Maintenance Obligations Local Agency shall maintain and operate the Work constructed under this Agreement at its own cost and expense during their useful life, in a manner satisfactory to the State and FHWA. Local Agency shall conduct such maintenance and operations in accordance with all applicable statutes, ordinances, and regulations pertaining to maintaining such improvements. The State and FHWA may make periodic inspections to verify that such improvements are being adequately maintained.
Interconnection Customer Obligations The Interconnection Customer shall maintain the Large Generating Facility and the Interconnection Customer’s Interconnection Facilities in a safe and reliable manner and in accordance with this LGIA.
Supplier Obligations 2.1 Deliverables Supplier agrees to supply, and Xxxxx NZT agrees to acquire, the Deliverables subject to and in accordance with the terms of the Agreement. 2.2 Performance standards Supplier will perform its obligations under the Agreement in a timely manner and in accordance with Good Industry Practice. 2.3 Laws, licences and approvals In carrying out its activities in connection with this Agreement, Supplier will comply with all applicable Laws and will not commit any act or omit to do anything that causes or has the potential to cause Spark NZT to breach any Laws. Supplier will have all the licences, consents and approvals needed to supply the Deliverables and perform and observe its other obligations in accordance with the Agreement. 2.4 Requirements Supplier will provide the Deliverables to Spark NZT free of Defects and in accordance with all applicable Requirements, Service Levels and timeframes for delivery set out in a Side Letter or PO. 2.5 Co-operation Supplier will co-operate in good faith and in a timely manner with other Spark NZT suppliers, and if reasonably requested by Spark NZT, will provide information and assistance as necessary to facilitate the supply of goods or services to Spark NZT by those suppliers. A breach of this clause will be deemed a material breach of the Agreement. 2.6 Policies Supplier will use its best endeavours to follow Spark NZT’s applicable policies as provided to Supplier in writing from time to time, and a persistent or material breach of any of those policies will constitute a material breach of the Agreement. Supplier will advise Spark NZT immediately that it becomes aware that it has breached or is likely to have breached any of Spark NZT’s policies including if Spark NZT’s security has been compromised. 2.7 Key Personnel Supplier will assign the Key Personnel to the corresponding roles specified in the Agreement, and will not re-assign those Key Personnel without Spark NZT’s prior written consent, not to be unreasonably withheld or delayed. 2.8 Documentation Accompanying each Deliverable, Supplier will provide Spark NZT with corresponding Documentation. Supplier will ensure that the Documentation includes a complete set of operating, technical and user manuals with a level of specificity to enable a reasonably competent user to make effective use of each Deliverable. If Spark NZT discovers any error in the Documentation, Spark NZT may notify Supplier in writing of the error and Supplier will promptly correct it and provide Spark NZT with amended Documentation at no additional cost to Spark NZT. Spark NZT may copy Documentation as reasonably necessary to enable Spark NZT to enjoy the benefit of the Deliverables in accordance with the Agreement. 2.9 Information Supplier will prepare, and retain during the term of the Agreement and for a reasonable period afterwards, accurate records and accounts in relation to all material aspects of its activities under the Agreement, including the Charges and Deliverables, in each case to a level of detail, completeness and accuracy consistent with Good Industry Practice and any relevant terms in this Agreement.
Maintenance obligations of the Contractor (i) The Contractor shall maintain the Project Highway for a period of 5 (five) years, corresponding to the Defects Liability Period, commencing from the date of the Completion Certificate (the “Maintenance Period”). For the performance of its Maintenance obligations, the Contractor shall be paid (if not included in the Schedule - H): (a) For flexible pavement with 5 years Maintenance Period including structures: no maintenance charges shall be paid for the first year; 0.50%of the Contract Price each for the second, third and fourth year; and 1% of the Contract Price for the fifth year (b) For rigid pavement with 10 years Maintenance Period including structures: 0.25% of the Contract Price each for the first, second and third year, 0.5% of the Contract Price each for fourth, fifth, sixth and seventh year, and 0.75% of the Contract Price each for eighth, ninth and tenth year. (c) For flexible perpetual pavement with 10 years maintenance period including structures: no maintenance charges shall be paid for the first year; 0.5% of the Contract Price each for the second, third and fourth year; 0.75% of the Contract Price each for the subsequent years till laying of the renewal layer or end of maintenance period, whichever is earlier. The requirement for the renewal layer shall be worked out based on the survey and investigation of the existing pavement and the cost of such renewal works shall be made separately to the Contractor based on the principles defined under clause 13.2(iii). After laying of the renewal layer, the Contractor shall be paid @ 0.5% of the original Contract Price each for the remaining years till the end of maintenance period. (d) For stand-alone Bridge/ Tunnel works: the contractor shall be paid @ 0.25% of the Contract Price each for the first five years and @ 0.50% of the Contract Price each for the remaining period of five years. (e) For any other works: The contractor shall be paid at the rate of 0.50% of the contract price for the entire duration of maintenance period.
Third Party Obligations 3.1. The THIRD PARTY shall:- 3.1.1. not divulge the Confidential Information to any party other than as provided for in this Confidentiality Agreement; 3.1.2. use the Confidential Information only for the purposes necessary in providing the services for which he is engaged by the AUTHORITY; and 3.1.3. make no commercial use of the Confidential Information or any part thereof. 3.2. Notwithstanding the foregoing, the THIRD PARTY shall be entitled to make any disclosure required by law of the Confidential Information and shall notify the AUTHORITY of so doing in accordance with the provisions of paragraph 6.
Performance Obligation 11.1 Interconnection Customer's Interconnection Facilities 11.2 Participating TO's Interconnection Facilities 11.3 Network Upgrades and Distribution Upgrades
Performance Obligations The Purchaser shall have performed in all respects all obligations required to be performed by it under this Agreement at or prior to the Closing.
Surety Obligations No Borrower or Subsidiary is obligated as surety or indemnitor under any bond or other contract that assures payment or performance of any obligation of any Person, except as permitted hereunder.
Warranty Obligations (a) Project Co represents, warrants and covenants that: (i) the Works shall conform to the requirements of this Project Agreement, Good Industry Practice, Applicable Law and all professional engineering principles generally accepted as standards of the industry in the Province of Ontario; (ii) the Works shall be free of defects, including design defects, errors and omissions; and (iii) materials and equipment shall be of good quality and in compliance with this Project Agreement. (b) During the Warranty Period and subject to Section 11.15(c), Project Co shall promptly, at its sole cost and expense, correct and Make Good all Construction Defects arising in respect of the Works. For greater certainty, Project Co is required to correct and Make Good Construction Defects related to any Product during the applicable Warranty Period despite Project Co having obtained on Contracting Authority’s behalf industry- standard or other equipment warranties in accordance with Section 11.15(f). For all work to correct Construction Defects, the applicable Warranty Period shall be extended for a further two years from the date of the last work completed in respect of such corrective Works. For clarity, any extension of a Warranty Period for the purposes of a correction shall only apply to the relevant Construction Defect and not the Works as a whole. (c) In addition to the obligation to correct and Make Good Construction Defects during the Warranty Period, Project Co shall at its expense correct and Make Good any Construction Defects that could not reasonably have been ascertained by a competent person in accordance with Good Industry Practice during a visual inspection of the Works (“Construction Latent Defect”), provided Contracting Authority gives Project Co written Notice of the Construction Latent Defect within the time frame applicable to such Construction Latent Defect pursuant to the Limitations Act, 2002 (Ontario). (d) The warranties described in this Section 11.15 shall cover labour and material, including, the costs of removal and replacement of covering materials. The warranties shall not limit extended warranties on any Product or item of equipment called for elsewhere in the Output Specifications or otherwise provided by any manufacturer of such Product or equipment. (e) If Project Co fails to correct and Make Good any Construction Defects or Construction Latent Defects in accordance with Sections 11.15(b) and 11.15(c) and in the time period specified in Section 11.16(a) or Section 11.16(b), as applicable, without prejudice to any other right or remedy Contracting Authority may have, Contracting Authority may correct such Construction Defects or Construction Latent Defects at Project Co’s sole cost and expense. (f) Project Co shall obtain warranties from the manufacturers of each of the Products for the duration(s) and in accordance with the applicable requirements specified in the Output Specifications in the name of and to the benefit of both Project Co and Contracting Authority. Where, in respect of a Product warranty, the Output Specifications do not specify a specific duration and/or other requirements, Project Co shall obtain industry-standard warranties from the applicable manufacturers in the name of and to the benefit of Project Co and Contracting Authority which shall extend no less than two years from the Substantial Completion Date. Each Product warranty shall be issued by the applicable manufacturer and delivered to Project Co no later than 30 days prior to the Substantial Completion Date. Project Co shall ensure that each Product warranty, including any Product warranty extended under this Section 11.15(f), is fully assigned to Contracting Authority, at no cost or expense to Contracting Authority, at the end of the Warranty Period, as such Warranty Period may be extended in accordance with Section 11.15(b).
Client Obligations 7.1 Client shall ensure that each Authorized User shall keep a secure password for its use of the Services, that such password shall be changed frequently and that each Authorized User password shall be kept confidential. 7.2 Client shall permit Productsup to audit Client’s use of the Services in order to establish that the use of the Services by Client is in accordance with the Scope. 7.3 Client shall: 7.3.1 timely provide all necessary cooperation and information as may be reasonably required by Productsup in order to provide the Services; 7.3.2 and shall procure that its Authorized Users shall: (i) use the Services in accordance with the terms and conditions of the Agreement; (ii) comply with all applicable laws and regulations with respect to its activities under the Agreement; (iii) only use the Services for lawful purposes; and (iv) conduct Client’s business with the highest of ethical standards and fairness. Client shall be liable for any breach of the Agreement by its Authorized Users; 7.3.3 be solely responsible for procuring and maintaining network connections and telecommunications links and resolve all problems, conditions, delays and delivery failures arising from or relating to such network connections or telecommunications links; 7.3.4 use all reasonable efforts to prevent any unauthorized access to, or use of, the Services and, in the event of any such unauthorized access or use, promptly notify Productsup; 7.3.5 be solely responsible for the accuracy, completeness, design, appropriateness, creation, maintenance, and updating of all Client Data in the use of the Services. Productsup shall not be liable for any errors or inaccuracies in (i) any information provided by Client; (ii) any Client Data, or (iii) any changes or modifications to any Client Data by Productsup upon Client’s written instructions, beyond its responsibility to accurately reproduce such Client Data on Client’s instruction; 7.3.6 be solely responsible for the creation and maintenance of the technical environment IT infrastructure regarding access to the Services, including, without limitation to the used 7.3.7 be responsible for obtaining all necessary licenses and consents required to use Client Data, if any, and including without limitation those from the owners or licensees of any third-party information) and Client warrants and represents that such licenses and consents have been obtained. 7.4 Client shall not and shall procure that its Authorized Users shall not during the course of its use of the Services, upload, input, access, store, distribute or transmit any Viruses, nor any material, including without limitation Client Data, that: 7.4.1 is Inappropriate Content; 7.4.2 is unlawful (including breach of Intellectual Property Rights of any other party), harmful, threatening, defamatory; and 7.4.3 facilitates illegal activity or is otherwise illegal or causes damage or injury to any person or property.