License Fees and Royalties Consistent with the applicable U.S. DOT Common Rules, the Recipient agrees that license fees and royalties for patents, patent applications, and inventions produced with federal assistance provided through the Underlying Agreement are program income, and must be used in compliance with federal applicable requirements.
License Types (a) A Team License shall mean a subscription license that provides a limited number of licenses to a set amount of developers for a named Customer. Customer must procure enough active licenses for each individual who has Programmatic Access. A Team License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. A Team License cannot be used as a floating license.
(b) A Project License shall mean a subscription license which covers one named Customer application. The license fees are based on the total number of developers working on a named project, regardless of whether such developers are directly using the Licensed Product. For the purposes of pricing and license administration, a “Project Group” is deemed to be a distinct Customer software team within a Customer’s business unit that works towards a distinct business purpose for the benefit of a single application. Customer is required to identify the name of each such Project Group to Syncfusion; such name must be unambiguous in nature. It is acknowledged and agreed by Customer that each identified Project Group shall exist for a valid business purpose and not just as a means for consolidating software licenses to minimize license fees that are otherwise due. If, in the sole opinion of Syncfusion, multiple Customer teams would each individually meet the above definition of a Project Group, such multiple teams shall not be combined for the purpose of consolidating licenses under a single Project Group. Customer is responsible for providing information about each such Project Group to Syncfusion. By entering into this Agreement, Customer represents that after the effective date, it will not withhold information that Syncfusion requires to properly license each such Project Group, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement.
(c) A Division License shall mean a subscription license which will cover one named Division and allow for development work on more than one project within such Division. A Division shall mean a business unit within Customer’s organization that works towards a distinct business purpose. Customer is required to identify the name of such Division to Syncfusion; such name must be unambiguous in nature. License fee determinations will be at the sole discretion of Syncfusion and be based on such factors including, but not limited to, Customer’s Division size, developer count, and the scope of the Division’s business purpose. By entering into this Agreement, Customer acknowledges that it is responsible for providing information about the named Customer Division to Syncfusion sufficient for Syncfusion to price the Division License, and Customer represents that it will not withhold information that Syncfusion requires to properly license each such named Customer division, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement.
(d) A Global License shall mean a subscription license for all development for a named Customer, where the license fees are based on the overall size of a named Customer. A Global License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer.
(e) A Retail License shall mean a single named user, non-transferable license to use the Licensed Product. Retail Licenses will only made available to Customers in Syncfusion’s sole discretion and only when the number of such End-Users is finite and readily ascertainable. Accordingly, Syncfusion will make a determination as to whether or not the provision of Retail Licenses is appropriate under the circumstances applicable to any given Customer, and Syncfusion reserves the right, in its sole discretion, to refuse to make available Retail Licenses to a Customer and instead require a given Customer to procure a Project License, Division License, or Global License as circumstances dictate. A Retail License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer.
Sublicense Fees In partial consideration of the License and subject to Sections 3.7 and 3.8, Company will pay to Penn:
(i) [CONFIDENTIAL TREATMENT REQUESTED] /*/ percent ([CONFIDENTIAL TREATMENT REQUESTED] /*/%) of sublicensing royalties actually received by Company and its Affiliates in consideration of sublicenses of the License for Licensed Products Sold by sublicensees for use in the Field of Use while covered in the country of Sale of expected use by a Valid Claim of the Penn Patent Rights that is licensed to Company under the License, provided that, such amounts payable to Penn with respect to such sublicensing royalties for such Sales of such Licensed Products shall not be less than [CONFIDENTIAL TREATMENT REQUESTED] /*/ percent ([CONFIDENTIAL TREATMENT REQUESTED] /*/%) of Net Sales of such Licensed Products made by sublicensees (as such Net Sales definition is applied to sublicensees, and applying Section 3.8 to such sublicensees’ Net Sales); and
(ii) [CONFIDENTIAL TREATMENT REQUESTED] /*/ percent ([CONFIDENTIAL TREATMENT REQUESTED] /*/%) of all other sublicensing fees and payments and other consideration actually received by Company in consideration of sublicenses under the License granted by Company or its Affiliates, excluding for this clause (ii) (1) sublicensing royalties addressed by clause (i) above, (2) equity investments to the extent not in excess of fair market value made by sublicensees in Company or its Affiliates, (3) payments by sublicensees to Company or Affiliates for payment or reimbursement of patent prosecution, defense, enforcement and maintenance and/or other related expenses, and (4) payments by sublicensees to Company or its Affiliates for future research, development or commercialization activities (including pre-clinical or clinical studies) undertaken by or for Company or its Affiliates (including payments for FTEs), and further provided that if Company pays to Penn a milestone payment under Section 3.2 for achieving a milestone for which Company receives from a sublicensee a payment for achieving the same milestone subject to this Section 3.5(ii), then the amount of the Company’s payment to Penn under Section 3.2 shall be deducted from such sublicensee’s payment for purposes of this Section 3.5(ii) and shall not be subject to such [CONFIDENTIAL TREATMENT REQUESTED] /*/ percent ([CONFIDENTIAL TREATMENT REQUESTED] /*/%) share.
AUDIT OF LICENSED PRODUCT USAGE Contractor shall have the right to periodically audit, no more than annually, at Contractor’s expense, use of licensed Product at any site where a copy of the Product resides provided that: (i) Contractor gives Licensee(s) at least thirty (30) days advance written notice, (ii) such audit is conducted during such party’s normal business hours, (iii) the audit is conducted by an independent auditor chosen on mutual agreement of the parties. Contractor shall recommend a minimum of three (3) auditing/accounting firms from which the Licensee will select one (1). In no case shall the Business Software Alliance (BSA), Software Publishers Association (SPA), Software and Industry Information Association (SIIA) or Federation Against Software Theft (FAST) be used directly or indirectly to conduct audits, or be recommended by Contractor; (iv) Contractor and Licensee are each entitled to designate a representative who shall be entitled to participate, and who shall mutually agree on audit format, and simultaneously review all information obtained by the audit. Such representatives also shall be entitled to copies of all reports, data or information obtained from the audit; and (v) if the audit shows that such party is not in compliance, Licensee shall be required to purchase additional licenses or capacities necessary to bring it into compliance and shall pay for the unlicensed capacity at the NYS Net Price in effect at time of audit, or if none, then at the Contractor’s U.S. Commercial list price. Once such additional licenses or capacities are purchased, Licensee shall be deemed to have been in compliance retroactively, and Licensee shall have no further liability of any kind for the unauthorized use of the software.
Payment of Royalties To the best of Seller’s knowledge, all royalties and in-lieu royalties with respect to the Assets which accrued or are attributable to the period prior to the Effective Time have been properly and fully paid, or are included within the suspense amounts being conveyed to Buyer pursuant to Section 11.4.
PATENTS AND ROYALTIES Unless otherwise provided, the Contractor shall be solely responsible for obtaining the right to use any patented or copyrighted materials in the performance of the contract resulting from this Invitation for Bids. The Contractor, without exception, shall indemnify and save harmless the County and its employees from liability of any nature or kind, including cost and expenses for or on account of any copyrighted, patented, or unpatented invention, process, or article manufactured or supplied by the Contractor. In the event of any claim against the County of copyright or patent infringement, the County shall promptly provide written notification to the Contractor. If such a claim is made, the Contractor shall use its best efforts to promptly purchase for the County any infringing products or services or procure a license, at no cost to the County, which will allow continued use of the service or product. If none of the alternatives are reasonably available, the County agrees to return the article on request to the Contractor and receive reimbursement, if any, as may be determined by a court of competent jurisdiction.
License Type Your license to a Product will be under a Named User or CPU license type, as specified on an order. Each Named User license to a Product entitles a Named User to access and use that Product in one production environment and up to two non-production environments. Each CPU license to a Product entitles you to assign the Product to a single CPU in one production environment and up to two non-production environments, for use in support of an unspecified number of Named Users.
SOFTWARE LICENSE GRANT Where Product is acquired on a licensed basis the following shall constitute the license grant:
Running Royalties Company shall pay to JHU a running royalty as set forth in Exhibit A, for each LICENSED PRODUCT(S) sold, and for each LICENSED SERVICE(S) provided, by Company or AFFILIATED COMPANIES, based on NET SALES and NET SERVICE REVENUES for the term of this Agreement. Such payments shall be made quarterly. All non-US taxes related to LICENSED PRODUCT(S) or LICENSED SERVICE(S) sold under this Agreement shall be paid by Company and shall not be deducted from royalty or other payments due to JHU. In order to insure JHU the full royalty payments contemplated hereunder, Company agrees that in the event any LICENSED PRODUCT(S) shall be sold to an AFFILIATED COMPANY or SUBLICENSEE(S) or to a corporation, firm or association with which Company shall have any agreement, understanding or arrangement with respect to consideration (such as, among other things, an option to purchase stock or actual stock ownership, or an arrangement involving division of profits or special rebates or allowances) the royalties to be paid hereunder for such LICENSED PRODUCT(S) shall be based upon the greater of: 1) the net selling price (per NET SALES) at which the purchaser of LICENSED PRODUCT(S) resells such product to the end user, 2) the NET SERVICE REVENUES received from using the LICENSED PRODUCT(S) in providing a service, or 3) the net selling price (per NET SALES) of LICENSED PRODUCT(S) paid by the purchaser. No multiple royalties shall be due or payable because any LICENSED PRODUCT(S) or LICENSED SERVICE(S) is covered by more than one claim of the PATENT RIGHTS or by claims of both the PATENT RIGHTS under this Agreement and “PATENT RIGHTS” under any other license agreement between Company and JHU. The royalty shall not be cumulative based on the number of patents or claims covering a product or service, but rather shall be capped at the rate set forth in Exhibit A.
License Fees If so provided in the Prospectus, the Depositor may enter into a Licensing Agreement (the "Agreement") with a licensor (the "Licensor") described in the Prospectus in which the Trust(s), as consideration for the licenses granted by the Licensor for the right to use its trademarks and trade names, intellectual property rights or for the use of databases and research owned by the Licensor, will pay a fee set forth in the Agreement to the applicable Licensor or the Depositor to reimburse the Depositor for payment of the expenses. If the Agreement provides for an annual license fee computed in whole or part by reference to the average daily net asset value of the Trust assets, for purpose of calculating the accrual of estimated expenses such annual fee shall accrue at a daily rate and the Trustee is authorized to compute an estimated license fee payment (i) until the Depositor has informed the Trustee that there will be no further deposits of additional Securities, by reference to an estimate of the average daily net asset value of the Trust assets which the Depositor shall provide the Trustee, (ii) thereafter and during the calendar quarter in which the last business day of the period described in clause (i) occurs, by reference to the net asset value of the Trust assets as of such last business day, and (iii) during each subsequent calendar quarter, by reference to the net asset value of the Trust assets as of the last business day of the preceding calendar quarter. The Trustee shall adjust the net asset value (Trust Fund Evaluation) as of the dates specified in the preceding sentence to account for any variation between accrual of estimated license fee and the license fee payable pursuant to the Agreement, but such adjustment shall not affect calculations made prior thereto and no adjustment shall be made in respect thereof.
(17) Sections 2.05(a) and 2.05(b) are hereby amended and replaced in their entirety with the following:
