Flexibility 7.1 The Employer and an Employee covered by this Schedule may agree to make an individual flexibility arrangement to vary the effect of terms of this Schedule if:
7.1.1 the agreement deals with 1 or more of the following matters:
(i) arrangements about when work is performed - such arrangements may be made to vary the operation of clause 24 Hours of Work;
(ii) Salary Packaging – an employee may elect a salary packaging arrangement in accordance with clause 21 of this Schedule; and
7.1.2 the arrangement meets the genuine needs of the Employer and Employee in relation to 1 or more of the matters mentioned in 7.1.1; and
7.1.3 the arrangement is genuinely agreed to by the Employer and Employee.
7.2 The Employer must ensure that the terms of the individual flexibility arrangement:
(i) are about permitted matters under section 172 of the Fair Work Act 2009; and
(ii) are not unlawful terms under section 194 of the Fair Work Act 2009; and
(iii) result in the Employee being better off overall than the Employee would be if no arrangement was made.
7.3 The Employer must ensure that the individual flexibility arrangement:
7.3.1 is in writing; and
7.3.2 includes the name of the Employer and Employee; and
7.3.3 is signed by the Employer and Employee and if the Employee is under 18 years of age, signed by a parent or guardian of the Employee; and
7.3.4 includes details of:
(i) the terms of the Schedule that will be varied by the arrangement; and
(ii) how the arrangement will vary the effect of the terms; and
(iii) how the Employee will be better off overall in relation to the terms and conditions of his or her employment as a result of the arrangement; and
7.3.5 states the day on which the arrangement commences.
7.4 The Employer must give the Employee a copy of the individual flexibility arrangement within 14 days after it is agreed to.
7.5 The Employer or Employee may terminate the individual flexibility arrangement:
7.5.1 by giving no more than 28 days written notice to the other party to the arrangement; or
7.5.2 if the Employer and Employee agree in writing — at any time.
Agreement Flexibility 8.1 An employer and employee covered by this enterprise agreement may agree to make an individual flexibility arrangement to vary the effect of terms of the agreement if:
(a) the agreement deals with 1 or more of the following matters:
(i) arrangements about when work is performed;
(ii) overtime rates;
(iii) penalty rates;
(iv) allowances;
(v) leave loading; and
(b) the arrangement meets the genuine needs of the employer and employee in relation to 1 or more of the matters mentioned in paragraph (a); and
(c) the arrangement is genuinely agreed to by the employer and employee.
8.2 The employer must ensure that the terms of the individual flexibility arrangement:
(a) are about permitted matters under section 172 of the Fair Work Act 2009; and
(b) are not unlawful terms under section 194 of the Fair Work Act 2009; and
(c) result in the employee being better off overall than the employee would be if no arrangement was made.
8.3 The employer must ensure that the individual flexibility arrangement:
(a) is in writing; and
(b) includes the name of the employer and employee; and
(c) is signed by the employer and employee and if the employee is under 18 years of age, signed by a parent or guardian of the employee; and
(d) includes details of:
(i) the terms of the enterprise agreement that will be varied by the arrangement; and
(ii) how the arrangement will vary the effect of the terms; and
(iii) how the employee will be better off overall in relation to the terms and conditions of his or her employment as a result of the arrangement; and
(e) states the day on which the arrangement commences.
8.4 The employer must give the employee a copy of the individual flexibility arrangement within 14 days after it is agreed to.
8.5 The employer or employee may terminate the individual flexibility arrangement:
(a) by giving no more than 28 days written notice to the other party to the arrangement; or
(b) if the employer and employee agree in writing—at any time.
WORKPLACE FLEXIBILITY The employer must ensure that any Individual Flexibility Agreement (IFA) is genuinely agreed to by the employer and the employee and result in the employee being better off overall at the time the IFA is made than the employee would have been if no IFA had been agreed to.
8.1 Notwithstanding any other provision of the Agreement, the employer and an individual employee may agree to vary the application of certain terms of the Agreement to meet the genuine individual needs of the employer and the individual employee. The terms the employer and the individual employee may agree to vary are the application of those permitted under Section 172 of the FW Act, and relates only to:-
8.1.1 arrangements for when work is performed;
8.1.2 salary sacrifice arrangements;
8.1.3 reduction in ordinary hours; and
8.1.4 are not unlawful terms under Section 194 of the FW Act.
8.2 The employer and the individual employee must have genuinely made the IFA without coercion or duress. An IFA can only be entered into after the individual employee has commenced employment with the employer.
8.3 The IFA between the employer and the individual employee must:
8.3.1 be confined to a variation in the application of one or more of the terms listed in Clause 8.1; and
8.4 The IFA between the employer and the individual employee must also:
8.4.1 be in writing, name the parties to the IFA and be signed by the employer and the individual employee and, if the employee is under eighteen (18) years of age, the employee’s parent or guardian;
8.4.2 state each term of the Agreement that the employer and the individual employee have agreed to vary;
8.4.3 detail how the application of each term has been varied by agreement between the employer and the individual employee;
Visibility 1. Unless the Council of Europe requests or agrees otherwise, the Grantee shall take all necessary measures to publicise the fact that the Action has been funded within the framework of a Joint Project between the European Union and the Council of Europe. Information given to the press and to the beneficiaries of the Action, all related publicity material, official notices, reports and publications, shall acknowledge that the Action was carried out with a grant from a Joint Project between the European Union and the Council of Europe and shall display in an appropriate way the Joint Projects’ visual identity (for instructions on use of the Joint Projects’ visual identity, see Appendix IV).
2. In cases where equipment or major items have been purchased using funds provided by the European Union or the Council of Europe, the Grantee shall indicate this clearly on that equipment and those major items (including display of the European Union and Council of Europe’s logos), provided that such actions do not jeopardise the safety and security of the Grantee’s staff.
3. The acknowledgement and Joint Projects’ visual identity shall be clearly visible in a manner that will not create any confusion regarding the identification of the Acton as a project of the Grantee and the ownership of the equipment and items by the Grantee.
4. All publications by the Grantee pertaining to the Action that have received funding from a Joint Project between the European Union and the Council of Europe, in whatever form and whatever medium, including the Internet, shall carry the following or a similar disclaimer: “This document has been produced using funds of a Joint Project between the European Union and the Council of Europe. The views expressed herein can in no way be taken to reflect the official opinion of the European Union or the Council of Europe”.
5. If the equipment purchased with a grant from a Joint Project is not transferred to the local partners of the Grantee or to the final recipient of the Action at the end of the implementation period of this Agreement, the visibility requirements as regards this equipment shall continue to apply between the end of the implementation period of this Agreement and the end of the Joint Project, if the latter lasts longer.
6. All layouts of any communication items prepared by the Grantee are subject to approval with the Contact point within the Council of Europe.
7. The Grantee accepts that the European Union and the Council of Europe may publish in any form and medium, including on their websites, the name and address of the Grantee, the purpose and amount of the grant and, if relevant, the percentage of co-financing.
Employability Executive acknowledges (i) that Executive has sufficient abilities and talents to be able to obtain, upon the termination of Executive’s employment, comparable employment from another business while fully honoring and complying with the above covenants concerning confidential information and contacts with the Company’s or any of its Affiliates’ customers or employees, and (ii) the importance to the Company and its Affiliates of the above covenants. Accordingly, for a period of one (1) year following the termination of Executive’s employment with the Company and upon the Company’s reasonable request of Executive, Executive shall advise the Company of the identity of Executive’s new employer and shall provide a general description, in reasonable detail, of Executive’s new duties and responsibilities sufficient to inform the Company of its need to request a court order to enforce the above covenants.
Constructability Review Prepare detailed interdisciplinary constructability review within Fourteen (14) days of receipt of the plans from the District that:
10.1.2.1.6.1 Ensures construction documents are well coordinated and reviewed for errors;
10.1.2.1.6.2 Identifies to the extent known, construction deficiencies and areas of concern;
10.1.2.1.6.3 Back-checks design drawings for inclusion of modifications; and
10.1.2.1.6.4 Provides the District with written confirmation that:
10.1.2.1.6.4.1 Requirements noted in the design documents prepared for the Project are consistent with and conform to the District's Project requirements and design standards.
10.1.2.1.6.4.2 Various components have been coordinated and are consistent with each other so as to minimize conflicts within or between components of the design documents.
Capabilities A. The Parties agree that the DRE must possess the legal, technical, and financial capacity to:
(1) Accept and expend non-federal funds consistent with Section 4.2.4;
(2) Accept transfer of the FERC license and title for the Facilities from PacifiCorp;
(3) Seek and obtain necessary permits and other authorizations to implement Facilities Removal;
(4) Enter into appropriate contracts and grant agreements for effectuating Facilities Removal;
(5) Perform, directly or by oversight, Facilities Removal;
(6) Prevent, mitigate, and respond to damages the DRE or any of its contractors, subcontractors, or assigns cause during the course of Facilities Removal, and, consistent with Applicable Law, respond to and defend associated liability claims against the DRE or any of its contractors, subcontractors, or assigns, including costs thereof and any judgments or awards resulting therefrom;
(7) Carry the required insurance and bonding set forth in Appendix L to respond to liability and damages claims associated with Facilities Removal against the DRE or any of its contractors, subcontractors, or assigns;
(8) Meet the deadlines set forth in Exhibit 4; and
(9) Perform such other tasks as are reasonable and necessary for Facilities Removal.
B. Before the DRE and PacifiCorp file the joint application to transfer the license for the Facilities, the DRE will Timely demonstrate to the reasonable satisfaction of the States and PacifiCorp that it possesses the legal, technical, and financial capacity to accomplish the tasks in Sections 7.1.2.A(1) through (5), (8), and (9). PacifiCorp and the States will consult if the DRE fails to make the demonstration required in this subsection.
C. Within six months of the DRE’s execution of the Settlement, the DRE will include in an informational filing in the FERC license transfer proceeding proof that it possesses the legal, technical, and financial capacity to accomplish the tasks in Sections 7.1.2.A(6) and (7). This filing will include documentation that the DRE meets the requirements of Parts II, III, and IV of Appendix L and is capable of fulfilling its obligations under Section 7.1.3. The DRE will not provide the filing if either of the States or PacifiCorp objects to the filing after a reasonable opportunity to review before submission to FERC. The six-month deadline may be changed by agreement of the DRE, the States, and PacifiCorp. The Parties will Meet and Confer if the DRE fails to provide the informational filing to FERC.
Local Circuit Switching Capability, including Tandem Switching Capability 4.1.3.1 Definition
4.1.3.2 Notwithstanding BellSouth’s general duty to unbundle local circuit switching, BellSouth shall not be required to unbundle local circuit switching for <<customer_name>> when <<customer_name>> serves end-users with four (4) or more voice-grade (DS-0) equivalents or lines in locations served by BellSouth’s local circuit switches, which are in the following MSAs: Atlanta, GA; Miami, FL; Orlando, FL; Ft. Lauderdale, FL; Charlotte-Gastonia-Rock Hill, NC; Greensboro-Winston Salem-High Point, NC; Nashville, TN; and New Orleans, LA, and BellSouth has provided non-discriminatory cost based access to the Enhanced Extended Link (EEL) throughout Density Zone 1 as determined by NECA Tariff No. 4 as in effect on January 1, 1999.
4.1.3.3 In the event that <<customer_name>> orders local circuit switching for a single end user account name at a single physical end user location with four (4) or more 2-wire voice-grade loops from a BellSouth central office in an MSA listed above, BellSouth shall charge <<customer_name>> the market based rate in Exhibit C for use of the local circuit switching functionality for the affected facilities.
4.1.3.4 A featureless port is one that has a line port, switching facilities, and an interoffice port. A featured port is a port that includes all features then capable or a number of then capable features specifically requested by <<customer_name>>. Any features that are not currently then capable but are technically feasible through the switch can be requested through the NBR/BFR process.
4.1.3.5 BellSouth will provide to <<customer_name>> customized routing of calls: (i) to a requested directory assistance services platform; (ii) to an operator services platform pursuant to Section 10 of Attachment 2; (iii) for <<customer_name>>’s PIC’ed toll traffic in a two (2) PIC environment to an alternative OS/DA platform designated by <<customer_name>>. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers.
4.1.3.6 Remote Switching Module functionality is included in Switching Capability. The switching capabilities used will be based on the line side features they support.
4.1.3.7 Switching Capability will also be capable of routing local, intraLATA, interLATA, and calls to international customer’s preferred carrier; call features (e.g. call forwarding) and Centrex capabilities.
4.1.3.8 Where required to do so in order to comply with an effective Commission order, BellSouth will provide to <<customer_name>> purchasing local BellSouth switching and reselling BellSouth local exchange service under Attachment 1, selective routing of calls to a requested directory assistance services platform or operator services platform. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers, but obtain a <<customer_name>> branded service.
Individual Flexibility Arrangement 12.1 The Employer and an Employee covered by this Agreement, may agree to make an Individual Flexibility Arrangement to vary the following terms of this Agreement if:
(a) the arrangement deals with one or more of the following matters:
(i) arrangements about where and when work is performed;
(ii) overtime rates;
(iii) penalty rates;
(iv) allowances; or
(v) annual leave loading;
(b) the arrangement must meet the genuine needs of the Employer and Employee in relation to one or more of the matters mentioned in subclause 14.1 (a); and
(c) the arrangement is genuinely agreed to by the Employer and the Employee.
12.2 The Employer must ensure that the terms of the Individual Flexibility Arrangement:
(a) are about permitted matters under section 172 of the Act;
(b) are not unlawful terms under section 194 of the Act;
(c) result in the Employee being better off overall than the Employee would be if no agreement was made.
12.3 The Employer must ensure that the Individual Flexibility Arrangement:
(a) is in writing;
(b) includes the name of the Employer and the Employee;
(c) is signed by the Employer and the Employee, and if the Employee is under 18 years of age, signed by a parent or guardian of the Employee;
(d) Includes details of:
(i) the terms of the Agreement that will be varied by the arrangement;
(ii) how the arrangement will vary the effect of the terms;
(iii) how the Employee will be better off overall in relation to the terms and conditions of their employment as a result of the arrangement; and
(e) states the day on which the arrangement commences;
12.4 The Employer must give the Employee a copy of the Individual Flexibility Arrangement within 14 days after it is agreed to.
12.5 The Employer or Employee may terminate the Individual Flexibility Arrangement;
(a) by giving no more than 28 days written notice to the other party to the arrangement; or
(b) if the Employer and the Employee agree in writing – at any time.
Testing Capabilities 7.2.2.10.2.1 LIS Acceptance Testing is provided where equipment is available, with the following test lines: seven-digit access to balance (100 type), milliwatt (102 type), nonsynchronous or synchronous, automatic transmission measuring (105 type), data transmission (107 type), loop-around, short circuit, open circuit, and non-inverting digital loop-back (108 type), and such other acceptance testing that may be needed to ensure that the service is operational and meets the applicable technical parameters.
7.2.2.10.2.2 In addition to LIS acceptance testing, other tests are available (e.g., additional cooperative acceptance testing, automatic scheduled testing, cooperative scheduled testing, manual scheduled testing, and non-scheduled testing). Charges for such testing are identified in Section 7.3.5.
