Common use of Buyer and Seller Responsibilities Clause in Contracts

Buyer and Seller Responsibilities. 2.1. Buyer shall be responsible for correctly specifying and advising Seller of its requirements for the Goods, including, where applicable, design specifications, and is responsible for any discrepancies, errors or omissions in drawings, documentation or other information supplied in writing by it, if any, or between such documents and any of the other documents forming part of this Agreement. Xxxxx agrees that the design specifications and requirements described in Xxxxx’s documents delivered to Seller correctly represent Xxxxx’s requirements for the Goods as advised to Seller, and acknowledges that Seller’s supply of the Goods will be based on such design specification and requirements. 2.2. It is Buyer’s sole responsibility to ensure that its premises are safe and suitable for the installation and operation of the Goods or performance of any associated services. When requested and appropriate, and at Buyer’s cost, Seller shall, prior to delivery of the Goods, inspect the relevant premises to confirm that the premises are suitable for the installation and operation of the Goods and, if Seller performs such inspection and determines that any aspect of any inspected premises is not suitable for the installation and operation of the Goods, Seller shall provide Buyer with such information in writing and such assistance as may be necessary to enable Buyer at its own cost to prepare the premises so that they are suitable for the installation and operation of the Goods. 2.3. Buyer shall allow the authorized personnel of Seller access to its premises during normal working hours for the purpose of performing its obligations under this Agreement. 2.4. If Seller is performing installation, oversight or commissioning services and, in the reasonable opinion of Seller, it is necessary to remove or disconnect any existing equipment of Buyer in order to install or commission the Goods, Seller shall give Buyer reasonable prior notice of such requirements and Buyer shall provide Seller, at Buyer’s cost, with such assistance as is reasonably necessary to facilitate such removal or disconnection. 2.5. Standard terms of sale include two sets of operating instructions in Seller’s standard electronic format. If additional sets or alternative formats are required, they are available at an additional charge. Upon receipt of request for additional sets, a price quotation will be forwarded.

Buyer and Seller Responsibilities. 2.1. 2.1 Buyer shall be responsible for correctly specifying and advising Seller of its requirements for the Goods, including, where applicable, design specifications, specifications and is responsible for any discrepancies, errors or omissions in drawings, documentation or other information supplied in writing by it, if any, or between such documents and any of the other documents forming part of this Agreement. Xxxxx agrees that the design specifications and requirements described in Xxxxx’s documents delivered to Seller correctly represent Xxxxx’s requirements for the Goods as advised to Seller, and acknowledges that Seller’s supply of the Goods will be based on such design specification and requirements. 2.2. 2.2 It is Buyer’s sole responsibility to ensure that its premises are safe and suitable for the installation and operation of the Goods or performance of any associated services. When requested and appropriate, and at Buyer’s cost, Seller shall, prior to delivery of any part of the Goods, Goods inspect the relevant premises to confirm that the premises are suitable for the installation and operation of any part of the Goods and, if Seller performs such inspection and determines that any aspect of any inspected premises is not suitable for the installation and operation of that part of the Goods, Seller shall provide Buyer with such information in writing and such assistance as may be necessary to enable Buyer at its own cost to prepare the premises so that they are suitable for the installation and operation of the Goods. 2.3. 2.3 Buyer shall allow the authorized authorised personnel of Seller access to its premises during normal working hours and upon prior agreement solely for the purpose of performing its obligations under this Agreement. 2.4. 2.4 If Seller is performing installation, oversight or commissioning services and, in the reasonable opinion of Seller, it is necessary to remove or disconnect any existing equipment of Buyer in order to install or commission the Goods, Seller shall give Buyer reasonable prior notice of such requirements and Buyer shall provide Seller, at Buyer’s cost, with such assistance as is reasonably necessary to facilitate such removal or disconnection. 2.5. 2.5 Standard terms of sale include two (2) sets of operating instructions in Seller’s standard electronic format. If additional sets or alternative formats are required, they are available at an additional charge. Upon receipt of a request for additional sets, a price quotation will be forwarded.

Buyer and Seller Responsibilities. 2.1. 2.1 Buyer shall be responsible for correctly specifying and advising Seller of its requirements for the Goods, including, where applicable, design specifications, and is responsible for any discrepancies, errors or omissions in drawings, documentation or other information supplied in writing by it, if any, or between such documents and any of the other documents forming part of this Agreement. Xxxxx Buyer agrees that the design specifications and requirements described in XxxxxBuyer’s documents delivered to Seller correctly represent XxxxxBuyer’s requirements for the Goods as advised to Seller, and acknowledges that Seller’s supply of the Goods will be based on such design specification and requirements. 2.2. 2.2 It is Buyer’s sole responsibility to ensure that its premises are safe and suitable for the installation and operation of the Goods or performance of any associated services. When requested and appropriate, and at Buyer’s cost, Seller shall, prior to delivery of any part of the Goods, Goods inspect the relevant premises to confirm that the premises are suitable for the installation and operation of any part of the Goods and, if Seller performs such inspection and determines that any aspect of any inspected premises is not suitable for the installation and operation of that part of the Goods, Seller shall provide Buyer with such information in writing and such assistance as may be necessary to enable Buyer at its own cost to prepare the premises so that they are suitable for the installation and operation of the Goods. 2.3. 2.3 Buyer shall allow the authorized authorised personnel of Seller access to its premises during normal working hours and upon prior agreement solely for the purpose of performing its obligations under this Agreement. 2.4. 2.4 If Seller is performing installation, oversight or commissioning services and, in the reasonable opinion of Seller, it is necessary to remove or disconnect any existing equipment of Buyer in order to install or commission the Goods, Seller shall give Buyer reasonable prior notice of such requirements and Buyer shall provide Seller, at Buyer’s cost, with such assistance as is reasonably necessary to facilitate such removal or disconnection. 2.5. 2.5 Standard terms of sale include two (2) sets of operating instructions in Seller’s standard electronic format. If additional sets or alternative formats are required, they are available at an additional charge. Upon receipt of a request for additional sets, a price quotation will be forwarded.

Buyer and Seller Responsibilities. 2.1. 2.1 Buyer shall be responsible for correctly specifying and advising Seller of its requirements for the Goods, including, where applicable, design specifications, specifications and is responsible for i s responsiblefor any discrepancies, errors or omissions in drawings, documentation or other information supplied in writing by iti t, if i f any, or between such documents and any of the other documents forming part of this Agreement. Xxxxx agrees that the design specifications and requirements described in Xxxxx’s documents delivered to Seller correctly represent Xxxxx’s requirements for the Goods as advised to Seller, and acknowledges that Seller’s supply of the Goods will be based on such design specification and requirements. 2.2. 2.2 It is i s Buyer’s sole responsibility to ensure that its premises are safe and suitable for the installation and operation of the Goods or performance of any associated services. When requested and appropriate, and at Buyer’s cost, Seller shall, prior to delivery delive ry of any part of the Goods, Goods inspect the relevant premises to confirm that the premises are suitable for the installation and operation of any part of the Goods and, if Seller performs such inspection and determines that any aspect of any inspected premises is not suitable for the installation and operation of that part of the Goods, Seller shall provide Buyer with such information in writing and such assistance as may be necessary to enable Buyer at its own cost to prepare the premises so that they are suitable for the installation and operation of the Goods. 2.3. 2.3 Buyer shall allow the authorized authorised personnel of Seller access to its i ts premises during normal working hours and upon prior agreement solely for the purpose of performing its obligations under this Agreement. 2.4. 2.4 If Seller is performing installation, oversight or commissioning services and, in the reasonable opinion of Seller, it i t is necessary to remove or disconnect any existing equipment of Buyer in order to install or commission the Goods, Seller shall give Buyer reasonable prior notice of such requirements and Buyer shall provide Seller, at Buyer’s cost, with such assistance as is reasonably necessary to facilitate such removal or disconnection. 2.5. 2.5 Standard terms of sale include two (2) sets of operating instructions in Seller’s standard electronic format. If additional sets or alternative formats are required, they are available at an additional charge. Upon receipt of a request for additional sets, a price quotation will be forwarded.

Buyer and Seller Responsibilities. 2.1. 2.1 Buyer shall be responsible for correctly beresponsibleforcorrectly specifying and advising Seller of its requirements for the Goods, including, where applicable, design specifications, specifications and is responsible for responsiblefor any discrepancies, errors or omissions in drawings, documentation or other information supplied in writing by it, if any, or between orbetween such documents and any of the other documents forming part of this Agreement. Xxxxx agrees that the design specifications and requirements described in Xxxxx’s documents delivered to Seller correctly represent Xxxxx’s requirements for the Goods as advised to Seller, and acknowledges that Seller’s supply of the Goods will be based on such design specification and requirements. 2.2. 2.2 It is i s Buyer’s sole responsibility to ensure that its thatits premises are safe and suitable for the installation and operation of the Goods or performance of any associated services. When requested and appropriate, and at Buyer’s cost, Seller shall, prior to delivery of any part of the Goods, inspect the Goods inspectthe relevant premises to confirm that the premises thepremises are suitable for the installation and operation of any part of the Goods and, if Seller performs Sellerperforms such inspection and determines that any aspect of any inspected premises is not suitable for the installation and operation of that part of the Goods, Seller shall provide Buyer with such information in writing and such assistance as may be necessary to enable Buyer at its own cost to prepare the premises thepremises so that they are suitable for the forthe installation and operation of the Goods. 2.3. 2.3 Buyer shall allow the authorized authorised personnel of Seller access to its i ts premises during normal working hours and upon prior agreement solely for the purpose of performing its obligations under this Agreement. 2.4. 2.4 If Seller is performing installation, oversight or commissioning services and, in the reasonable opinion of Seller, it is necessary to remove or disconnect any existing equipment of Buyer in order to install or commission the Goods, Seller shall give Buyer reasonable prior notice of such requirements and Buyer shall provide Seller, at Buyer’s cost, with such assistance as is reasonably necessary to facilitate such removal or disconnection. 2.5. 2.5 Standard terms of sale include two (2) sets of operating instructions in Seller’s standard electronic format. If additional sets or alternative formats are required, they are available at an additional charge. Upon receipt of a request for additional sets, a price quotation will be forwarded.

Buyer and Seller Responsibilities. 2.1. 2.1 Buyer shall be responsible for correctly specifying and advising Seller of its requirements for the Goods, including, including where applicable, design specifications, specifications and is responsible for any discrepancies, errors or omissions in drawings, documentation or other information supplied in writing by it, if any, or between such documents and any of the other documents forming part of this Agreement. Xxxxx agrees that the design specifications and requirements described in Xxxxx’s documents delivered to Seller correctly represent XxxxxBuyer’s requirements for the Goods as advised to Seller, and acknowledges andacknowledges that Seller’s supply of the Goods will be based on such design specification and specificationand requirements. 2.2. 2.2 It is Buyer’s sole responsibility to ensure that its premises are safe and suitable for the installation and operation of the Goods or performance of any associated anyassociated services. When requested and appropriateWhenrequested andappropriate, and at Buyer’s cost, Seller shall, prior to delivery of the Goods, deliveryof anypart ofthe Goods inspect the relevant premises to confirm that the premises are suitable for the installation and operation andoperationof any part of the Goods and, if Seller performs such inspection suchinspection and determines that any aspect anyaspect of any inspected premises is not suitable for the installation and operation of that part of the Goods, Seller shall provide Buyer with such information in writing and such suchinformation inwriting andsuch assistance as may be necessary to enable Buyer at its own cost to prepare the premises so that they are suitable for the installation and operation of installationandoperationof the Goods. 2.3. 2.3 Buyer shall allow the authorized authorised personnel of Seller access to its premises during normal working hours and upon prior agreement solely for the purpose of performing its obligations under this Agreement. 2.4. 2.4 If Seller is performing installation, oversight or commissioning services and, in the reasonable opinion of Seller, it is necessary to necessaryto remove or disconnect any existing anyexisting equipment of Buyer in order to install or commission the Goods, Seller shall give Buyer reasonable prior notice of such requirements suchrequirements and Buyer shall provide Seller, at Buyer’s cost, with such assistance as is reasonably necessary to facilitate such removal or disconnection.shall 2.5. 2.5 Standard terms of sale include two (2) sets of operating instructions in Seller’s standard electronic format. If additional sets or alternative formats are required, they are available at an additional charge. Upon receipt of a request for additional setsadditionalsets, a price quotation will quotationwill be forwarded.

Buyer and Seller Responsibilities. 2.1. 2.1 Buyer shall be responsible for correctly specifying and advising Seller of its requirements for the Goods, including, including where applicable, design specifications, specifications and is responsible for any discrepancies, errors or omissions in drawings, documentation or other information supplied in writing by it, if any, or between such documents and any of the other documents forming part of this Agreement. Xxxxx agrees that the design specifications and requirements described in Xxxxx’s documents delivered to Seller correctly represent Xxxxx’s requirements for the Goods as advised to Seller, and acknowledges that Seller’s supply of the Goods will be based on such design specification and requirements. 2.2. 2.2 It is Buyer’s sole responsibility to ensure that its premises are safe and suitable for the installation and operation of the Goods or performance of any associated services. When requested and appropriate, and at Buyer’s cost, Seller shall, prior to delivery of any part of the Goods, Goods inspect the relevant premises to confirm that the premises are suitable for the installation and operation of any part of the Goods and, if Seller performs such inspection and determines that any aspect of any inspected premises is not suitable for the installation and operation of that part of the Goods, Seller shall provide Buyer with such information in writing and such assistance as may be necessary to enable Buyer at its own cost to prepare the premises so that they are suitable for the installation and operation of the Goods. 2.3. 2.3 Buyer shall allow the authorized authorised personnel of Seller access to its premises during normal working hours and upon prior agreement solely for the purpose of performing its obligations under this Agreement. 2.4. 2.4 If Seller is performing installation, oversight or commissioning services and, in the reasonable opinion of Seller, it is necessary to remove or disconnect any existing equipment of Buyer in order to install or commission the Goods, Seller shall give Buyer reasonable prior notice of such requirements and Buyer shall provide Seller, at Buyer’s cost, with such assistance as is reasonably necessary to facilitate such removal or disconnection. 2.5. 2.5 Standard terms of sale include two (2) sets of operating instructions in Seller’s standard electronic format. If additional sets or alternative formats are required, they are available at an additional charge. Upon receipt of a request for additional sets, a price quotation will be forwarded.