Common use of Commissioning and M&V Plan Clause in Contracts

Commissioning and M&V Plan. (i) DCAMM’s third party commissioning agent will create a commissioning plan and a measurement and verification (M&V) plan to be provided to CONTRACTOR by DCAMM prior to the acceptance of the final Design Deliverable. CONTRACTOR shall provide to DCAMM any comments on the commissioning plan and the M&V plan within thirty (30) days of receipt of each respective plan or as part of final Design Deliverable, whichever is earlier, provided that CONTRACTOR shall have at least ten (10) days to provide such comments. The commissioning plan will: describe how performance testing is to be conducted for each element and total system of the installed New Equipment/Systems; designate the commissioning team and their roles and responsibilities, include the pre-functional and functional performance test forms and commissioning schedule as it relates to the overall Design/Construction Schedule; and provide a description of how system deficiencies will be recorded and corrected before Project closeout. The M&V plan will: describe how the Energy Savings will be verified for the Project in a transparent manner; describe the pre- installation measurement or data logging of energy consumption for each piece of equipment being installed, the recommended permanent metering equipment to be installed, and the approach for post- installation measurement of energy consumption of New Equipment/Systems; and include the calculation methodology for Energy Savings based on measured and stipulated variables. (ii) Design Deliverables shall not be considered completed and CONTRACTOR may not commence Installation Services for any New Equipment/Systems without CONTRACTOR’s response to the draft commissioning plan and M&V plan, unless otherwise specifically authorized by DCAMM in writing. (iii) DCAMM will provide CONTRACTOR with a final commissioning plan and M&V plan following review of CONTRACTOR’s comments on the draft plans by DCAMM’s third party agent. CONTRACTOR shall comply with the requirements of the final commissioning plan and M&V plan provided by DCAMM, including, without limitation, performing any and all testing requirements indicated to be the responsibility of CONTRACTOR or Subcontractors and coordinating schedules with DCAMM, DCAMM’s third party agent, and Subcontractors as necessary for any required testing.

Commissioning and M&V Plan. (i) DCAMM’s third party commissioning agent will create a commissioning plan and a measurement and verification (M&V) plan to be provided to CONTRACTOR by DCAMM prior to the acceptance of the final Design Deliverable. CONTRACTOR shall provide to DCAMM any comments on the commissioning plan and the M&V plan within thirty (30) days of receipt of each respective plan or as part of final Design Deliverable, whichever is earlier, provided that CONTRACTOR shall have at least ten (10) days to provide such comments. The commissioning plan will: describe how performance testing is to be conducted for each element and total system of the installed New Equipment/Systems; incorporate the CONTRACTOR requirements for support of performance testing and commissioning set forth in Schedule B-5: Scope of Services; designate the commissioning team and their roles and responsibilities, include the pre-functional and functional performance test forms forms, and commissioning schedule as it relates to the overall Design/Construction Schedule; and provide a description of how system deficiencies will be recorded and corrected before Project closeout. The M&V plan will: describe how the Energy Savings will be verified for the Project in a transparent manner; describe the pre- pre-installation measurement or data logging of energy consumption for each piece of equipment being installed, the recommended permanent metering equipment to be installed, and the approach for post- post-installation measurement of energy consumption of New Equipment/Systems; and include the calculation methodology for Energy Savings based on measured and stipulated variables. (ii) Design Deliverables shall not be considered completed and CONTRACTOR may not commence Installation Services for any New Equipment/Systems without CONTRACTOR’s response to the draft commissioning plan and M&V plan, unless otherwise specifically authorized by DCAMM in writing. (iii) DCAMM will provide CONTRACTOR with a final commissioning plan and M&V plan following review of CONTRACTOR’s comments on the draft plans by DCAMM’s third party agent. CONTRACTOR shall comply with the requirements of the final commissioning plan and M&V plan provided by DCAMM, including, without limitation, performing any and all testing requirements indicated to be the responsibility of CONTRACTOR or Subcontractors and coordinating schedules with DCAMM, DCAMM’s third party agent, and Subcontractors as necessary for any required testing.

Commissioning and M&V Plan. (i) DCAMM’s third party commissioning agent will create a commissioning plan and a measurement and verification (M&V) plan to be provided to CONTRACTOR by DCAMM prior to the acceptance of the final Design Deliverabledesign. CONTRACTOR shall provide to DCAMM any comments on the commissioning plan and the M&V plan within thirty (30) days of receipt of each respective the plan or as part of final Design Deliverable, whichever is earlier, provided that CONTRACTOR shall have at least ten (10) days to provide such comments. The commissioning plan willshall: describe how performance testing is to be conducted for each element and total system of the installed New Equipment/Systems; be created in accordance with the procedures outlined in Schedule B-5: Commissioning/M&V; designate the commissioning team and their roles and responsibilities, include the pre-functional and functional performance test forms forms, and commissioning schedule schedule, as it relates to the overall Design/Construction Schedule; and provide a description of how system deficiencies will be recorded and corrected before Project project closeout. . (ii) The M&V CONTRACTOR shall create a separate Measurement and Verification (M&V) plan will: describe describing how CONTRACTOR will verify the Energy Savings will be verified for the Project Project. This M&V plan shall: be created in a transparent manneraccordance with the procedures outlined in Schedule B-5: Commissioning/M&V; describe the pre- pre-installation measurement or data logging of energy consumption for each piece of equipment being installed, the recommended permanent metering equipment to be installed, and the approach for post- post-installation measurement of energy consumption of New Equipment/Systems; and include the calculation methodology for Energy Savings based on measured and stipulated variables. (ii) . The draft M&V plan shall be submitted by CONTRACTOR with 50% design submittals. CONTRACTOR must have CUSTOMER acceptance of the M&V plan prior to submission of any 90% design submission. Design Deliverables shall not be considered completed and CONTRACTOR may not commence Installation Services for any New Equipment/Systems without CONTRACTOR’s response to the draft commissioning an M&V plan and M&V planaccepted by CUSTOMER, unless otherwise specifically authorized by DCAMM in writing. (iii) DCAMM will provide CONTRACTOR with a final commissioning plan and . This M&V plan following review accepted by CUSTOMER will be used by the CONTRACTOR and the Project Manager to ensure verification of CONTRACTOR’s comments on the draft plans by DCAMM’s third party agent. CONTRACTOR shall comply with the requirements of the final commissioning plan and M&V plan provided by DCAMM, including, without limitation, performing any and all testing requirements indicated to be the responsibility of CONTRACTOR or Subcontractors and coordinating schedules with DCAMM, DCAMM’s third party agent, and Subcontractors as necessary for any required testingEnergy Savings in a transparent manner.

Commissioning and M&V Plan. (i) DCAMM’s third party commissioning agent will create a commissioning plan and a measurement and verification (M&V) plan to be provided to CONTRACTOR by DCAMM prior to the acceptance of the final Design Deliverable. CONTRACTOR shall provide to DCAMM any comments on the commissioning plan and the M&V plan within thirty (30) days of receipt of each respective plan or as part of final Design Deliverable, whichever is earlier, provided that CONTRACTOR shall have at least ten (10) days to provide such comments. The commissioning plan will: describe how performance testing is to be conducted for each element and total system of the installed New Equipment/Systems; designate the commissioning team and their roles and responsibilities, include the pre-functional and functional performance test forms and commissioning schedule as it relates to the overall Design/Construction Schedule; and provide a description of how system deficiencies will be recorded and corrected before Project closeout. The M&V plan will: describe how the Energy Savings will be verified for the Project in a transparent manner; describe the pre- installation measurement or data logging of energy consumption for each piece of equipment being installed, the recommended permanent metering equipment to be installed, and the approach for post- installation measurement of energy consumption of New Equipment/Systems; and include the calculation methodology for Energy Savings based on measured and stipulated variables. (ii) Design Deliverables shall not be considered completed and CONTRACTOR may not commence Installation Services for any New Equipment/Systems without CONTRACTOR’s response to the draft commissioning plan and M&V plan, unless otherwise specifically authorized by DCAMM in writing. (iii) DCAMM will provide CONTRACTOR with a final commissioning plan and M&V plan following review of CONTRACTORXXXXXXXXXX’s comments on the draft plans by DCAMM’s third party agent. CONTRACTOR shall comply with the requirements of the final commissioning plan and M&V plan provided by DCAMM, including, without limitation, performing any and all testing requirements indicated to be the responsibility of CONTRACTOR or Subcontractors and coordinating schedules with DCAMM, DCAMM’s third party agent, and Subcontractors as necessary for any required testing.

Commissioning and M&V Plan. (i) DCAMM’s third party commissioning agent will create a commissioning plan and a measurement and verification (M&V) plan to be provided to CONTRACTOR by DCAMM prior to the acceptance of the final Design Deliverable. CONTRACTOR shall provide to DCAMM any comments on the commissioning plan and the M&V plan within thirty (30) days of receipt of each respective plan or as part of final Design Deliverable, whichever is earlier, provided that CONTRACTOR shall have at least ten (10) days to provide such comments. The commissioning plan will: describe how performance testing is to be conducted for each element and total system of the installed New Equipment/Systems; incorporate the CONTRACTOR requirements for support of performance testing and commissioning set forth in Schedule B-5: Scope of Services; designate the commissioning team and their roles and responsibilities, include the pre-functional and functional performance test forms forms, and commissioning schedule as it relates to the overall Design/Construction Schedule; and provide a description of how system deficiencies will be recorded and corrected before Project closeout. The M&V plan will: describe how the Energy Savings will be verified for the Project in a transparent manner; describe the pre- pre-installation measurement or data logging of energy consumption for each piece of equipment being installed, the recommended permanent metering equipment to be installed, and the approach for post- post-installation measurement of energy consumption of New Equipment/Systems; and include the calculation methodology for Energy Savings based on measured and stipulated variables. (ii) Design Deliverables shall not be considered completed and CONTRACTOR may not commence Installation Services for any New Equipment/Systems without CONTRACTOR’s response to the draft commissioning plan and M&V plan, unless otherwise specifically authorized by DCAMM in writing. (iii) DCAMM will provide CONTRACTOR with a final commissioning plan and M&V plan following review of CONTRACTORXXXXXXXXXX’s comments on the draft plans by DCAMM’s third party agent. CONTRACTOR shall comply with the requirements of the final commissioning plan and M&V plan provided by DCAMM, including, without limitation, performing any and all testing requirements indicated to be the responsibility of CONTRACTOR or Subcontractors and coordinating schedules with DCAMM, DCAMM’s third party agent, and Subcontractors as necessary for any required testing.