Manufacturing Services Jabil will manufacture the Product in accordance with the Specifications and any applicable Build Schedules. Jabil will reply to each proposed Build Schedule that is submitted in accordance with the terms of this Agreement by notifying Company of its acceptance or rejection within three (3) business days of receipt of any proposed Build Schedule. In the event of Jabil’s rejection of a proposed Build Schedule, Jabil’s notice of rejection will specify the basis for such rejection. When requested by Company, and subject to appropriate fee and cost adjustments, Jabil will provide Additional Services for existing or future Product manufactured by Jabil. Company shall be solely responsible for the sufficiency and adequacy of the Specifications [***].
Bidder Supplied Samples The Commissioner reserves the right to request from the Bidder/Contractor a representative sample(s) of the Product offered at any time prior to or after award of a contract. Unless otherwise instructed, samples shall be furnished within the time specified in the request. Untimely submission of a sample may constitute grounds for rejection of Bid or cancellation of the Contract. Samples must be submitted free of charge and be accompanied by the Bidder’s name and address, any descriptive literature relating to the Product and a statement indicating how and where the sample is to be returned. Where applicable, samples must be properly labeled with the appropriate Bid or Contract reference. A sample may be held by the Commissioner during the entire term of the Contract and for a reasonable period thereafter for comparison with deliveries. At the conclusion of the holding period the sample, where feasible, will be returned as instructed by the Bidder, at the Bidder’s expense and risk. Where the Bidder has failed to fully instruct the Commissioner as to the return of the sample (i.e., mode and place of return, etc.) or refuses to bear the cost of its return, the sample shall become the sole property of the receiving entity at the conclusion of the holding period.
PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.
Contracted Services PPG and Member Physicians shall render Contracted Services which are not PPG Capitated Services to Members covered under this Addendum B and shall be compensated on a fee-for-service basis at the rates set forth in Addendum E. PPG shall submit claims in accordance with the terms of this Agreement and State and federal law.
Product Supply 5.1 In the event that Eisai notifies Radius of its desire to purchase bulk substance of Compound from Radius, Radius shall supply Eisai with all amount of such bulk substance of Compound, which meets specifications for the Product determined by Radius in the course of its Development activities pursuant to this Agreement, required by Eisai for commercial sales of Product in Japan With respect to Eisai clinical development activities for Product in Japan, upon Eisai’s request, Radius shall supply Eisai the bulk substance of Compound for * Confidential Treatment Requested by the Registrant. Redacted Portion Filed Separately with the Commission. the conduct of the Eisai Development activities in the amounts and at the times determined by the SC, having reference to the quantity of the bulk substance of Compound required for clinical trials in Japan. Radius shall charge [*] for applicable bulk substance of Compound. Radius shall ship such bulk substance of Compound, FOB point of manufacturing.
5.2 In the event that Eisai notifies Radius of its desire to purchase Semi-Product from Radius which meets specifications determined by Radius in the course of its Development activities pursuant to this Agreement, Radius shall supply Eisai with all amount of Semi-Product required by Eisai for commercial sales of Product in Japan. With respect to Eisai clinical development activities for Product in Japan, upon Eisai’s request, Radius shall supply Eisai Semi-Product for the conduct of the Eisai Development activities in the amounts and at the times determined by the SC, having reference to the quantity of Semi-Product required for clinical trials in Japan. Radius shall charge [*] for Semi-Product. Radius shall ship such Semi-Product, FOB point of manufacturing.
5.3 The Parties agree that they shall, in good faith, discuss, negotiate and execute necessary agreements containing mutually acceptable terms, including but not limited to, a supply agreement for either bulk substance of Compound or Semi-Product as well as a quality control agreement of either bulk substance of Compound or Semi-Product, in the event that Eisai notifies Radius as set forth in Article 5.1 or 5.2.
5.4 As manufacturer of the Product, Radius shall be responsible for: (a) the control of the quality of the Product promoted and sold under the Radius trademarks; as provided in Article 2.3; and (b) ensuring that all bulk substance of Compound or Semi-Product supplied to Eisai pursuant to this Article 5 shall be manufactured in accordance with the applicable good manufacturing practices (GMP) and shall meet the then applicable specifications for the bulk substance of Compound or Semi-Product; and Radius warrants that all bulk substance of Compound or Semi-Product supplied to Eisai pursuant to this Article 5 shall be manufactured in accordance with the applicable GMP and * Confidential Treatment Requested by the Registrant. Redacted Portion Filed Separately with the Commission. shall meet the then applicable specifications for the bulk substance of Compound or Semi-Product and will be free from defects in material and workmanship. Radius shall resolve any product liability issues in the Territory relating to the Product and shall resolve any product liability issues in Japan relating to the Product or the bulk substance of Compound or Semi-Product, as the case may be, supplied to Eisai pursuant to this Article 5 in the event and to the extent related to a breach of the warranty set forth in Article 5.4(b) at its own expense and subject to Article 5.5.
5.5 Radius’ obligations with respect to product liability in the Territory and Japan shall include the following responsibilities, each to be taken at Radius’ expense:
(a) Radius shall report, at its expense, to appropriate authorities, in accordance with local requirements, all adverse events related to use of the Product in the Territory or Japan. Eisai shall provide to Radius, upon Radius’ request, reasonable assistance in connection with the reporting of all of adverse events, responding to safety queries and assessing safety issues, in each case, to the extent related to the Product in Japan. Adverse events shall be recorded in a single, centralized database, which shall be held and owned by Radius. Radius will provide, upon request by Eisai, any safety information in Radius’ control and reasonably required by Eisai in connection with the development and commercialization of the Product in Japan and all reasonable assistance in responding to safety queries related to the Product and in assessing safety issues related to the Product in Japan. Details of safety reporting activities relating to the Product will be addressed in a pharmacovigilance contract, which the Parties shall enter into after the Effective Date.
(b) In the event that (i) Radius determines that an event, incident, or circumstance may result in the need for a recall or other removal of the Product or any lot or lots thereof from the market; (ii) any regulatory authority in the Territory threatens to remove a Product from the market; or (iii) any regulatory authority in the Territory requires distribution of a “Dear Doctor” letter or its equivalent regarding the use of Product, Radius shall promptly advise Eisai in writing, and shall provide Eisai with copies of all relevant correspondence, notices and the like. Notwithstanding anything the contrary herein, Radius shall have final authority to make all decisions relating to any recall, market withdrawal or other corrective action with respect to the Product in the Territory. After establishing SC pursuant to Article 3.5, all decisions relating to any recall, market withdrawal or other corrective action with respect to the Product shall be decided by the SC as set forth in Article 3.6; provided that in the event that the Parties take different positions with respect to recall, market withdrawal or other corrective action with respect to the Product, then Radius shall have the right to cease supplying bulk substance of Compound or Semi-Product to Eisai for Japan if, after good faith discussions with Eisai, Radius reasonably believes that that continued supply to Eisai exposes Radius to liability as a result of its decision with respect to the Territory. If Radius elects to cease supply, it will terminate supply in an orderly manner, as soon as practical and in accordance with a schedule agreed to by Eisai and Radius. In the event of a recall, market withdrawal or other corrective action with respect to the Product in Japan, and at Radius’ request, Eisai shall provide reasonable assistance to Radius, at Radius’ cost and expense, in conducting any such recall, market withdrawal or other corrective action with respect to the Product in Japan.
5.6 THE WARRANTY IN SECTION 5.4(b) IS IN LIEU OF ANY OTHER WARRANTY WITH RESPECT TO THE PRODUCT, BULK SUBSTANCE OF COMPOUND OR SEMI-PRODUCT SUPPLIED BY RADIUS HEREUNDER, WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE).
Additional Products and Services Subject to the allocation of funds, the CPO may add similar equipment, supplies, services, or locations, within the scope of this Agreement, to the list of equipment, supplies, services, or locations to be performed or provided by giving written notification to Contractor. For purposes of this Section, the “Effective Date” means the date specified in the notification from the CPO. As of the Effective Date, each item added is subject to this Agreement, as if it had originally been a part, but the charge for each item starts to accrue only on the Effective Date. In the event the additional equipment, supplies, services, or locations are not identical to the items(s) already under this Agreement, the charges therefor will then be Contractor’s normal and customary charges or rates for the equipment, supplies, services, or locations classified in the Fees and Costs (Exhibit “F”).
ODUF Packing Specifications 6.3.1 A pack will contain a minimum of one message record or a maximum of 99,999 message records plus a pack header record and a pack trailer record. One transmission can contain a maximum of 99 packs and a minimum of one pack.
Product Specific Terms these terms apply to specific Products referenced in this section.
Loss Leader; Recycled Products Contractor shall not sell or use any article or product as a “loss leader” as defined in Section 17030 of the Business and Professions Code. If Contractor will sell to the Judicial Council, or use in the performance of this Agreement, goods specified in PCC 12207 (for example, certain paper products, office supplies, mulch, glass products, lubricating oils, plastic products, paint, antifreeze, tires and tire-derived products, and metal products), then with respect to those goods: (i) Contractor shall use recycled products in the performance of this Agreement to the maximum extent doing so is economically feasible, and (ii) upon request, Contractor shall certify in writing under penalty of perjury, the minimum, if not exact, percentage of post consumer material as defined in the PCC 12200, in such goods regardless of whether the goods meet the requirements of PCC 12209.
Packing Specifications 7.3.1 A pack will contain a minimum of one message record or a maximum of 99,999 message records plus a pack header record and a pack trailer record. One transmission can contain a maximum of 99 packs and a minimum of one pack.
