Coalspur Declaration Sample Clauses

Coalspur Declaration. Coalspur represents and warrants to KCE that it would not have entered into this agreement without the benefit of this clause 12.2 and it would not have entered into and continued the negotiations and conducted due diligence into KCE leading up to this agreement unless Coalspur had a reasonable expectation that KCE would agree to enter into a clause of this kind.
Sample 1
AutoNDA by SimpleDocs

Related to Coalspur Declaration

  • Operating Agreement The Borrower will not amend, modify, waive or terminate any provision of its operating agreement without the prior written consent of the Administrative Agent.

  • Condominiums/Planned Unit Developments If the Mortgaged Property is a condominium unit or a planned unit development (other than a de minimis planned unit development) such condominium or planned unit development project such Mortgage Loan was originated in accordance with, and the Mortgaged Property meets the guidelines set forth in the Originator's Underwriting Guidelines;

  • Operating Partnership Agreement The Operating Partnership Agreement, in substantially the form attached hereto as Exhibit B, shall have been executed and delivered by the partners of the Operating Partnership and shall be in full force and effect and, except as contemplated by Section 2.03 or the other Formation Transaction Documents, shall not have been amended or modified.

  • Development Agreement As soon as reasonably practicable following the ISO’s selection of a transmission Generator Deactivation Solution, the ISO shall tender to the Developer that proposed the selected transmission Generator Deactivation Solution a draft Development Agreement, with draft appendices completed by the ISO to the extent practicable, for review and completion by the Developer. The draft Development Agreement shall be in the form of the ISO’s Commission-approved Development Agreement for its reliability planning process, which is in Appendix C in Section 31.7 of Attachment Y of the ISO OATT, as amended by the ISO to reflect the Generator Deactivation Process. The ISO and the Developer shall finalize the Development Agreement and appendices as soon as reasonably practicable after the ISO’s tendering of the draft Development Agreement. For purposes of finalizing the Development Agreement, the ISO and Developer shall develop the description and dates for the milestones necessary to develop and construct the selected project by the required in-service date identified in the Generator Deactivation Assessment, including the milestones for obtaining all necessary authorizations. Any milestone that requires action by a Connecting Transmission Owner or Affected System Operator identified pursuant to Attachment P of the ISO OATT to complete must be included as an Advisory Milestone, as that term is defined in the Development Agreement. If the ISO or the Developer determines that negotiations are at an impasse, the ISO may file the Development Agreement in unexecuted form with the Commission on its own, or following the Developer’s request in writing that the agreement be filed unexecuted. If the Development Agreement is executed by both parties, the ISO shall file the agreement with the Commission for its acceptance within ten (10) Business Days after the execution of the Development Agreement by both parties. If the Developer requests that the Development Agreement be filed unexecuted, the ISO shall file the agreement at the Commission within ten (10) Business Days of receipt of the request from the Developer. The ISO will draft, to the extent practicable, the portions of the Development Agreement and appendices that are in dispute and will provide an explanation to the Commission of any matters as to which the parties disagree. The Developer will provide in a separate filing any comments that it has on the unexecuted agreement, including any alternative positions it may have with respect to the disputed provisions. Upon the ISO’s and the Developer’s execution of the Development Agreement or the ISO’s filing of an unexecuted Development Agreement with the Commission, the ISO and the Developer shall perform their respective obligations in accordance with the terms of the Development Agreement that are not in dispute, subject to modification by the Commission. The Connecting Transmission Owner(s) and Affected System Operator(s) that are identified in Attachment P of the ISO OATT in connection with the selected transmission Generator Deactivation Solution shall act in good faith in timely performing their obligations that are required for the Developer to satisfy its obligations under the Development Agreement.

  • One-Way Interconnection Trunks 2.3.1 Where the Parties use One-Way Interconnection Trunks for the delivery of traffic from Onvoy to Frontier, Onvoy, at Xxxxx’s own expense, shall: 2.3.1.1 provide its own facilities for delivery of the traffic to the technically feasible Point(s) of Interconnection on Frontier’s network in a LATA; and/or 2.3.1.2 obtain transport for delivery of the traffic to the technically feasible Point(s) of Interconnection on Frontier’s network in a LATA (a) from a third party, or, (b) if Frontier offers such transport pursuant to a Frontier access Tariff, from Frontier. 2.3.2 For each Tandem or End Office One-Way Interconnection Trunk group for delivery of traffic from Onvoy to Frontier with a utilization level of less than sixty percent (60%) for final trunk groups and eighty-five percent (85%) for high usage trunk groups, unless the Parties agree otherwise, Onvoy will promptly submit ASRs to disconnect a sufficient number of Interconnection Trunks to attain a utilization level of approximately sixty percent (60%) for all final trunk groups and eighty-five percent (85%) for all high usage trunk groups. In the event Onvoy fails to submit an ASR to disconnect One-Way Interconnection Trunks as required by this Section, Frontier may disconnect the excess Interconnection Trunks or bill (and Onvoy shall pay) for the excess Interconnection Trunks at the rates set forth in the Pricing Attachment. 2.3.3 Where the Parties use One-Way Interconnection Trunks for the delivery of traffic from Frontier to Onvoy, Frontier, at Frontier’s own expense, shall provide its own facilities for delivery of the traffic to the technically feasible Point(s) of Interconnection on Frontier’s network in a LATA.

  • Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters). 2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance. 2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks. 2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire. 2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety

  • Membership Agreement Membership in USA Gymnastics is a privilege and may be (i) denied, withheld, or non-renewed at any time by USA Gymnastics and/or (ii) suspended or terminated in accordance with USA Gymnastics’ bylaws, policies and standards. You agree that USA Gymnastics has the right to deny, withhold, non-renew, suspend or terminate your membership if you engage in any sexual misconduct, or if USA Gymnastics has reason to believe you pose a threat to the safety of athletes or other members. You have read, understand and agree to be bound by this Agreement, the USA Gymnastics bylaws, Safe Sport Policy, SafeSport Investigation & Resolution Procedures, and Code of Ethical Conduct. You are bound by all safe sport rules, policies and procedures whether published by USA Gymnastics or the U.S. Center for Safe Sport (“Center”), as well as all applicable state, federal, and local laws, including applicable criminal laws. You consent to the jurisdiction of the Center. Any discipline imposed by the Center or USA Gymnastics extends to your participation in all aspects of the Olympic Movement. You agree that any disciplinary measure, whether interim or final, whether imposed before or after the date of this Agreement, whether expired or in effect, may be posted on our website or otherwise publicly published and may include information identifying you and describing the misconduct alleged. You authorize USA Gymnastics and its members to disclose, in good faith, any information or honestly held opinions about you, including without limitation any membership records, USA Gymnastics SafeSport or Center information, or other disciplinary information, with any current or potential employer of yours. You further agree that USA Gymnastics may disclose any information provided by, or about, you as USA Gymnastics determines is reasonably necessary to comply with any law, regulation, legal process, or any request by any governmental body or agency, the Center, or the United States Olympic and Paralympic Committee (“USOPC”). TO THE MAXIMUM EXTENT ALLOWED BY LAW, YOU FOREVER RELEASE AND DISCHARGE USA GYMNASTICS AND/OR ITS MEMBERS FROM ANY AND ALL LOSS, LIABILITY, DAMAGE OR CLAIM OF ANY KIND OR NATURE, WHETHER KNOWN OR UNKNOWN, WHETHER IN LAW OR IN EQUITY, WHETHER NOW EXISTING OR ACCRUING IN THE FUTURE, ARISING OUT OF OR IN CONNECTION WITH ANY INFORMATION OR OPINIONS DISCLOSED IN ACCORDANCE WITH THIS SECTION.

  • Partnership Agreements Each of the partnership agreements, declarations of trust or trust agreements, limited liability company agreements (or other similar agreements) and, if applicable, joint venture agreements to which the Company or any of its subsidiaries is a party has been duly authorized, executed and delivered by the Company or the relevant subsidiary, as the case may be, and constitutes the valid and binding agreement of the Company or such subsidiary, as the case may be, enforceable in accordance with its terms, except as the enforcement thereof may be limited by (A) the effect of bankruptcy, insolvency or other similar laws now or hereafter in effect relating to or affecting creditors’ rights generally or (B) the effect of general principles of equity, and the execution, delivery and performance of such agreements did not, at the time of execution and delivery, and does not constitute a breach of or default under the charter or bylaws, partnership agreement, declaration of trust or trust agreement, or limited liability company agreement (or other similar agreement), as the case may be, of the Company or any of its subsidiaries or any of the Agreements and Instruments or any law, administrative regulation or administrative or court order or decree.

  • Two-Way Interconnection Trunks 2.4.1 Where the Parties have agreed to use Two-Way Interconnection Trunks for the exchange of traffic between Verizon and PCS, PCS shall order from Verizon, and Verizon shall provide, the Two-Way Interconnection Trunks and the Entrance Facility, on which such Trunks will ride, and transport and multiplexing, in accordance with the rates, terms and conditions set forth in this Agreement and Verizon’s applicable Tariffs. 2.4.2 Prior to ordering any Two-Way Interconnection Trunks from Verizon, PCS shall meet with Verizon to conduct a joint planning meeting (“Joint Planning Meeting”). At that Joint Planning Meeting, each Party shall provide to the other Party originating Centium Call Second (Hundred Call Second) information, and the Parties shall mutually agree on the appropriate initial number of Two-Way End Office and Tandem Interconnection Trunks and the interface specifications at the Point of Interconnection (POI). Where the Parties have agreed to convert existing One-Way Interconnection Trunks to Two-Way Interconnection Trunks, at the Joint Planning Meeting, the Parties shall also mutually agree on the conversion process and project intervals for conversion of such One-Way Interconnection Trunks to Two-Way Interconnection Trunks. 2.4.3 Two-Way Interconnection Trunks shall be from a Verizon End Office or Tandem to a mutually agreed upon POI. 2.4.4 On a semi-annual basis, PCS shall submit a good faith forecast to Verizon of the number of End Office and Tandem Two-Way Interconnection Trunks that PCS anticipates Verizon will need to provide during the ensuing two (2) year period to carry traffic from PCS to Verizon and from Verizon to PCS. PCS’s trunk forecasts shall conform to the Verizon CLEC trunk forecasting guidelines as in effect at that time. 2.4.5 The Parties shall meet (telephonically or in person) from time to time, as needed, to review data on End Office and Tandem Two-Way Interconnection Trunks to determine the need for new trunk groups and to plan any necessary changes in the number of Two-Way Interconnection Trunks. 2.4.6 Two-Way Interconnection Trunks shall have SS7 Common Channel Signaling. The Parties agree to utilize B8ZS and Extended Super Frame (ESF) DS1 facilities, where available. 2.4.7 With respect to End Office Two-Way Interconnection Trunks, both Parties shall use an economic Centium Call Second (Hundred Call Second) equal to five (5). 2.4.8 Two-Way Interconnection Trunk groups that connect to a Verizon access Tandem shall be engineered using a design blocking objective of Xxxx-Xxxxxxxxx B.005 during the average time consistent busy hour. Two-Way Interconnection Trunk groups that connect to a Verizon local Tandem shall be engineered using a design blocking objective of Xxxx-Xxxxxxxxx B.01 during the average time consistent busy hour. Verizon and PCS shall engineer Two-Way Interconnection Trunks using BOC Notes on the LEC Networks SR-TSV-002275. 2.4.9 The performance standard for final Two-Way Interconnection Trunk groups shall be that no such Interconnection Trunk group will exceed its design blocking objective (B.005 or B.01, as applicable) for three

  • Interconnection Agreement Seller shall comply with the terms and conditions of the Interconnection Agreement.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!