Creating or Filling a Job. The indication of a job and accompanying wage rate in the Wage Schedule shall not bind the Employer to create or fill any job.
Creating or Filling a Job Sample Clauses
Related to Creating or Filling a Job
Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters). 2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance. 2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks. 2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire. 2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety
User Content 13.1 The Site permits the submission and posting of questions and answers in connection with Evaluation Processes and may also permit the submission and posting of other text and/or other content submitted by you and other users (all of the foregoing, collectively, “User Submissions”), and the hosting, sharing, and/or publishing of such User Submissions. You understand that whether or not such User Submissions are published, the Company does not guarantee any confidentiality with respect to any User Submissions. You acknowledge that you shall not be due any remuneration in connection with your User Submissions from the Company or from any other User. 13.2 You shall be solely responsible for your own User Submissions and the consequences of posting or publishing them. In connection with your User Submissions, you affirm, represent, and/or warrant that: (i) your submission of User Submissions and the publication and use thereof by the Company does not violate the copyrights, trade secrets rights or other intellectual property rights of any third party, nor shall it constitute or result in a breach of any duty or obligation of confidentiality owed by you to any third party, and (ii) you have the written consent, release, and/or permission of each and every identifiable individual person in the User Submission to use the name or likeness of each and every such identifiable individual person to enable inclusion and use of the User Submissions in the manner contemplated by the Company and this Agreement. 13.3 By submitting User Submissions to the Site, you hereby grant to the Company a perpetual, irrevocable, worldwide, royalty-free, transferable, sublicensable right and license to use, reproduce, modify, distribute and exploit such User Submission in any manner and in any form of media, whether currently or hereafter existing. You represent and warrant that you have all necessary right, title and interest in and to each such User Submission to validly grant such license to the Company. 13.4 In connection with User Submissions and any other transmission of messages or material facilitated by the Site, you further agree that you will not: (i) submit or transmit material that is not authorized by the copyright owner, protected by trade secret or otherwise subject to third party proprietary rights, including privacy and publicity rights, unless you are the owner of such rights or have permission from their rightful owner to post the material and grant the rights granted to the Company in Section 13.3 above; (ii) publish or transmit falsehoods or misrepresentations that could damage the Company or any third party; (iii) submit or transmit material that is unlawful, defamatory, libelous, threatening, pornographic, harassing, hateful, racially or ethnically offensive or encourages conduct that would be considered a criminal offense, give rise to civil liability, violate any law or is otherwise inappropriate; (iv) post or transmit advertisements or solicitations of business; or (v) impersonate another person. If notified by a user or a content owner of a User Submission that allegedly does not conform to this Agreement, the Company may investigate the allegation and determine in good faith and in its sole discretion whether to remove the User Submission, which it reserves the right to do at any time. Additionally, the Company may, at any time, remove any User Submission that in the sole judgment of the Company violates this Agreement. 13.5 User Submissions may be provided by (without limitation) Users who are members of a Start-Up management team, contacts referred by Start-Ups (including without limitation customers, scientific advisors, background references, suppliers and distributors), external experts referred by the Company. The insights, recommendations, views and other content reflected in a User Submission should be taken as opinion rather than statements of facts. Investors should conduct their own diligence before making an investment. Nothing contained in a User Submission constitutes tax, legal, insurance or investment advice, or the recommendation of or an offer to sell, or the solicitation of an offer to buy or invest in, any investment product, vehicle, service or instrument. Such an offer or solicitation may only be made by delivery to a prospective investor of formal offering materials, including subscription or account documents or form, which should be reviewed carefully by any such investor before making the decision to invest in any particular company issuer listed, reviewed or discussed on the Propel(x) platform. To the maximum extent permitted under applicable law, you hereby release Propel(x) (and our officers, directors, agents, investors, subsidiaries, and employees) and each other User from any and all claims, demands, liabilities, losses or damages (whether direct, indirect, consequential, incidental or otherwise) of every kind and nature, known and unknown, suspected or unsuspected, arising out of or in any way related to User Submissions (including your reliance thereon). You acknowledge that, in connection with the foregoing release, you hereby irrevocably waive all rights granted to you under Section 1542 of the California Civil Code or any analogous applicable state or federal law or regulation. Said Section 1542 of the Civil Code of the State of California reads as follows:
VACANCIES AND PROMOTIONS 10.1 All openings for instructional and administrative positions shall be posted on the District website. Notice of these vacancies shall be posted at least five (5) work days prior to the filling of such vacancy. Vacancies which occur during June, July, and August shall be posted for only four (4) work days. Vacancies that occur within one week of the beginning of school, within one week after the Deputy Superintendent’s FTE mini-count, or during the school year due to a resignation or approved transfer, may be filled prior to the job closing if a qualified applicant is available. Agreement between the Superintendent and the ABCE President will be necessary for this to occur. Vacancies that occur in “Critical Shortage Areas” shall be advertised in accordance with the contract but may be filled prior to the job closing, with an available, certified and qualified applicant. Agreement between the Superintendent and the ABCE President will be necessary for this to occur. 10.2 All openings for supplements listed in Appendix D or other extra-compensated positions will be posted within that school on the ABCE bulletin board and via email to all current staff at that school site where the opening occurs at least five (5) work days prior to filling such vacancy. If no one is chosen from that school, then the vacancy will be advertised county wide for an additional five (5) work days. 10.3 If positions are not properly advertised within the provisions of Article X, the Association may file a grievance at Step 2 of the grievance provision. 10.4 Applicants selected for interviews shall be from the pool of certified and qualified applicants only. Certified: Hold a valid in-field Florida temporary or professional certificate that matches the certification(s) required for the position being advertised. Qualified: Anyone using the High Objective Uniform State Standard of Evaluation (HOUSSE) plan to qualify must meet the criteria outlined in School Board policy and match the certification required for the position being advertised. Alternately, state-certified teachers may also be required to "qualify" for positions by holding additional endorsements such as ESOL, Reading, and Gifted. Exception: Applicants applying for positions that require district-granted CTE certification (non-transferable) need not hold that certification prior to being selected for an interview but must meet the minimum criteria outlined in the district's Process for Granting District CTE Certificates.
User Generated Content 10.1 As a user to this website, You may be allowed to post any User Generated Content (“User Content”) and You agree, by submitting your contribution, you xxxxx XX Group a perpetual, royalty-free, non-exclusive, sublicensable right and license to use, reproduce, edit, modify, adapt, publish, translate, create derivate works from, distribute, perform, play, make available to the public, and exercise all copyright and publicity rights with respect to your contribution worldwide and/or to incorporate your contribution in other works in any media, now known or later developed, for the full terms of any rights that may exist in your contribution. 10.2 You also hereby grant other user of TM Website a non-exclusive license to access your User Content through the access and/or use of TM Website, and to use such User Content only as permitted through the functionality of TM Website. 10.3 You understand and agree that TM may retain and store, but not display, distribute, or perform, server copies of User Content that has been removed or deleted. The above licenses granted to TM, by You in User Content is irrevocable. 10.4 Further to the foregoing paragraph, by submitting your User Content to us, You warrant that:- (a) your User Content is your own original work or have the necessary license, rights, consents, and permissions to use and authorize us to use all patent, trademark, trade secret, copyright or other proprietary rights in and to any and all User Content to enable TM to use of the User Content in the manner required by us and that you have the right to make it available to us for all the purposes specified above; (b) your User Content is not defamatory, threatening, injurious, insulting character, offensive, abusive, offensive on moral, menacing, religious or political grounds, impair your confidentiality obligations; (c) your User Content does not infringe the law; (d) You shall be solely responsible for your own User Content and the consequences of posting or publishing them; (e) You will not submit material that is copyrighted, protected by trade secret or otherwise subject to third party proprietary rights, including privacy and publicity rights, unless you are the owner of such rights or have permission from their rightful owner to post material and to grant us all of the license rights granted herein; and/or (f) waive any moral rights in your User Content for the purposes of its submission to and publication in TM Website and the purposes specified above. 10.5 You understand that whether or not such User Content is posted, TM does not guarantee any confidentiality with respect to any User Content. TM does not endorse any User Content or any opinion, recommendation, or advice expressed therein, and expressly disclaims any and all liability in connection with User Content. We do not permit activities which will infringe any Intellectual Property Rights including copyright and we will remove all infringing contents and User Content upon notification that such Content or User Content infringes on another’s Intellectual Property Rights. We further reserve the right to remove any Content or User Content without prior notice. 10.6 You understand and agree that we may review and delete any User Content that you posted at any time without notice, without liability and for any reason whatsoever, especially if you breach the terms and conditions herein. 10.7 We reserve the right to investigate and take appropriate legal action, in our sole discretion, against You for the User Content especially if it violates TM policy and report you to the Appropriate Authority.
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.
Preservative-treated Wood Containing Arsenic Grantee may not purchase preservative-treated wood products containing arsenic in the performance of this Agreement unless an exemption from the requirements of Chapter 13 of the San Francisco Environment Code is obtained from the Department of the Environment under Section 1304 of the Code. The term “preservative-treated wood containing arsenic” shall mean wood treated with a preservative that contains arsenic, elemental arsenic, or an arsenic copper combination, including, but not limited to, chromated copper arsenate preservative, ammoniacal copper zinc arsenate preservative, or ammoniacal copper arsenate preservative. Grantee may purchase preservative-treated wood products on the list of environmentally preferable alternatives prepared and adopted by the Department of the Environment. This provision does not preclude Grantee from purchasing preservative-treated wood containing arsenic for saltwater immersion. The term “saltwater immersion” shall mean a pressure-treated wood that is used for construction purposes or facilities that are partially or totally immersed in saltwater.
Random Drug Testing All employees covered by this Agreement shall be subject to random drug testing in accordance with Appendix D.
Timeliness of Submitting Orders You are obliged to date and indicate the time of receipt of all orders you receive from your customers and to transmit promptly all orders to us in time to provide for processing at the price next determined after receipt by you, in accordance with the Prospectuses. You are not to withhold placing with us orders received from any customers for the purchase of shares. You shall not purchase shares through us except for the purpose of covering purchase orders already received by you, or for your bona fide investment.
End User This agreement shall bind the ordering activity as end user but shall not operate to bind a Government employee or person acting on behalf of the Government in his or her personal capacity.
Procedures for Providing NP Through Full NXX Code Migration Where a Party has activated an entire NXX for a single Customer, or activated at least eighty percent (80%) of an NXX for a single Customer, with the remaining numbers in that NXX either reserved for future use by that Customer or otherwise unused, if such Customer chooses to receive Telephone Exchange Service from the other Party, the first Party shall cooperate with the second Party to have the entire NXX reassigned in the LERG (and associated industry databases, routing tables, etc.) to an End Office operated by the second Party. Such transfer will be accomplished with appropriate coordination between the Parties and subject to appropriate industry lead times for movements of NXXs from one switch to another. Neither Party shall charge the other in connection with this coordinated transfer.
