Common use of BASIS OF CHARGING Clause in Contracts

BASIS OF CHARGING. (a) The Hirer shall render to the Owner for each Working Week an accurate statement of the number of hours the Plant has worked each day. When any personnel, operator or driver is supplied by the Owner, the Hirer shall sign their time record sheets. The signature of the Hirer’s representative shall bind the Hirer to accept the hours shown on the time records sheets. (b) Full allowance will be made for breakdown periods resulting from mechanical or electrical faults or absence of driver or operator supplied by the Owner except where breakdown is due to acts or omissions of third parties and / or the Hirer’s misuse, misdirection or negligence, subject however to the provisions of clause 8 of these conditions. (c) Breakdown time in respect of such periods shall be allowed for not more than the Working Day less the actual hours worked. (d) Plant shall be hired out either: (i) for a stated minimum number of hours per Working Day or per Working Week or, (ii) without any qualification as to minimum hours. Odd days at the beginning and at the end of the Hire Period shall be charged pro rata. (e) Stoppages due to changing of tyres and repairs to punctures will be chargeable as working time up to a maximum of 2 hours for any one stoppage and any excess will be charged for at the appropriate idle time rates. (f) In the case of Plant which is required to be dismantled for the purpose of transportation, if the Owner agrees to a modification of the hire charge for the period required for assembling on site and dismantling upon completion of the Hire Period, such modification of the hire charge and the Hire Period for which it shall apply shall be stated in the Offer / Contract.

BASIS OF CHARGING. (a) The Hirer shall render to the Owner for each Working Week an accurate statement of the number of hours the Plant has worked each day. When any personnel, operator or driver is supplied by the Owner, the Hirer shall sign their time record sheets. The signature of the Hirer’s representative shall bind the Hirer to accept the hours shown on the time records sheets. Where applicable, the Plant’s telematics may be checked against the Hirer’s statement or operator’s signed timesheet, should any conflict arise, then the telematics will take precedence over all other records. (If there is any conflict between the signed timesheet and any other record taken, then the signed timesheet takes precedence.) (b) The Hirer shall be charged for any toolbox talks, briefings, inductions, mandatory training which the Owner’s personnel have to attend prior to or when working on the Hirer’s site. (bc) Full allowance will be made for breakdown periods resulting from mechanical or electrical faults or absence of driver or operator supplied by the Owner except where breakdown is due to acts or omissions of third parties and / or and/or the Hirer’s misuse, misdirection or negligence, subject however to the provisions of clause 8 of these conditions. (cd) Breakdown time in respect of such periods shall be allowed for not more than the Working Day less the actual hours worked. (de) Plant shall be hired out either: (i) for a stated minimum number of hours per Working Day or per Working Week or, (ii) without any qualification as to minimum hours. Odd days at the beginning and at the end of the Hire Period shall be charged pro rata. (ef) Stoppages due to changing of tyres and repairs to punctures will be chargeable as working time up to a maximum of 2 hours for any one stoppage and any excess will be charged for at the appropriate idle time rates. (fg) In the case of Plant which is required to be dismantled for the purpose of transportation, if the Owner agrees to a modification of the hire charge for the period required for assembling on site and dismantling upon completion of the Hire Period, such modification of the hire charge and the Hire Period for which it shall apply shall be stated in the Offer / Offer/Contract. (h) The Hirer shall pay the Owner’s invoice within 30 days net unless otherwise agreed. (i) Any query with the Owner’s invoice must be raised in writing by the Hirer within 14 calendar days of receiving the invoice. (j) The Owner in their absolute discretion may agree to accept electronic records and data as an alternative to written statements of the number of hours, time record sheets and other information related to charging that the Hirer is required to provide to the Owner. Such electronic records and data may include but is not limited to telematics automatically generated by the plant and electronic log books.

BASIS OF CHARGING. (a) The Hirer shall render to the Owner for each Working Week an accurate statement of the number of hours the Plant has worked each day. When any personnel, operator or driver is supplied by the Owner, the Hirer shall sign their time record sheets. The signature of the Hirer’s representative shall bind the Hirer to accept the hours shown on the time records sheets. (b) Full allowance will be made for breakdown periods resulting from mechanical or electrical faults or absence of driver or operator supplied by the Owner except where breakdown is due to acts or omissions of third parties and / or the Hirer’s misuse, misdirection or negligence, subject however to the provisions of clause 8 of these conditions. (c) Breakdown time in respect of such periods shall be allowed for not more than the Working Day less the actual hours worked. (d) Plant shall be hired out either: (i) for a stated minimum number of hours per Working Day or per Working Week or, (ii) without any qualification as to minimum hours. Odd days at the beginning and at the end of the Hire Period shall be charged pro rata. (e) Stoppages due to changing of tyres and repairs to punctures will be chargeable as working time up to a maximum of 2 hours for any one stoppage and any excess will be charged for at the appropriate idle time rates. (f) In the case of Plant which is required to be dismantled for the purpose of transportation, if the Owner agrees to a modification of the hire charge for the period required for assembling on site and dismantling upon completion of the Hire Period, such modification of the hire charge and the Hire Period for which it shall apply shall be stated in the Offer / Contract.. conditions for the hiring of plant. (With effect from July 2011)

BASIS OF CHARGING. (a) The Hirer shall render to the Owner for each Working Week an accurate statement of the number of hours the Plant has worked each day. When any personnel, operator or driver is supplied by the Owner, the Hirer shall sign their time record sheets. The signature sign ature of the Hirer’s representative shall bind the Hirer to accept the hours shown on the time records sheets. (b) Full allowance will be made for breakdown periods resulting from mechanical or electrical faults or absence of driver or operator supplied by the Owner except where breakdown is due to acts or omissions of third parties and / or the Hirer’s misuse, misdirection or negligence, subject however to the provisions of clause 8 of these conditions. (c) Breakdown time in respect of such periods shall be allowed for not more than the Working Day less the actual hours worked. (d) Plant shall be hired out either: (i) for a stated minimum number of hours per Working Day or per Working Week or, (ii) without any qualification as to minimum hours. Odd days at the beginning and at the end of the Hire Period shall be charged pro rata. (e) Stoppages due to changing of tyres and repairs to punctures will be chargeable as working time up to a maximum of 2 hours for any one stoppage and any excess will be charged for at the appropriate idle time rates. (f) In the case of Plant which is required to be dismantled for the purpose of transportation, if the Owner agrees to a modification of the hire charge for the period required require d for assembling on site and dismantling upon completion of the Hire Period, such modification of the hire charge and the Hire Period for which it shall apply shall be stated in the Offer / Contract.

BASIS OF CHARGING. (a) The Hirer shall render to the Owner for each Working Week an accurate statement of the number of hours the Plant has worked each day. When any personnel, operator or driver is supplied by the Owner, the Hirer shall sign their time record sheets. The signature of the Hirer’s representative shall bind the Hirer to accept the hours shown on the time records sheets. (b) Full allowance will be made for breakdown periods resulting from mechanical or electrical faults or absence of driver or operator supplied by the Owner except where breakdown is due to acts or omissions of third parties and / or the Hirer’s misuse, misdirection or negligence, subject however to the provisions of clause 8 of these conditions. (c) Breakdown time in respect of such periods shall be allowed for not more than the Working Day less the actual hours worked. (d) Plant shall be hired out either: (i) for a stated minimum number of hours per Working Day or per Working Week or, (ii) without any qualification as to minimum hours. Odd days at the beginning and at the end of the Hire Period shall be charged pro rata. (e) Stoppages due to changing of tyres and repairs to punctures will be chargeable as working time up to a maximum of 2 hours for any one stoppage and any excess will be charged for at the appropriate idle time rates. (f) In the case of Plant which is required to be dismantled for the purpose of transportation, if the Owner agrees to a modification of the hire charge for the period required for assembling on site and dismantling upon completion of the Hire Period, such modification of the hire charge and the Hire Period for which it shall apply shall be stated in the Offer / Contract.

BASIS OF CHARGING. (a) The Hirer shall render to the Owner for each Working Week an accurate statement of the number of hours the Plant has worked each day. When any personnel, operator or driver is supplied by the Owner, the Hirer shall sign their time record sheets. The signature of the Hirer’s representative shall bind the Hirer to accept the hours shown on the time records sheets. (b) Full allowance will be made for breakdown periods resulting from mechanical or electrical electri- cal faults or absence of driver or operator supplied by the Owner except where breakdown break- down is due to acts or omissions of third parties and / or the Hirer’s misuse, misdirection or negligence, subject however to the provisions of clause 8 of these conditions. (c) Breakdown time in respect of such periods shall be allowed for not more than the Working Day less the actual hours worked. (d) Plant shall be hired out either:; (i) for a stated minimum number of hours per Working Day or per Working Week or, (ii) without any qualification as to minimum hours. Odd days at the beginning and at the end of the Hire Period shall be charged pro rata. (e) Stoppages due to changing of tyres and repairs to punctures will be chargeable as working time up to a maximum of 2 hours for any one stoppage and any excess will be charged for at the appropriate idle time rates. (f) In the case of Plant which is required to be dismantled for the purpose of transportation, if the Owner agrees to a modification of the hire charge for the period required for assembling on site and dismantling upon completion of the Hire Period, such modification modifica- tion of the hire charge and the Hire Period for which it shall apply shall be stated in the Offer / Contract.

BASIS OF CHARGING. (a) The Hirer shall render to the Owner for each Working Week week an accurate statement of the number of hours the Plant plant has worked each day. When any personnel, operator or driver Where the plant is supplied accompanied by the OwnerOwners driver or operator, the Hirer shall sign their time record sheetsthe employee’s Time Record Sheets. The signature of the Hirer’s Hirers’ representative shall bind the Hirer to accept the hours shown on the time records sheetsTime Record Sheets. (b) Full allowance will be made for breakdown periods resulting from mechanical or electrical faults or absence of driver or operator supplied by the Owner except where breakdown is due to acts or omissions of third parties and / or the Hirer’s Hirers misuse, misdirection or negligence, subject however to the provisions of clause Clause 8 of these conditionsthis Agreement. (c) Breakdown time in respect of such periods shall be allowed for not more than the Working Day 8 hours per day Monday to Thursday and not more than 7 hours on Friday less the actual hours worked. (d) Plant shall be hired out either: (i) 1. for a stated minimum number of hours per Working Day day or per Working Week week or, (ii) 2. without any qualification qualifications as to minimum hours. Odd days at the beginning and at the end of the Hire Period hire period shall be charged pro rata. (e) Stoppages due to changing of tyres and repairs to punctures will be chargeable as working time up to a maximum of 2 hours for any one stoppage and any excess will be charged for at the appropriate idle time rates. (f) In the case of Plant the plant which is required requires to be dismantled for the purpose of transportation, if the Owner agrees to a modification of the hire charge for the period required for assembling on site and dismantling upon completion of the Hire Periodhire, such modification of the hire charge and the Hire Period period for which it shall apply shall be stated in on the Offer / Hire Contract.

BASIS OF CHARGING. (a) The Hirer shall render to the Owner for each Working Week an accurate statement of the number of hours the Plant has worked each day. When any personnel, operator or driver is supplied by the Owner, the Hirer shall sign their time record sheets. The signature of the Hirer’s representative shall bind the Hirer to accept the hours shown on (If there is any conflict between the time records sheetssigned timesheet and any other record taken, then the signed timesheet takes precedence.) (b) The Hirer shall be charged for any toolbox talks, briefings, inductions, mandatory training which the Owner’s personnel have to attend prior to or when working on the Hirer’s site. (bc) Full allowance will be made for breakdown periods resulting from mechanical or electrical faults or absence of driver or operator supplied by suppliedby the Owner except where breakdown is due to acts or omissions of third parties and / or the Hirer’s misuse, misdirection or negligence, subject however to the provisions of clause 8 of these conditions. (cd) Breakdown time in respect of such periods shall be allowed for not more than the Working Day less the actual hours worked. (de) Plant shall be hired out either: (i) for a stated minimum number of hours per Working Day or per Working Week or, (iif) without any qualification as to minimum hours. Odd days at the beginning and at the end of the Hire Period shall be charged pro rata. (e) . Stoppages due to changing of tyres and repairs to punctures will be chargeable as working time up to a maximum of 2 hours for any one stoppage and any excess will be charged for at the appropriate idle time rates. (fg) In the case of Plant which is required to be dismantled for the purpose of transportation, if the Owner agrees to a modification of the hire charge for the period required for assembling on site and dismantling upon completion of the Hire Period, such modification of the hire charge and the Hire Period for which it shall apply shall be stated in the Offer / Contract. (h) The Hirer shall pay the Owner’s invoice within 30 days net unless otherwise agreed. (i) Any query with the Owner’s invoice must be raised in writing by the Hirer within 14 calendar days of receiving the invoice.

BASIS OF CHARGING. (a) The Hirer shall render to the Owner for each Working Week an accurate statement of the number of hours the Plant has worked each day. When any personnel, operator or driver is supplied by the Owner, the Hirer shall sign their time record sheets. The signature of the Hirer’s representative shall bind the Hirer to accept the hours shown on (If there is any conflict between the time records sheetssigned timesheet and any other record taken, then the signed timesheet takes precedence.) (b) The Hirer shall be charged for any toolbox talks, briefings, inductions, mandatory training which the Owner’s personnel have to attend prior to or when working on the Hirer’s site. (bc) Full allowance will be made for breakdown periods resulting from mechanical or electrical faults or absence of driver or operator supplied by the Owner except where breakdown is due to acts or omissions of third parties and / or the Hirer’s misuse, misdirection or negligence, subject however to the provisions of clause 8 of these conditions. (cd) Breakdown time in respect of such periods shall be allowed for not more than the Working Day less the actual hours worked. (de) Plant shall be hired out either: (i) for a stated minimum number of hours per Working Day or per Working Week or, (iif) without any qualification as to minimum hours. Odd days at the beginning and at the end of the Hire Period shall be charged pro rata. (e) . Stoppages due to changing of tyres and repairs to punctures will be chargeable as working time up to a maximum of 2 hours for any one stoppage and any excess will be charged for at the appropriate idle time ratestimerates. (fg) In the case of Plant which is required to be dismantled for the purpose of transportation, if the Owner agrees to a modification of the hire charge for the period required for assembling on site and dismantling upon completion of the Hire Period, such modification of the hire charge and the Hire Period for which it shall apply shall be stated in the Offer / Contract. (h) The Hirer shall pay the Owner’s invoice within 30 days net unless otherwise agreed. (i) Any query with the Owner’s invoice must be raised in writing by the Hirer within 14 calendar days of receiving the invoice.

BASIS OF CHARGING. (a) The Hirer shall render to the Owner for each Working Week an accurate statement of the number of hours the Plant has worked each day. When any personnel, operator or driver is supplied by the Owner, the Hirer shall sign their time record sheets. The signature of the Hirer’s representative shall bind the Hirer to accept the hours shown on the time records sheets. (b) Full allowance will be made for breakdown periods resulting from mechanical or electrical faults or absence of driver or operator supplied by the Owner except where breakdown is due to acts or omissions of third parties and / or the Hirer’s misuse, misdirection or negligence, subject however to the provisions of clause 8 of these conditions. (c) Breakdown time in respect of such periods shall be allowed for not more than the Working Day less the actual hours worked. (d) Plant shall be hired out either: : (i) for a stated minimum number of hours per Working Day or per Working Week or, , (ii) without any qualification as to minimum hours. Odd days at the beginning and at the end of the Hire Period shall be charged pro rata. (e) Stoppages due to changing of tyres and repairs to punctures will be chargeable as working time up to a maximum of 2 hours for any one stoppage and any excess will be charged for at the appropriate idle time rates. (f) In the case of Plant which is required to be dismantled for the purpose of transportation, if the Owner agrees to a modification of the hire charge for the period required for assembling on site and dismantling upon completion of the Hire Period, such modification of the hire charge and the Hire Period for which it shall apply shall be stated in the Offer / Contract. Construction Plant-hire Association (CPA) model conditions for the hiring of plant.