Acceptance and Shortage Claims Sample Clauses

Acceptance and Shortage Claims. All Products are subject to Customer’s inspection (which inspection does not affect the warranties under this Agreement) at the Plant. Customer may reject or cancel all or any part of any Purchase Order if Bottler fails to make the Product available at the Plant on the Ship Date in conformity with the terms and conditions hereof, including any failure of Products to conform to the Specifications due to a fault of Bottler. Customer’s acceptance of non-conforming delivery is not a waiver of its right to reject future deliveries. If Customer rejects some or all Products in a shipment, at Customer’s option, (i) Bottler shall provide a comparable quality substitute (for which substitution Bottler must assume any expense and price differential) or (ii) Customer may purchase Products from another supplier as an alternate source as Customer, in its sole discretion, deems necessary. At any time upon identification and notification of defective Products or nonconforming shipments, Customer may take any of the actions set forth in Section 9(c)(iii). Within one week of notification of such defects, Bottler shall submit to Customer a written explanation of the root cause and necessary corrective actions to prevent reoccurrence. Payment for or passage of title to Products prior to Customer’s inspection does not constitute acceptance. Customer shall report any nonconforming defects or shortages to Bottler within five (5) business days after receipt at the Delivery Destination. Bottler shall correct shortages at no additional cost to Customer. Customer shall be deemed to have waived any right of rejection or remedy for any Products with nonconforming defects or shortages that are not reported within five (5) business days after receipt of the Products at the Delivery Destination.
AutoNDA by SimpleDocs

Related to Acceptance and Shortage Claims

  • Acceptance and Rejection Jubilant shall be entitled to reject any shipment of Products that fails to conform to the Product Specifications or Packaging Specifications at the time of delivery to Jubilant. Jubilant shall notify Cadista of such rejection within thirty (30) days after delivery of such Products shipment to Jubilant, and shall set forth in such notification the basis under this Agreement for such rejection, including any testing or inspection results, provided, however, that in the event any such non-conformity is latent or was not obvious and could not be readily discovered from a physical inspection of the Products shipment, Jubilant may give written notice to Cadista of its rejection of such shipment within thirty (30) days after Jubilant's discovery of such non-conformance. Failure to so notify Cadista, or failure to identify the basis under this Agreement for rejection of any Product, shall constitute acceptance of such Product, except to the extent the Product fails to conform to the Product Specifications or Packaging Specifications as the case may be. After such failure to notify, Jubilant shall be obligated to make payment for such Product in accordance with pricing provisions of this Agreement. If the parties disagree as to whether any Product meets the Product Specifications or Packaging Specifications and the parties are unable to negotiate a commercially reasonable resolution, then samples and/or batch records, as appropriate, from the disputed shipment shall promptly be submitted for testing and evaluation to an independent Third Party as shall be agreed to in writing by both parties. The determination of such Third Party as to whether the disputed Product shipment meets the Product Specifications or Packaging Specifications shall be final and binding. The cost of the testing and evaluation by the independent third party shall be borne by the party whose position is found to be erroneous. If, pursuant to this Section 3.2, any Products are found not to conform to the Product Specifications or Packaging Specifications, as a result of a cause occurring prior to placement thereof with the carrier (and not arising as a result of the Materials being defective or failing to meet their respective specifications), at Cadista’s option, Jubilant shall either (i) deliver such non-conforming Products to Cadista or (ii) destroy such non-conforming Products in accordance with applicable laws, rules and regulations. Cadista shall reimburse Jubilant for all reasonable costs and expenses in connection such delivery or destruction, and, at Cadista’s option and as Jubilant’s exclusive remedy, Cadista shall either: (i) credit Jubilant for the amount paid or payable by Jubilant to Cadista for such rejected Product shipment (and reimburse Jubilant for the Material of such rejected batch at Jubilant’s cost for such Materials), or (ii) replace such rejected Product shipment (with Cadista paying Jubilant for all Materials or such replacement shipment in an amount equal to Jubilant’s cost), at no additional cost to Jubilant, as promptly as reasonably practicable, but in no event later than forty-five (45) days from receipt of notice of non-conformity of such shipment from Jubilant. Jubilant shall notify Cadista in writing of any claim relating to quantitative deficiencies in any shipment of Product that Jubilant considers to have been caused prior to shipment hereunder within thirty (30) days following receipt of any such shipment. Any claim for a quantitative deficiency which is not made within such thirty (30) days shall be deemed to have been waived by Jubilant and Jubilant shall be obligated to make payment for such Product in accordance with Section 5 of this Agreement. In the event Jubilant determines there is a quantitative deficiency from the applicable shipping documentation, the parties shall investigate such deficiency and, if the parties agree that such deficiency occurred prior to shipment, Cadista shall, at Jubilant’s option and as Jubilant’s exclusive remedy for such quantitative deficiency, (a) credit Jubilant for the amount paid by Jubilant to Cadista in excess of the aggregate price for actual quantities shipped; or (b) subject to Cadista having Product on hand at the time of request by Jubilant, rectify any such deficiency by promptly shipping the appropriate quantities of any relevant Product to Jubilant, but in no event later than fifteen (15) calendar days following the occurrence of such a deficiency, in which case Jubilant shall be obligated to pay for any such quantities pursuant to Section 5 of this Agreement.

  • Acceptance; Rejection A holder of Notes may accept the offer to prepay made pursuant to this Section 8.3 by causing a notice of such acceptance to be delivered to the Company not later than 15 days after receipt by such holder of the most recent offer of prepayment. A failure by a holder of Notes to respond to an offer to prepay made pursuant to this Section 8.3 shall be deemed to constitute a rejection of such offer by such holder.

  • Final Working Drawings After the Final Space Plan has been approved by Landlord, Tenant shall supply the Engineers with a complete listing of standard and non-standard equipment and specifications, including, without limitation, B.T.U. calculations, electrical requirements and special electrical receptacle requirements for the Premises, to enable the Engineers and the Architect to complete the “Final Working Drawings” (as that term is defined below) in the manner as set forth below. Upon the approval of the Final Space Plan by Landlord and Tenant, Tenant shall promptly cause the Architect and the Engineers to complete the architectural and engineering drawings for the Premises, and Architect shall compile a fully coordinated set of architectural, structural, mechanical, electrical and plumbing working drawings in a form which is complete to allow subcontractors to bid on the work and to obtain all EXHIBIT B applicable permits (collectively, the “Final Working Drawings”) and shall submit the same to Landlord for Landlord’s approval. Tenant shall supply Landlord with four (4) copies signed by Tenant of such Final Working Drawings. Landlord shall advise Tenant within five (5) business days after Landlord’s receipt of all of the Final Working Drawings, either (i) approve the Final Working Drawings, (ii) approve the Final Working Drawings subject to specified conditions, which conditions must be stated in a reasonably clear and complete manner, and shall only be conditions reasonably intended to address a potential Design Problem, or (iii) disapprove and return the Construction Drawings to Tenant with requested revisions; provided, however, Landlord shall only disapprove such Final Working Drawings to the extent of a Design Problem. If Landlord disapproves the Final Working Drawings, Tenant may resubmit the Final Working Drawings to Landlord at any time, and Landlord shall approve or disapprove the resubmitted Final Working Drawings, based upon the criteria set forth in this Section 3.3, within three (3) business days after Landlord receives such resubmitted Final Working Drawings. Such procedure shall be repeated until the Final Working Drawings are approved.

  • Acceptance Testing The MCP must have the capability to report all elements in the Minimum Data Set as set forth in the ODJFS Encounter Data Specifications and must submit a test file in the ODJFS-specified medium in the required formats prior to contracting or prior to an information systems replacement or update. Acceptance testing of encounter data is required as specified in Section 29(a)(v) of this Appendix.

  • Acceptance Procedure Lessor hereby authorizes one or more employees of the related Lessee, to be designated by such Lessee, as the authorized representative or representatives of Lessor to accept delivery on behalf of Lessor of that Leased Property identified on the applicable Funding Request. Each Lessee hereby agrees that such acceptance of delivery by such authorized representative or representatives and the execution and delivery by such Lessee on each Closing Date for property to be leased hereunder of a Lease Supplement in substantially the form of Exhibit A hereto (appropriately completed) shall, without further act, constitute the irrevocable acceptance by such Lessee of that Leased Property which is the subject thereof for all purposes of this Lease and the other Operative Documents on the terms set forth therein and herein, and that such Leased Property, together with, in the case of Land, any Building or other improvements thereon or to be constructed thereon pursuant to the Construction Agency Agreement, shall be deemed to be included in the leasehold estate of this Lease and shall be subject to the terms and conditions of this Lease as of such Closing Date. The demise and lease of each Building pursuant to this Section 2.2 shall include any additional right, title or interest in such Building which may at any time be acquired by Lessor, the intent being that all right, title and interest of Lessor in and to such Building shall at all times be demised and leased to the related Lessee hereunder.

  • Construction Contract; Cost Budget Prior to execution of a construction contract, Tenant shal] submit a copy of the proposed contract with the Contractor for the construction of the Tenant Improvements, including the genera] conditions with Contractor (the “Contract”) to Landlord for its approval, which approval shall not be unreasonably withheld, conditioned or delayed. Following execution of the Contract and prior to commencement of construction, Tenant shall provide Landlord with a fully executed copy of the Contract for Landlord’s records. Prior to the commencement of the construction of the Tenant Improvements, and after Tenant has accepted all bids and proposals for the Tenant Improvements, Tenant shall provide Landlord with a detailed breakdown, by trade, for all of Tenant’s Agents, of the final estimated costs to be incurred or which have been incurred in connection with the design and construction of the Tenant Improvements to be performed by or at the direction of Tenant or the Contractor (the “Construction Budget”), which costs shall include, but not be limited to, the costs of the Architect’s and Engineers’ fees and the Landlord Coordination Fee. The amount, if any, by which the total costs set forth in the Construction Budget exceed the amount of the Tenant Improvement Allowance is referred to herein as the “Over Allowance Amount”. In the event that an Over-Allowance Amount exists, then prior to the commencement of construction of the Tenant Improvements, Tenant shall supply Landlord with cash in an amount equal to the Over- Allowance Amount. The Over-Allowance Amount shall be disbursed by Landlord prior to the disbursement of any of the then remaining portion of the Tenant Improvement Allowance, and such disbursement shall be pursuant to the same procedure as the Tenant Improvement Allowance. In the event that, after the total costs set forth in the Construction Budget have been delivered by Tenant to Landlord, the costs relating to the design and construction of the Tenant Improvements shall change, any additional costs for such design and construction in excess of the total costs set forth in the Construction Budget shall be added to the Over-Allowance Amount and the total costs set forth in the Construction Budget, and such additional costs shall be paid by Tenant to Landlord immediately as an addition to the Over-Allowance Amount or at Landlord’s option, Tenant shall make payments for such additional costs out of its own funds, but Tenant shall continue to provide Landlord with the documents described in items (1), (ii), (iii) and (iv) of Section 2.2.2.1 of this Tenant Work Letter, above, for Landlord’s approval, prior to Tenant paying such costs. All Tenant Improvements paid for by the Over-Allowance Amount shall be deemed Landlord’s property under the terms of the Lease. 4.2.2

  • Rejection State Street reserves the right to decline to process or delay the processing of a payment order which (a) is in excess of the collected balance in the account to be charged at the time of State Street's receipt of such payment order; (b) if initiating such payment order would cause State Street, in State Street's sole judgment, to exceed any volume, aggregate dollar, network, time, credit or similar limits upon wire transfers which are applicable to State Street; or (c) if State Street, in good faith, is unable to satisfy itself that the transaction has been properly authorized.

  • Quality Control A. Controlled Affiliate agrees to use the Licensed Marks and Name only in connection with the licensed services and further agrees to be bound by the conditions regarding quality control shown in attached Exhibit A as they may be amended by BCBSA from time-to-time.

  • Commissioning preparation of a system or systems to allow hydrocarbons or other process fluids to be safely introduced into the system or systems for processing. In this phase testing will focus on systems, including utilities.

  • Facility Type    Call Sign    Exp Date TV Broadcast Station License WBRE-TV 08/01/2007 (Channel 28, Xxxxxx-Xxxxx, Pennsylvania) DTV Facility WBRE-DT 08/01/2007 (Channel 11, Xxxxxx-Xxxxx, Pennsylvania) TV Translator Station License W24BL 08/01/2007 TV Translator Station License W30AN 08/01/2007 TV Translator Station License W51BP 08/01/2007 TV Translator Station License W64AL 08/01/2007 Transmit-Only Earth Station License E910642 11/01/2011 Transmit-Receive Earth Station License E020058 05/03/2017 TV Pickup KA35201 08/01/2007 TV Pickup KA35245 08/01/2007 TV Pickup KA74870 08/01/2007 TV Pickup KC62824 08/01/2007 Broadcast Auxiliary KF5726 08/01/2007 TV Studio Transmitter Link KGH66 08/01/2007 R/P Base Mobile System KGU973 08/01/2007 TV Pickup KK4138 08/01/2007 TV Pickup KL2535 08/01/2007 TV Pickup KP4407 08/01/2007 R/P Base Mobile System KQB618 08/01/2007 TV Pickup KR7688 08/01/2007 TV Pickup KR7693 08/01/2007 TV Pickup KR7771 08/01/2007 TV Pickup KS2001 08/01/2007 TV Pickup KY2899 08/01/2007 R/P Mobile KY5608 08/01/2007 TV Studio Transmitter Link KZO21 08/01/2007 TV Intercity Relay WFW575 08/01/2007 TV Intercity Relay WGI290 08/01/2007 TV Intercity Relay WHB674 08/01/2007 TV Intercity Relay WLI324 08/01/2007 TV Intercity Relay WLI325 08/01/2007 TV Intercity Relay WLI337 08/01/2007 TV Intercity Relay WMF322 08/01/2007 TV Intercity Relay WMF323 08/01/2007

Time is Money Join Law Insider Premium to draft better contracts faster.