Applications for Payment 9.3.1 At least ten days before the date for each progress payment established in the State- Contractor Agreement, the Contractor shall submit to the Architect an itemized Application for Payment, notarized if required, supported by such data substantiating the Contractor's right to payment as the State or the Architect may require. The application for payment must, at a minimum, reflect retainage and the required waivers of lien and any other support documentation enumerated elsewhere in the Contract Documents. 9.3.2 Unless otherwise provided in the Contract Documents, payments will be made on account of materials or equipment not incorporated in the Work but delivered and suitably stored at the site and, if approved in advance by the State, payments may similarly be made for materials or equipment suitably stored at some other location agreed upon in writing. Payments for materials or equipment stored on or off the site shall be conditioned upon submission by the Contractor of bills of sale or such other procedures satisfactory to the State to establish the State's title to such materials or equipment or otherwise protect the State's interest, including applicable insurance and transportation to the site for those materials and equipment stored off the site. 9.3.3 The Contractor warrants that title to all Work, materials and equipment covered by an Application for Payment will pass to the State either by incorporation in the construction or upon the receipt of payment by the Contractor, whichever occurs first, free and clear of all liens, claims, security interests or encumbrances, hereinafter referred to in this Article 9 as "liens"; and that no Work, materials or equipment covered by an Application for Payment will have been acquired by the Contractor, or by any other person performing Work at the site or furnishing materials and equipment for the Project, subject to an agreement under which an interest therein or an encumbrance thereon is retained by the seller or otherwise imposed by the Contractor or such other person.
Reservations for Registry Operations The following ASCII labels must be withheld from registration or allocated to Registry Operator at All Levels for use in connection with the operation of the registry for the TLD: WWW, RDDS and WHOIS. The following ASCII label must be allocated to Registry Operator at All Levels for use in connection with the operation of the registry for the TLD: NIC. Registry Operator may activate WWW, RDDS and WHOIS in the DNS, but must activate NIC in the DNS, as necessary for the operation of the TLD. None of WWW, RDDS, WHOIS or NIC may be released or registered to any person (other than Registry Operator) or third party. Upon conclusion of Registry Operator’s designation as operator of the registry for the TLD all such withheld or allocated names shall be transferred as specified by ICANN. Registry Operator may self-allocate and renew such names without use of an ICANN accredited registrar, which will not be considered Transactions for purposes of Section 6.1 of the Agreement. Registry Operator may activate in the DNS at All Levels up to one hundred (100) names (plus their IDN variants, where applicable) necessary for the operation or the promotion of the TLD. Registry Operator must act as the Registered Name Holder of such names as that term is defined in the then-current ICANN Registrar Accreditation Agreement (RAA). These activations will be considered Transactions for purposes of Section 6.1 of the Agreement. Registry Operator must either (i) register such names through an ICANN-accredited registrar; or (ii) self-allocate such names and with respect to those names submit to and be responsible to ICANN for compliance with ICANN Consensus Policies and the obligations set forth in Subsections 3.7.7.1 through 3.7.7.12 of the then-current RAA (or any other replacement clause setting out the terms of the registration agreement between a registrar and a registered name holder). At Registry Operator’s discretion and in compliance with all other terms of this Agreement, such names may be released for registration to another person or entity. Registry Operator may withhold from registration or allocate to Registry Operator names (including their IDN variants, where applicable) at All Levels in accordance with Section 2.6 of the Agreement. Such names may not be activated in the DNS, but may be released for registration to another person or entity at Registry Operator’s discretion. Upon conclusion of Registry Operator’s designation as operator of the registry for the TLD, all such names that remain withheld from registration or allocated to Registry Operator shall be transferred as specified by ICANN. Upon ICANN’s request, Registry Operator shall provide a listing of all names withheld or allocated to Registry Operator pursuant to Section 2.6 of the Agreement. Registry Operator may self-allocate and renew such names without use of an ICANN accredited registrar, which will not be considered Transactions for purposes of Section 6.1 of the Agreement.
DHS Seal, Logo, and Flags The Contractor shall not use the Department of Homeland Security (DHS) seal(s), logos, crests, or reproductions of flags or likeness of DHS agency officials without specific FEMA pre-approval.
CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
Variation of order of application The Agent may, with the authorisation of the Majority Lenders and the Swap Bank, by notice to the Borrowers, the Security Parties and the other Creditor Parties provide for a different manner of application from that set out in Clause 17.1 either as regards a specified sum or sums or as regards sums in a specified category or categories.
CLEC to CLEC Conversions for Unbundled Loops 2.1.10.1 The CLEC to CLEC conversion process for unbundled Loops may be used by Lightyear when converting an existing unbundled Loop from another CLEC for the same end user. The Loop type being converted must be included in Lightyear’s Interconnection Agreement before requesting a conversion. 2.1.10.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same end user location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.10.3 The Loops converted to Lightyear pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Attachment for the specific Loop type. Order Coordination (OC) Order Coordination – Time Specific (OC-TS) Test Points DLR Charge for Dispatch and Testing if No Trouble Found SL-1 (Non- Designed) Chargeable Option Chargeable Option Not available Chargeable Option – ordered as Engineering Information Document Charged for Dispatch inside and outside Central Office UCL-ND (Non- Designed) Chargeable Option Not Available Not Available Chargeable Option – ordered as Engineering Information Document Charged for Dispatch inside and outside Central Office Unbundled Voice Loops - SL-2 (including 2- and 4-wire UVL) (Designed) Included Chargeable Option Included Included Charged for Dispatch outside Central Office Unbundled Digital Loop (Designed) Included Chargeable Option (except on Universal Digital Channel) Included (where appropriate) Included Charged for Dispatch outside Central Office Unbundled Copper Loop (Designed) Chargeable in accordance with Section 2 Not available Included Included Charged for Dispatch outside Central Office For UVL-SL1 and UCLs, Lightyear must order and will be billed for both OC and OC-TS if requesting OC-TS.
Malicious Use of Orphan Glue Records Registry Operator shall take action to remove orphan glue records (as defined at xxxx://xxx.xxxxx.xxx/en/committees/security/sac048.pdf) when provided with evidence in written form that such records are present in connection with malicious conduct.
Accounts for Minors We may require any account established by a minor to be a joint account with an owner who has reached the age of majority under state law and who shall be jointly and severally liable to us for any returned item, overdraft, or unpaid charges or amounts on such account. We may pay funds directly to the minor without regard to his or her minority. Unless a guardian or parent is an account owner, the guardian or parent shall not have any account access rights. We have no duty to inquire about the use or purpose of any transaction. We will not change the account status when the minor reaches the age of majority, unless authorized in writing by all account owners.
200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
Names of Stewards The Union shall notify the Employer in writing of the name of each Xxxxxxx and the department(s) he represents and the name of the Chief Xxxxxxx, before the Employer shall be required to recognize him.
