Lane closure (i) The Contractor shall not close any lane of the Project Highway for undertaking maintenance works except with the prior written approval of the Authority’s Engineer. Such approval shall be sought by the Contractor through a written request to be made at least 10 (ten) days before the proposed closure of lane and shall be accompanied by particulars thereof. Within 5 (five) business days of receiving such request, the Authority’s Engineer shall grant permission with such modifications as it may deem necessary and a copy of such permission shall be sent to the Authority. (ii) Upon receiving the permission pursuant to Clause 14.5 (i), the Contractor shall be entitled to close the designated lane for the period specified therein, and for all lane closures extending a continuous period of 48 (forty-eight) hours, the Contractor shall, in the event of any delay in re-opening such lane, for every stretch of 250 (two hundred and fifty) metres, or part thereof, pay Damages to the Authority calculated at the rate of 0.1% (zero point one per cent) of the monthly maintenance payment for each day of delay until the lane has been re-opened for traffic. In the event of any delay in re-opening such lanes or in the event of emergency decommissioning and closure to traffic of the whole or any part of the Project Highway due to failure of the Contractor, the Contractor shall pay damages to the Authority at double the above rate, without prejudice the rights of the Authority under this Agreement including Termination thereof.
Pre-Closing Promptly upon the execution of this Agreement, Seller shall notify the Manufacturer regarding the transactions contemplated by this Agreement. Buyer (or its affiliate) shall promptly apply to the Manufacturer for the issuance of a contractual right to operate an automobile dealership upon the Premises. The Parties shall use commercially reasonable best efforts to obtain Manufacturer approval as soon as possible. Seller shall promptly provide the requisite information, documents and access necessary to prepare for Closing and ensure a seamless operational transfer of the Assets. Effective as of the Closing, Seller shall terminate its Dealer Sales and Service Agreements with the Manufacturer relative to the Dealership location and execute and deliver all of the Manufacturer’s customary documents and promptly remove Manufacturer’s intellectual property from all publicly visible Excluded Assets in every form and medium (i.e., retained internet sites, signs, etc.). Seller shall fully cooperate with Buyer, and take all reasonable steps to assist Buyer, in Buyer’s efforts to obtain its own similar Dealer Sales and Service Agreements with the Manufacturer. All actions to be taken at the Closing pursuant to this Agreement will be deemed to have occurred simultaneously, and no action, document or transaction will be deemed to have been taken, delivered or effected, until all such actions, documents and transactions have been taken, delivered or effected. Promptly after the Closing, Seller shall transfer to Buyer certificates of title or origin for all vehicles and all of its registration lists, owner follow-up lists and service files on hand as of the Closing, provided that such lists and files relate to the Assets. If Seller presents assets for purchase post-Closing that would have otherwise been Assets, then such assets may be purchased at a mutually agreed to price or otherwise retained by Seller. Buyer is not required to submit an offer. This does not apply to in-transit vehicles from the Manufacturer. Buyer shall retain and safeguard the pre-Closing customer paper deal jackets retained by Buyer in accordance with law, and, until Buyer destroys such records in accordance with company policy in effect from time to time, Seller shall have reasonable access to Seller’s pre-Closing customer records (e.g., paper deal jackets) and any records related to Assigned Contracts after the Closing for any legitimate purpose, such as (by way of example and not by limitation) for resolving customer inquiries.
Closing Escrow The Closing shall take place by means of a so called “New York style” escrow (the “Closing Escrow”), and, at or prior to the Closing, the Parties shall enter into a closing escrow agreement with the Escrow Agent with respect to the Closing Escrow in form and substance reasonably acceptable to Seller, Purchaser and the Escrow Agent (the “Closing Escrow Agreement”) pursuant to which (i) the Purchase Price to be paid by Purchaser pursuant to Section 3.3 shall be deposited with Escrow Agent, (ii) all of the documents required to be delivered by Seller and Purchaser at Closing pursuant to this Agreement shall be deposited with Escrow Agent, and (iii) at Closing, the Purchase Price (as adjusted pursuant to Section 3.1) and the Xxxxxxx Money shall be disbursed to Seller and the documents deposited into the Closing Escrow shall be delivered to Seller and Purchaser (as the case may be) pursuant to the Closing Escrow Agreement.
Escrow Closing Buyer and Seller acknowledge and understand that the closing of the sale may be handled by an escrow agent and that the listing broker is authorized to transfer the xxxxxxx money or any other funds received to the escrow agent. After the transfer, Broker shall have no further responsibility or liability to Buyer or Seller to account for the funds. Escrow agent’s charges shall be equally divided between Buyer and Seller.
Contract Closure Contracting Officer shall give appropriate written notice to Purchaser when Purchaser has complied with the terms of this contract. Purchaser shall be paid refunds due from Timber Sale Account un- der B4.24 and excess cooperative deposits under B4.218.
Seller Closing Deliveries No later than 1 Business Day prior to the Closing Date, Seller shall deliver to Escrow Agent, each of the following items: 5.2.1 Special Warranty Deed (the "Deed") in the form attached as Exhibit B to Purchaser, subject to the Permitted Exceptions. 5.2.2 A Xxxx of Sale in the form attached as Exhibit C. 5.2.3 Two (2) originals of a General Assignment in the form attached as Exhibit D (the "General Assignment"). 5.2.4 Two (2) originals of an Assignment of Leases and Security Deposits in the form attached as Exhibit E (the "Leases Assignment"). 5.2.5 A letter in the form attached hereto as Exhibit F prepared and addressed by Purchaser, and countersigned by Seller, to each of the vendors under the Terminated Contracts informing them of the termination of such Terminated Contract as of the Closing Date (subject to any delay in the effectiveness of such termination pursuant to the express terms of each applicable Terminated Contract) (the "Vendor Terminations"). 5.2.6 Seller's closing statement. 5.2.7 A title affidavit or an indemnity form reasonably acceptable to Seller, which is sufficient to enable Title Insurer to delete the standard pre-printed exceptions to the title insurance policy to be issued pursuant to the Title Commitment. 5.2.8 A certification of Seller's non-foreign status pursuant to Section 1445 of the Internal Revenue Code of 1986, as amended. 5.2.9 Resolutions, certificates of good standing, and such other organizational documents as Title Insurer shall reasonably require evidencing Seller's authority to consummate this transaction. 5.2.10 An updated Rent Roll effective as of a date no more than 3 Business Days prior to the Closing Date; provided, however, that the content of such updated Rent Roll shall in no event expand or modify the conditions to Purchaser's obligation to close as specified under Section 8.1.
Post-Closing Matters Execute and deliver the documents and complete the tasks set forth on Schedule 6.14, in each case within the time limits specified on such schedule, as such time limits may be extended from time to time by Agent in its reasonable discretion.
Pre-Closing Transactions Prior to the purchase of the Initial Securities on the Closing Date, the Pre-Closing Transactions shall have been duly consummated at the respective times and on the terms contemplated by this Agreement, the General Disclosure Package and the Prospectus and the Representatives shall have received such evidence that the Pre-Closing Transactions have been consummated as the Representatives may reasonably request.
Effective Time; Closing Subject to the provisions of this Agreement, the parties hereto shall cause the Merger to be consummated by filing a Certificate of Merger with the Secretary of State of the State of Delaware in accordance with the relevant provisions of Delaware Law (the “Certificate of Merger”) (the time of such filing with the Secretary of State of the State of Delaware (or such later time as may be agreed in writing by the Company and Parent and specified in the Certificate of Merger) being the “Effective Time”) as soon as practicable on the Closing Date. The closing of the Merger (the “Closing”) shall take place at the offices of Wxxxxx Xxxxxxx Xxxxxxxx & Rxxxxx, Professional Corporation, located at One Market, Sxxxx Xxxxx, Xxxxx 0000, Xxx Xxxxxxxxx, Xxxxxxxxxx, at a time and date to be specified by the parties, which shall be no later than the second business day after the satisfaction or waiver of the conditions set forth in Article VI (other than those that by their terms are to be satisfied or waived at the Closing), or at such other time, date and location as the parties hereto agree in writing; provided, however, that if all the conditions set forth in Article VI shall not have been satisfied or waived on such second business day, then the Closing shall take place on the first business day on which all such conditions shall have been satisfied or waived. The date on which the Closing occurs is referred to herein as the “Closing Date.”
Closing; Closing Date Closing" and "Closing Date" have the meanings set forth in Section 5.3.
