Common use of Attachments and Enclosures Clause in Contracts

Attachments and Enclosures. The Consultant will provide a survey report including an alignment plan for all projects. The Consultant shall include the previously furnished list and description of the location and coordinate values of each control survey point, the original field notes showing the horizontal and angular measurements, and vertical measurements and the original computations for the adjustment of horizontal and angular measurements, and vertical measurements for proper closure of each control survey and level loop or line. Station List - Include a table, which lists the station name, coordinates, elevation and station type for all stations surveyed. Field Project Sketch - Attach a copy of the project sketch. If there are multiple copies of the sketch showing different data, attach a copy of each. The project sketch shall include the following: 1. All stations occupied during survey. 2. A border drawn around the edge with grid ticks for latitude and longitude. In addition to the stations surveyed, the sketch should show other stations of the existing network located within or near the project area. Indicate in the survey report whether any attempt was made to recover these stations. The report and/or recovery notes must indicate why the recovered stations were not surveyed. To indicate a station that was not recovered use “NR” next to that station’s symbol. Survey points will be shown in an inset sketch when they are too closely together to be depicted clearly on the network sketch. Digital photo/ rubbings of monuments (control stations) shall be included in survey report. Field Logs - Provide dated copies of field survey notes and record books. Quality Control Checklists- Geodetic & General Report- (formats in Survey Manual Appendix C) Quality Assurance Checklist- Geodetic and General Reports- (formats in Survey Manual Appendix C)

Attachments and Enclosures. The Consultant will provide a survey report including an alignment plan for all projects. The Consultant shall include the previously furnished list and description of the location and coordinate values of each control survey point, the original field notes showing the horizontal and angular measurements, and vertical measurements and the original computations for the adjustment of horizontal and angular measurements, and vertical measurements for proper closure of each control survey and level loop or line. Station List - Include a table, which lists the station name, coordinates, elevation and station type for all stations surveyed. Field Project Sketch - Attach a copy of the project sketch. If there are multiple copies of the sketch showing different data, attach a copy of each. The project sketch shall include the following: 1. All stations occupied during survey. 2. A border drawn around the edge with grid ticks for latitude and longitude. In addition to the stations surveyed, the sketch should show other stations of the existing network located within or near the project area. Indicate in the survey report whether any attempt was made to recover these stations. The report and/or recovery notes must indicate why the recovered stations were not surveyed. To indicate a station that was not recovered use “NR” next to that station’s symbol. Survey points will be shown in an inset sketch when they are too closely together to be depicted clearly on the network sketch. Digital photo/ rubbings of monuments (control stations) shall be included in survey report, as necessary. Field Logs - Provide dated copies of field survey notes and record books. Quality Control Checklists- Geodetic & General Report- (formats in Survey Manual Appendix C) Quality Assurance Checklist- Geodetic and General Reports- (formats in Survey Manual Appendix C)