CFT Object Code Sample Clauses

CFT Object Code. Since FLT firmware cannot test though the Nortel Networks MBP, a special test environment was created to verify this functionality. This test card is based on a hardware board developed by Nortel Networks with modifications by Airvana to support the DO application. These modifications consist of minor rework to the Nortel Networks card coupled with an extensive FPGA that was developed by Airvana to recognize a DO signal and source a signal that could be interpreted by the DOM-A Qualcomm chipset. While this was designed for the DOM-0, it will likely be possible for Nortel Networks to use much of this directly with minimal modification for Rev A (requires further investigation). The D0-CFT card works in conjunction with a special software load based on Airvana's DO application. This special "design load" sources and verifies signals to and from the CFT card. Airvana will do a special software development for DOM-A to provide this functionality in object code (no DOM-A source code will be provided). This object code will run on the DOM-A and will be provided to Nortel Networks on or before March 31, 2006. Labview code then interfaces to the DOM-A and CFT card to coordinate testing of all sectors. Airvana has developed a special fixture to hold DOM-0 as well as the CFT card, allowing efficient testing on quantities of DOM-0. Accordingly, the CFT transfer package will consist of: - Rework instructions based on usage of Nortel Networks test card hw - CFT card's FPGA source code to be provided on or before January 1, 2006 - Design guidance and information for replicating Airvana's DOM test fixtures to support CFT level test - Labview scripts developed for DOM-0 CFT level testing (NT will need to modify for DOM-A) - Up to one week of Training at Airvana on CFT related topics - Development of DOM-A CFT "designer load" software in object code
Sample 1Sample 2
AutoNDA by SimpleDocs

Related to CFT Object Code

  • Advertising Materials; Filed Documents (a) Advertising and sales literature with respect to any Fund prepared by the Company or its agents for use in marketing its Contracts will be submitted to that Fund or its designee for review before such material is submitted to any regulatory body for review. No such material shall be used if the Fund or its designee reasonably objects to such use in writing, transmitted by facsimile within two business days after receipt of such material.

  • Update of Schedules Schedules 7.05(b) (in respect of the lists of Patents, Copyrights and Trademarks under Section 7.05(b)(i) only), 7.05(c), 7.06, and 7.16, may be updated by Borrower prior to each Borrowing Date to insure the continued accuracy of such Schedule as of such Borrowing Date, by Borrower providing to the Lenders, in writing (including via electronic means), a revised version of such Schedule in accordance with the provisions of Section 12.02. Each such updated Schedule shall be effective immediately upon the receipt thereof by the Lenders.

  • Source Code Escrow On the date hereof, Company shall deliver to an independent third party escrow agent, selected and designated by AMEX and approved by Company (such approval not to be unreasonably withheld) ("Escrow Agent"), for deposit in accordance with an escrow agreement among the Escrow Agent and the parties hereto and substantially in the form attached as Exhibit E ("Escrow Agreement"), a current and complete copy of the source code (the "Source Code") for the Domain Name and any other materials required to operate the Source Code (the "Escrow Materials"). Within [ ** ] of the installation of any new update to the Service (or any other substantial modification to the Source Code, the Domain Name or the Service) or within [ ** ] of the last deposit hereunder, whichever is sooner, Company shall deliver to the Escrow Agent, for deposit in accordance with such Escrow Agreement, any and all changes to the Escrow Materials which correspond to changes, if any, made to the corresponding Escrow Material or shall notify Escrow Agent that no changes were made during the preceding period. All materials deposited hereunder shall be considered "Escrow Materials" as the term is used herein. In the event of (i) the Company's insolvency (as defined in Section 16(e)) or (ii) the Company's material breach of the terms of this Agreement specifically because of its gross negligence or willful misconduct and such breach is not fully remedied within thirty (30) days of AMEX's notice to Company, then notwithstanding any other rights and remedies to which AMEX may be entitled, AMEX shall immediately have the right to obtain a copy of the Escrow Materials from the Escrow Agent upon written notice as provided in the Escrow Agreement for use in continued provision of the Service. AMEX shall have the right, at any time upon at least ten (10) days' written notice to Company and Escrow Agent, to select and designate a new escrow agent to replace the Escrow Agent hereunder. Upon such notice, Escrow Agent shall completely, safely and securely transfer the Escrow Materials to the new escrow agent (which will then become the "Escrow Agent" hereunder) and confirm such transfer in writing to AMEX and Company. ** INDICATES CONFIDENTIAL TREATMENT REQUESTED.

  • Technical Specifications Each Bloom System is an integrated system comprised of a fuel cell stack assembly and associated balance of plant components that converts a fuel into electricity using electrochemical means that (i) has a Nameplate Capacity of at least 0.5 kilowatts of electricity using an electrochemical process and (ii) has an electricity-only generation efficiency greater than thirty percent (30%).

  • Product Specifications The Company agrees that all Products sold to Xxxx hereunder shall conform to the respective specifications set forth on Schedule A or to such other specifications as are from time to time agreed upon by the Parties.

  • Computational Materials and ABS Term Sheets (a) Not later than 10:30 a.m., New York City time, on a date no later than four business days before delivery of the Final Prospectus to the Underwriter, the Underwriter shall deliver to the Company five complete copies of all materials provided by the Underwriter to prospective investors in the Securities which constitute either (i) "Computational ------------- Materials" within the meaning of the no-action letter dated May 20, 1994 --------- issued by the Division of Corporation Finance of the Commission to Xxxxxx, Xxxxxxx Acceptance Corporation I, Xxxxxx, Peabody & Co. Incorporated, and Xxxxxx Structured Asset Corporation and the no-action letter dated May 27, 1994 issued by the Division of Corporation Finance of the Commission to the Public Securities Association (together, the "Xxxxxx Letters") or (ii) "ABS -------------- --- Term Sheets" within the meaning of the no-action letter dated February 17, ----------- 1995 issued by the Division of Corporation Finance of the Commission to the Public Securities Association (the "PSA Letter" and together with the ---------- Xxxxxx Letters, the "No-Action Letters"), if the filing of such materials ----------------- with the Commission is a condition of the relief granted in such letters. In the case of any such materials that constitute "Collateral Term Sheets" ---------------------- within the meaning of the PSA Letter, if such Collateral Term Sheets have not previously been delivered to the Company as contemplated by Section 10(b)(i) below, five complete copies of such Collateral Term Sheets shall be delivered by the Underwriter to the Company no later than 10:30 a.m., New York City time, on the first business day following the date on which such Collateral Term Sheets were initially provided to a potential investor. Each delivery of Computational Materials, Collateral Term Sheets and/or ABS Term Sheets to the Company pursuant to this paragraph (a) shall be effected by delivering four copies of such materials to counsel for the Company on behalf of the Company at the address specified in Section 15 hereof and one copy of such materials to the Company.

  • Delivery Schedule The scheduled months of delivery of the Aircraft are listed in the attached Table 1. Exhibit B describes certain responsibilities for both Customer and Boeing in order to accomplish the delivery of the Aircraft.

  • Title Objections Seller shall request Escrow Agent to cause to be delivered to Buyer a preliminary title report (the "Preliminary Report") from a title company affiliated with the Escrow Agent (the "Title Company"), showing the status of Seller’s title to the Property, together with complete and legible copies of all documents shown therein as exceptions to title ("Exceptions"). Buyer shall have until the date that is five (5) days after the Title Company delivers the Preliminary Report and Exceptions to Buyer within which to give notice in writing to Seller of any objection to such title or to any liens or encumbrances affecting the Property. Within five (5) days after receipt of such notice from Buyer, Seller shall give Buyer written notice of whether it is willing and able to remove the objected-to Exceptions. Without the need for objection by Buyer, Seller shall, with respect to liens and encumbrances that can be satisfied and released by the payment of money, eliminate such exceptions to title on or before Closing. Within five (5) days after receipt of such notice from Seller (the "Title Contingency Date"), Buyer shall elect whether to: (i) purchase the Property subject to those objected-to Exceptions which Seller is not willing or able to remove; or (ii) terminate this Agreement. If Buyer fails to give Seller notice of Buyer’s election, then such inaction shall be deemed to be Buyer’s election to terminate this Agreement. On or before the Closing Date (defined below), Seller shall remove all Exceptions to which Buyer objects and which Seller agrees, or is deemed to have agreed, Seller is willing and able to remove. All remaining Exceptions set forth in the Preliminary Report and those Exceptions caused by or agreed to by Buyer shall be deemed "Permitted Exceptions."

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • State Specific Contract Form Observe the state of the Seller on the Contract, if the Seller lists an address in Alaska, Arkansas, Delaware, North Carolina, Virginia, Maryland, Montana, Connecticut, Vermont, Louisiana or Mississippi, confirm the form number on the Contract is on the List of Approved Contract Forms, for the corresponding state. Representation

Time is Money Join Law Insider Premium to draft better contracts faster.