Certificate of Completion and Possession Sample Clauses

Certificate of Completion and Possession. 6.3.1 The Purchaser agrees to meet the Vendor’s representative prior to the Closing Date to inspect and to list all items remaining uncompleted at the time of such inspection and mutually agreed deficiencies in the dwelling, on the Vendor’s certificate, which certificate shall be executed by both the Purchaser and the Vendor’s representative forthwith after such inspection, and shall constitute the Vendor’s only undertaking with respect to incomplete or deficient work or in respect of any aspect of the construction of the dwelling (the "Pre-delivery Inspection Form"). The Purchaser further agrees that the Vendor shall have the right to enter upon the Property after the Closing Date, if necessary, in order to complete such items as are included in the Pre-delivery Inspection Form. Such work shall be completed by the Vendor within a reasonable time after the Closing Date, having regard to weather conditions and the availability of supplies and labour. The Purchaser acknowledges and agrees that no further request for completion or correction of items may be maintained by the Purchaser, and this shall serve as a good and sufficient release of the Vendor in that regard.
Sample 1Sample 2Sample 3See All (9)
AutoNDA by SimpleDocs
Certificate of Completion and Possession. The Purchaser acknowledges and agrees that notwithstanding anything to the contrary herein contained, the Purchaser will not be permitted to take occupancy of the Dwelling, and the Vendor shall have no obligation to close the transaction of Purchase and Sale herein provided for, unless and until the Purchaser executes the said Certificate, and in addition to, and without limiting the recourse to any other right, cause of action and/or remedy which the Vendor may have under this Agreement, at law and/or in equity, the Vendor may terminate this Agreement and the Vendor shall be entitled to retain that portion of the deposit which has to that point been paid as liquidated damages and not as a penalty and the Purchaser shall have no further right or interest in the Land or the Dwelling.
Sample 1Sample 2Sample 3See All (4)

Related to Certificate of Completion and Possession

  • Certificate of Completion The Interconnection Customer shall provide the EDC with a completed copy of the Interconnection Agreement Certificate of Completion, including evidence of the electrical inspection performed by the local authority having jurisdiction. The evidence of completion of the electrical inspection may be provided on inspection forms used by local inspecting authorities. The Interconnection request shall not be finally approved until the EDC’s representative signs the Interconnection Agreement Certificate of Completion.

  • Certificate of Substantial Completion The Date of Substantial Completion of the Work or designated portion thereof is the Date certified by the City when construction is sufficiently complete, in accordance with the Contract Documents, so the City of Roanoke, Virginia (City or Owner) can occupy or utilize the Work or designated portion thereof for the use for which it is intended, as expressed in the Contract Documents. ITB NO.: PROJECT: CONTRACTOR: PROJECT OR DESIGNATED PORTION SHALL INCLUDE: . The Work or portion thereof designated above performed under this Contract has been reviewed and found to be substantially complete. The Date of Substantial Completion of the Project or portion thereof designated above is hereby established as . The City will assume possession thereof at a.m./p.m. on that date. A list of items ("punch list"), prepared by the A/E and/or Director, Department of Public Works, to be completed or corrected by the Contractor, is attached hereto. The failure to include any items on such list does not alter the responsibility of the Contractor to complete all Work in accordance with the Contract Documents. The Contractor will complete any portion of the Work that is not substantially complete and will complete or correct the work on the punch list in accordance with the Contract Documents. The establishment of a date of substantial completion and/or the acceptance of the Work or designated portion thereof does not relieve the Contractor of any responsibility for any faulty materials or workmanship or operate to relieve the Contractor or its Surety from any obligation under the Contract with the City or the Performance Bond or Labor and Material Payment Bond. This Certificate is subject to the terms and conditions of the Contract Documents, including but not limited to Section 20.8 of the General Conditions. Contractor By Date City of Roanoke, Virginia City By Date CITY OF ROANOKE, VIRGINIA AFFIDAVIT OF PAYMENT OF CLAIMS By: (Insert Exact Name and Address of Firm) This day personally appeared before me, , a Notary Public in and for the City (County) of , and, being by me first duly sworn states that all subcontractors and suppliers of labor and materials have been paid all sums due them for work performed or materials furnished in the performance of the Contract between the City of Roanoke, Virginia, and ,Contractor, dated , 20 , for or arrangements have been made by the Contractor satisfactory to such subcontractors and suppliers with respect to the payment of such sums as may be due from the Contractor to the subcontractors and suppliers. CONTRACTOR: BY: PRINTED OR TYPED NAME AND TITLE: COMMONWEALTH OF VIRGINIA CITY/COUNTY OF I, , a Notary Public in and for the Commonwealth of Virginia, do hereby certify that , whose name is signed to the foregoing, has subscribed, sworn to and acknowledged the same before me this day of , 20 . Seal: Notary Public Registration #: My Commission Expires: CITY OF ROANOKE, VIRGINIA

  • Certificate of Compliance The Servicer shall deliver to the Note Issuer, the Note Trustee, the Certificate Trustee and the Rating Agencies on or before March 31 of each year, commencing March 31, 2006 to and including the March 31 succeeding the Retirement of the Notes, an Officer’s Certificate substantially in the form of Exhibit A hereto (a “Certificate of Compliance”), stating that: (i) a review of the activities of the Servicer during the twelve months ended the preceding December 31 (or, in the case of the first Certificate of Compliance to be delivered on or before March 31, 2006, the period of time from the date of this Agreement until December 31, 2005) and of its performance under this Agreement has been made under such Responsible Officer’s supervision, and (ii) to the best of such Responsible Officer’s knowledge, based on such review, the Servicer has fulfilled all of its obligations under this Agreement in all material respects throughout such twelve months (or, in the case of the Certificate of Compliance to be delivered on or before March 31, 2006, the period of time from the date of this Agreement until December 31, 2005), or, if there has been a failure to fulfill any such obligation in any material respect, specifying each such failure known to such Responsible Officer and the nature and status thereof.

  • Final Certificate, Design Professional’s Certificate of Final Completion The Certificate issued by the Design Professional stating that all work has been completed in accordance with the terms of the Contract Documents. See Section 6,

  • At Substantial Completion and Final Completion the Contractor shall provide a certification letter certifying that the Work does not contain asbestos as required by the UTUGCs.

  • Certificate of Conformance At Buyer’s request, a Certificate of Conformance stating the Products conform to all Order requirements shall accompany each shipment. Seller shall have available for review all sub-tier certifications for goods and processes that support the shipment.

  • Certification of Completion Certification of completion of the program will be contingent upon Resident successfully completing the core requirements of the Program, returning all property of the Medical Center such as books, equipment, etc., and having settled any other professional or financial obligations to the Medical Center. The certificate will be issued in accordance with the provisions of the ASHP Regulations on Accreditation of Pharmacy Residencies and signed by the RPD and the Chief Executive Officer of the organization. A certificate will not be issued to anyone who does not complete the program’s requirements. Core requirements to successfully complete the program include: • Possess a valid pharmacist license from the Pennsylvania State Board of Pharmacy by October 31st of the residency year. • Successful completion of core learning experiences and required longitudinal learning experiences as defined in the learning experience descriptions • Completion of all R1 goals/objectives with a status of achieved by the end of the residency. Completion of 100% of the remaining goals/objectives for the program with at least 50% of the objectives having a status as achieved. All objectives must have a minimum status of satisfactory progress. • All evaluations must be completed in accordance with ASHP Accreditation Standard as outlined in the Resident Agreement • Completion of pharmacokinetic certification by October 31 of residency year • Completion of inpatient anticoagulation certification by October 31 of residency year. • Completion of major project, which includes meeting all project deadlines and submission of written manuscript of completed project to the RAC. • Assigned projects (MUE, drug review, class review, and management project) have been completed • Presentation of at least one major CME program. • Completion of minimum staffing requirements as described in section 2.7 • Adherence to the organization’s attendance standards and as described in this document under Exhibit A.

  • FINAL COMPLETION AND FINAL PAYMENT 9.9.1 Upon receipt of written notice that the Work is ready for final inspection and acceptance and upon receipt of a final Application for Payment, the Architect will promptly make such inspection and, when he or she finds the Work acceptable under the Contract Documents and the Contract fully performed, he or she will promptly issue a final Certificate for Payment stating that to the best of his / her knowledge, information and belief, and on the basis of his or her observations and inspections, the Work has been completed in accordance with the terms and conditions of the Contract Documents and that the entire balance found to be due the Contractor, and noted in said final Certificate, is due and payable. The Architect's final Certificate for Payment will constitute a further representation that the Contractor has fulfilled the conditions entitling him or her to final payment as set forth in Subparagraph 9.9.2 of these General Conditions.

  • Certificate of Limited Partnership The General Partner has caused the Certificate of Limited Partnership to be filed with the Secretary of State of the State of Delaware as required by the Delaware Act. The General Partner shall use all reasonable efforts to cause to be filed such other certificates or documents that the General Partner determines to be necessary or appropriate for the formation, continuation, qualification and operation of a limited partnership (or a partnership in which the limited partners have limited liability) in the State of Delaware or any other state in which the Partnership may elect to do business or own property. To the extent the General Partner determines such action to be necessary or appropriate, the General Partner shall file amendments to and restatements of the Certificate of Limited Partnership and do all things to maintain the Partnership as a limited partnership (or a partnership or other entity in which the limited partners have limited liability) under the laws of the State of Delaware or of any other state in which the Partnership may elect to do business or own property. Subject to the terms of Section 3.4(a), the General Partner shall not be required, before or after filing, to deliver or mail a copy of the Certificate of Limited Partnership, any qualification document or any amendment thereto to any Limited Partner.

  • CERTIFICATE OF ACCEPTANCE Upon successful completion of the Technical Acceptance Process, the Buyer will, on or before the Delivery Date, sign and deliver to the Seller a certificate of acceptance in respect of the Aircraft in the form of Exhibit D (the “Certificate of Acceptance”).

Time is Money Join Law Insider Premium to draft better contracts faster.