanded its operation outside Oman and expected to start operation in Kuwait Abraj is issuing this tender for having a rate agreement contract for the Supply of Blowout Preventer as per the Scope of Work for JO Project and Rigs operating in Oman.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. MITC.230409.OPS.M053, Rig Move for Xxxxx Xxxx (205 and 210) including Rig Main Camp & Accessories in OQ Block 60 Fields To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name Address And whose Agency Registration Number is Dated Abraj Energy Services (AES), since it was founded in May 2006, has taken major strides and has rapidly grown to become a strong player in the Oil and Gas market. AES specializes in Drilling and Oilfield services as well as Well Engineering Solutions. Within few years of its establishment, AES has achieved a remarkable place in the local market providing solutions and services in a safe environment and up to customer satisfaction.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. MITC.230117.OPS.M005, Rig Move for Xxxxx Xxxx (205 and 210) including Rig Main Camp & Accessories in OQ Block 60 Fields To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. To: Xx-Xxxxxxx, XX Xxx 0000, XX 000, Xxxxxx, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within ……. Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name Address And whose Agency Registration Number is Dated Abraj Energy Services SAOC is floating a tender to rent 7 box trailers and 2 low beds (Long, 70 TN & 100 TN) with prime movers and drivers to be utilized in Frac 2 unit in PDO sites for duration of 6 months extendable. ▪ The contractor is required to provide an offer for 7 x 40 feet box trailers and 2 x low beds (long, 70 TN & 100 TN) with prime movers and expat drivers to be operated at the Frac location. The equipment must comply with OPAL road safety standards, including Satellite IVMS. ▪ All trailers must be provided with heavy-duty leaf spring suspension. ▪ All prime movers should be double axel. ▪ Diesel will be provided by Abraj. ▪ Food and accommodation will be provided by Xxxxx at the site. Accommodation at Xxxx should be provided by the contractor. ▪ The driver must have the required permits to operate the trailers and prime movers as per ROP, Abraj, and PDO requirements. ▪ The contractor is responsible for ensuring that all personnel have passed the required HSE safety training and are competent to perform their duties safely and efficiently. ▪ The contractor must ensure the safety and security of all hoist accessories during transportation. ▪ All trailers involved in the movement must be properly maintained and meet safety standards. ▪ The contractor must comply with all current PDO-related requirements. ▪ The contractor shall install IVMS and fatigue systems on all trailers. ▪ The contractor is expected to ensure the safe transportation of all Abraj equipment. Any damages during transportation will result in penalties for the contractor. ▪ In case of trailer breakdown or for renewal and maintenance, the contractor must provide a replacement immediately. Any delay in providing a replacement will result in Abraj hiring from a third party, with the cost deducted from the contractor's invoice. ▪ The contractor will be responsible for regular maintenance, lubricants, repairs, annual renewal of registration, and comprehensive insurance of trailers. ▪ If a subcontractor utilizes services from a third party, the subcontractor must state the number of trailers in their possession and must be approved by Xxxxx. ▪ Required service starts from October 1, 2024, and must be confirmed 2 weeks in advance. ▪ The driver’s age shall not be more than 60 years old ▪ The driver Shallhave a valid driving license. ▪ The driver shall have relevant certifications for operating the trailer as per Client rules and regulations as well as relevant health certificates. ▪ The driver is required to speak/read/write English. ▪ The driver Shallhave all necessary safety equipment and protective clothing PPE. (this shall be provided by the Contractor). ▪ The driver shall submit a daily trailer checklist along with maintenance schedule planning. ▪ The driver’s daily working time is 12 hours. ▪ The driver is not allowed to change any trailers without approval from the Hoist Manager.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. MJTC.230719.WS.R016, RATE AGREEMENT FOR WELL HEAD ISOLATION TOOL (WHIT) AND HYDRAULIC POWERPACK WITH HOSES To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name Address And whose Agency Registration Number is Dated Well Head Isolation Tool (WHIT) and Hydraulic power pack With hoses Abraj provide Fracs services to several oilfield clients in Oman, so in order to provide this service, a suitable Well head Isolation tool is utilized. Provide a WHIT with a hydraulic power pack and accessories (full set) a) Assembly COCs, XXXx for full Well head Isolation Tool assembly b) Individual COCs for each Xover, goat head, gate valve, etc installed on WHIT (Assembly) c) Assembly COCs, XXXx for full Hyd power pack assembly d) Individual COCs for each hydraulic cylinder in power pack e) COC for diesel engine f) Each item must be provided with OEM Part number and unique Serial Number g) Certificate of last hydrostatic pressure tests (1.5 times the working pressure) with charts and dates (22,500 PSI for items rated to 15,000 PSI, etc) h) Operation manual for Hydraulic power pack i) Hydraulic piping and connections schematics j) List of spare parts with specific part number for each k) Lifting certification for hyd power pack and WHIT WELLHEAD ISOLATION, TOOL 15K PSI WPF 4 1/2", MODEL: WS-IT-15K-4.5, MAKE: WELLHEAD SERVICES INC, P/N: WS-IT-15K-4.5 • Suitable for desert environment utilization, up to 55 degrees temperature working conditions • Power pack to be provided with crash/transport frame and minimum specifications as per below (or similar). o Hydraulic Power Unit,686 CC Diesel Engine,15 HP Kohler KDW702, Liquid Cooled to Operate at 55 C Temp, 3000 PSI Operating Pressure (PN WS- HPU15H7GPM3S) • Frame must be provided with forklift sockets (to allow easy handling/move) • Frame to be provided with four (04) lifting pad-eyes, four (04) shackles and one (01) four legs sling suitable for the weight of the skid • Crash/transport frame to be painted in red (epoxic paint) • The frame must be provided with covers/doors to ensure protection of the engine and parts during transportation/storage of severe weather conditions. These doors to be possibly removed for maintenance and with locks. • Power pack to be provided with Hydraulic accumulators cylinders capable to store Hydraulic pressure/energy to actuate two gate valves at least 2 cycles each in case of engine malfunction. • The Hydraulic cylinders accumulators must be manufactured not later than Q3 – 2021. • Control panel of the power pack to be provided with two pressure gauges (as minimum) for displaying Accumulators Hyd pressure and Hyd System pressure • Two handles commands to open close two separated Hydraulic gate valves • Three Station 5 to 7 GPM to control as per below: o One UP/Donw command to control Hydraulic RAMs/Cylinders of the WHIT o Two HP needled type or similar valves to isolate or drain the pressure from system. • Hyd. Pressure relief valves to ensure maximum working pressure is not exceeded. • Hydraulic reservoir tank for hydraulic oil as required • Diesel fuel reservoir tank for engine • High pressure Quick connections for all hyd hoses (rated above 3 KPSI) • Engine hour meter to track utilization • Key switch to control the start/stop of the engine • Skid frame must be provided with spill collection pan and drain valve and plug (1”)

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. MITC.230122.OPS.M006, Rig Move for Xxxxx Xxxx (205 and 210) including Rig Main Camp & Accessories in OQ Block 60 Fields To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name Address And whose Agency Registration Number is Dated Abraj Energy Services (AES), since it was founded in May 2006, has taken major strides and has rapidly grown to become a strong player in the Oil and Gas market. AES specializes in Drilling and Oilfield services as well as Well Engineering Solutions. Within few years of its establishment, AES has achieved a remarkable place in the local market providing solutions and services in a safe environment and up to customer's satisfaction. Abraj is issuing this tender for making rate agreement contract for purchase of Xxxxxx Pumps as per technical specification mentioned below in document. Xxxxxx-Xxxx 6" x 6” Super T Series® self-priming centrifugal trash pump. MODEL T6 T6A61S-B/F Pump will be 316 stainless steel fitted and have a 2-part epoxy paint. Pump will be mounted on common steel base and direct flex coupled to 40 HP TEFC 1750 RPM 3/60/460V electric motor - Capable of delivering a minimum of 120 m3/hr at a height of 8-10 meter - Have 6” suction and discharge connection - 2” instrumentation tie-in point at discharge, 300 Psi, flanged and fitted with a 2” valve and 4” analog pressure gauge - 2” bleed off point at discharge, 300 Psi, flanged and fitted with 2” valve Optional - Control Panel Non Ex rated - Control Panel suitable for Ex rated Zone 1 6 PUMP, CENTRIFUGAL, SELF PRIMING, MODEL: T6A3S-B, 240 M3/HR AT 24 M, W/75 HP EXPLOSION PROOF MOTOR, 60 HZ, 1800 RPM, 55 C DEG TEMP, 460 VOLT, ALONG AIR RELEASE VALVE (1 NOS), 1 NO OF NON RETURN VALVES PN 16 FLAP TYPE, COUPLING, LIFTING BAIL, MAKE: XXXXXX XXXX IC: 1003572 10 PUMP, CENTRIFUGAL, SELF PRIMING, MODEL: T6A3S-B, 240 M3/HR AT 24 M, W/75 HP EXPLOSION PROOF MOTOR, 50 HZ, 1800 RPM, 55 C DEG TEMP, 400 VOLT, ALONG AIR RELEASE VALVE (1 NOS), 1 NO OF NON RETURN VALVES PN 16 FLAP TYPE, COUPLING, LIFTING BAIL, MAKE: XXXXXX XXXX IC: 1004168 3 1. Comply to SOW. 2. Delivery Term: DDP Muscat (Preferred) 3. Warranty shall be not less than 12 Months.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. To: Rate Agreement for Inspection & Recertification of Drilling Stem Elements Xx-Xxxxxxx, XX Xxx 0000, XX 000, Xxxxxx, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name Address And whose Agency Registration Number is Dated Abraj Energy Services SAOG is floating a Rate Agreement for the Repair, inspection, and recertification of Drilling Stem Elements. The bidder shall comply with the Abraj inspection Matrix. The probation period is three months from the first call-off. CAT IV inspection API RP 7G-2 & API STD 53 Full Inspection—Cat IV: To be performed by an approved competent Inspector. All NDT inspections must be done by an accredited third party authorized by Abraj technical authority. “ 1. Fully open the valve and pump a small volume of fresh water through the valve to remove drilling mud residue from the ID bore of the valve. 2. If resources are available, pressurize the valve up to 300 Psi using a water and function valve to dislodge any mud from the seat spring and prevent any likelihood of being difficult to operate. 3. Fully close the valve and disassemble it completely. 4. Visually Inspect threads for damage, stretching, and galling. 5. Inspect the Valve bore, seat, and stem bores for internal scratches or excessive wear. 6. Perform Liquid penetrant (PT with fluorescent penetrants) on the following: • Box/pin thread areas. • Area inside the operating crank window. • Fillet radii of internal grooves and shoulders. 7. Change all the valve seat seals, Teflon rings, and stem/crank O-ring. 8. Reassemble the valve and fill it with high-grade lithium-based grease. 9. Function test valves without excessive force 10. Pressure test Xxxxx cock, Gray valve, and drop in sub to the rated working pressure in the direction of flow 11. Prepare and submit the full report as below, but not limited to • QAQC report • All test reports • COS c/w COC. Acceptance Criteria: 1. Pressure test@ WP: ⮚ Stage#1 • 3 minutes without any drop ( chart as evidence) ⮚ Stage#2: • 15 minutes without and drop (chart as evidence). 2. NDT report free of crack CAT IV inspection Full Inspection – Cat IV: To be performed by an approved competent Inspector. All NDT inspections must be done by an accredited third party approved by Abraj technical authority. 1. Fully open the valve and pump a small volume of fresh water through the valve to remove drilling mud residue from the ID bore of the valve. 2. If resources are available, pressurize the valve up to 300 Psi using a water and function valve to dislodge any mud from the seat spring and prevent any likelihood of being difficult to operate. 3. Fully close the valve and disassemble it completely. 4. Inspect threads for damage, stretching, and galling. 5. Inspect the Valve bore, seat, and stem bores for internal scratches or excessive wear. 6. Perform Liquid penetrant (PT with fluorescent penetrants) on the following: • Box/pin thread areas. • Area inside the operating crank window. • Fillet radii of internal grooves and shoulders. 7. Change all the valve seat seals, Teflon rings, and stem/crank O-ring. 8. Reassemble the valve and fill it with high-grade lithium-based grease. 9. Function test valves without excessive force 10. Pressure test Xxxxx cock, Gray valve, and drop in sub to the rated working pressure in the direction of flow 11. Prepare and submit the full report as below, but not limited to • QAQC report • All test reports • COS c/w COC. 1. Pressure test@ WP: ⮚ Stage#1 • 3 minutes without any drop ( chart as evidence) ⮚ Stage#2: • 15 minutes without and drop (chart as evidence). 2. NDT report free of crack API RP 7G-2, DS1 Vol3 Cat 3-5, DS1 Vol4 Cat 3-5 1. Clean with a wash gun, remove all debris, and clean all thread protectors. 2. Read and record the identification no. 3. Inspect the tool Joints a. Perform a dimensional inspection on the tool joints including but not limited to i. Box OD ii. Pin ID

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-non- responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O R.O. ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name ……………………………………………………. ……………………………………….. Address And whose Agency Registration Number is Dated Abraj Energy Services SAOC is in the process of floating a tender for overhauling & repairing EX AC Motors 1KW-25KW. 1. Dismantle and inspect all Motor parts. 2. Record winding measurement and perform surge test. 3. Record shaft and housing dimensions. 4. Send initial / investigation report with all electrical & mechanical records with clear pictures, mentioning all findings and required jobs, including motor EX nameplate details. 5. In case of winding failure, root cause analysis is required to determine root cause of failure. 6. Clean and inspect all mechanical parts. 7. Sandblast motor body. 8. Supply and fit new bearings. 9. Supply and fit new seals. 10. Add required grease in bearing housing, check grease nipples, and mention type of grease in report. 11. Inspect motor terminal block and lead wires. 12. Clean and bake windings 13. Apply Varnish on all windings. 14. Verify EX integrity and clean flame path as per IECEX standards. 15. Re-assemble the motor. 16. Carry out static test on the motor. 17. Carry out no load test run. 18. Paint the motor exterior 19. Fix new sticker or tag with job details 20. Fully pack the motor

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. RATE AGREEMENT FOR SUPPLY, BOLTS, HEX CAP,SCREWS & NIPPLES To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. ) 2 We undertake if our Tender is accepted to commence the work in accordance within ……. Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. PC.230405.SCM.P026, Rig Move for Xxxxx Xxxx (205 and 210) including Rig Main Camp & Accessories in OQ Block 60 Fields To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you.

ABRAJ STANDARD TERMS & CONDITIONS. Xxxxx’s standard terms and conditions are attached as per Annexure 12 and any deviation to terms and conditions should be specifying in Commercial Bid. Company expressly reserves the right to extend the bid submission deadline. Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. Bidders accept full responsibility for ensuring their Bids are delivered to the email addresses by the specified deadline. Bids submitted to any other email address or later than the deadline may not be considered. MITC.230409.OPS.M046, Rig Move for Xxxxx Xxxx (205 and 210) including Rig Main Camp & Accessories in OQ Block 60 Fields To: Xx-Xxxxxxx, XX Xxx 0000PO Box 1156, XX 000PC 130, XxxxxxAzaiba, Sir/Madam, 1. We have examined the Conditions of Contract, Company’s Requirements, and Xxxxxxx listed hereunder for the above named Works. We have examined, understood and checked these documents and have ascertained that they contain no errors or other defects. We, the undersigned accordingly, offer to execute and completely maintain the whole of the said Works for the prices set out in our Tender. Rials Omani ……………………………………………………………………………………. (R.O ) or such other sum or currency* (………………………………………………………………………………………………….) 2. We undertake if our Tender is accepted to commence the work in accordance within Days of the Contract Conditions and to complete the Works in accordance with the above documents within the time for Completion stated in the Appendix to the Form of Tender. We guarantee that the Works will then conform to the Performance Guarantees included in this Tender. 3. We undertake that if our Tender is accepted we will provide the specified Performance Bond from a locally registered Insurance Company or Bank in accordance with SubClause 2.16 of the above instruction to Bidder to be jointly and severally bound with us in the sum of five percent (5%) of the Contract Price for the due performance of the Contract under the terms of a Performance Bond to be approved by you. 4. We agree to abide by this Tender for a period of 90 days from the date fixed for receiving same and it shall remain binding upon us and may be accepted at any time before the expiration of that period. 5. Until the Contract is prepared and executed this Letter of Tender, together with your written acceptance thereof, shall constitute a binding obligation upon us. 6. We understand that you are not bound to accept the lowest or any tender you may receive. 7. We acknowledge the receipt of the following Circular Letter and Addenda: Reference number of Addenda: Date ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. ……………………………………………………. ……………………………………….. And confirm that we have taken account of same in our Tender. 8. We confirm that we have an Agent/s for the provision of Spare Parts, Maintenance Services and repair who are: Name Address And whose Agency Registration Number is Dated Name Address And whose Agency Registration Number is Dated Abraj Energy Services (AES), since it was founded in May 2006, has taken major strides and has rapidly grown to become a strong player in the Oil and Gas market. AES specializes in Drilling and Oilfield services as well as Well Engineering Solutions. Within few years of its establishment, AES has achieved a remarkable place in the local market providing solutions and services in a safe environment and up to customer satisfaction. Lately Abraj has expanded its operation outside Oman and expected to start operation in Kuwait Xxxxx is issuing this tender for having a rate agreement contract for the Supply of Choke Manifold & Side outlet valves as per the Scope of Work for JO Project and Rigs operating in Oman.