Four-Digit Date Compliance If this Agreement includes the purchase of systems, software, or instrumentation with imbedded chips, this section is applicable. Contractor represents and warrants that it will provide only Four-Digit Date Compliant deliverables and services to the JBE. “Four-Digit Date Compliant” deliverables and services can accurately process, calculate, compare, and sequence date data, including date data arising out of or relating to leap years and changes in centuries. This warranty and representation is subject to the warranty terms and conditions of this Agreement and does not limit the generality of warranty obligations set forth elsewhere in this Agreement.
Conformity Assessment Procedures 1. Each Party shall give positive consideration to accepting the results of conformity assessment procedures of other Parties, even where those procedures differ from its own, provided it is satisfied that those procedures offer an assurance of conformity with applicable technical regulations or standards equivalent to its own procedures.
2. Each Party shall seek to enhance the acceptance of the results of conformity assessment procedures conducted in the territories of other Parties with a view to increasing efficiency, avoiding duplication and ensuring cost effectiveness of the conformity assessments. In this regard, each Party may choose, depending on the situation of the Party and the specific sectors involved, a broad range of approaches. These may include but are not limited to:
(a) recognition by a Party of the results of conformity assessments performed in the territory of another Party;
(b) recognition of co-operative arrangements between accreditation bodies in the territories of the Parties;
(c) mutual recognition of conformity assessment procedures conducted by bodies located in the territory of each Party;
(d) accreditation of conformity assessment bodies in the territory of another Party;
(e) use of existing regional and international multilateral recognition agreements and arrangements;
(f) designating conformity assessment bodies located in the territory of another Party to perform conformity assessment; and
(g) suppliers’ declaration of conformity.
3. Each Party shall exchange information with other Parties on its experience in the development and application of the approaches in Paragraph 2(a) to (g) and other appropriate approaches with a view to facilitating the acceptance of the results of conformity assessment procedures.
4. A Party shall, upon request of another Party, explain its reasons for not accepting the results of any conformity assessment procedure performed in the territory of that other Party.
Joint Assessment If the Premises are not separately assessed, Lessee's liability shall be an equitable proportion of the Real Property Taxes for all of the land and improvements included within the tax parcel assessed, such proportion to be conclusively determined by Lessor from the respective valuations assigned in the assessor's work sheets or such other information as may be reasonably available.
Performance Assessment 6.1 The Performance Plan (Annexure A) to this Agreement sets out key performance indicators and competencies that needs to be evaluated in terms of –
6.1.1 The standards and procedures for evaluating the Employee’s performance; and
6.1.2 During the intervals for the evaluation of the Employee’s performance.
6.2 Despite the establishment of agreed intervals for evaluation, the Employer may in addition review the Employee’s performance at any stage while the contract of employment remains in force;
6.3 Personal growth and development needs identified during any performance review discussion must be documented in a Personal Development Plan as well as the actions agreed to and implementation must take place within set time frames;
6.4 The Employee’s performance will also be measured in terms of contributions to the goals and strategies set out in the Employer’s Integrated Development Plan (IDP) as described in 6.6 – 6.13 below;
6.5 The Employee will submit quarterly performance reports (SDBIP) and a comprehensive annual performance report at least one week prior to the performance assessment meetings to the Evaluation Panel Chairperson for distribution to the panel members for preparation purposes;
6.6 Assessment of the achievement of results as outlined in the performance plan:
6.6.1 Each KPI or group of KPIs shall be assessed according to the extent to which the specified standards or performance targets have been met (qualitative and quantitative) and with due regard to ad-hoc tasks that had to be performed under the KPI;
6.6.2 A rating on the five-point scale described in 6.9 below shall be provided for each KPI or group of KPIs which will then be multiplied by the weighting to calculate the final score;
6.6.3 The Employee will submit his self-evaluation to the Employer prior to the formal assessment;
6.6.4 In the instance where the employee could not perform due to reasons outside the control of the employer and employee, the KPI will not be considered during the evaluation. The employee should provide sufficient evidence in such instances; and
6.6.5 An overall score will be calculated based on the total of the individual scores calculated above.
Annual Audit Report On or before July 31 of each year, beginning with July 31, 2002, Servicer shall, at its own expense, cause a firm of independent public accountants (who may also render other services to Servicer), which is a member of the American Institute of Certified Public Accountants, to furnish to the Seller and Master Servicer (i) year-end audited (if available) financial statements of the Servicer and (ii) a statement to the effect that such firm has examined certain documents and records for the preceding fiscal year (or during the period from the date of commencement of such Servicer's duties hereunder until the end of such preceding fiscal year in the case of the first such certificate) and that, on the basis of such examination conducted substantially in compliance with the Uniform Single Attestation Program for Mortgage Bankers, such firm is of the opinion that Servicer's overall servicing operations have been conducted in compliance with the Uniform Single Attestation Program for Mortgage Bankers except for such exceptions that, in the opinion of such firm, the Uniform Single Attestation Program for Mortgage Bankers requires it to report, in which case such exceptions shall be set forth in such statement.
27. A new Section 5.07 is hereby added to the Master Servicing Agreement to read as follows:
Report on Assessment of Compliance and Attestation (a) On or before March 1 of each calendar year, commencing in 2007, the Servicer shall:
(i) deliver to the Owner and any Depositor a report (in form and substance reasonably satisfactory to the Owner and such Depositor) regarding the Servicer’s assessment of compliance with the Servicing Criteria during the immediately preceding calendar year, as required under Rules 13a-18 and 15d-18 of the Exchange Act and Item 1122 of Regulation AB. Such report shall be addressed to the Owner and such Depositor and signed by an authorized officer of the Servicer, and shall address each of the Servicing Criteria specified on a certification substantially in the form of Exhibit 7 hereto delivered to the Owner concurrently with the execution of this Agreement;
(ii) deliver to the Owner and any Depositor a report of a registered public accounting firm reasonably acceptable to the Owner and such Depositor that attests to, and reports on, the assessment of compliance made by the Servicer and delivered pursuant to the preceding paragraph. Such attestation shall be in accordance with Rules 1-02(a)(3) and 2-02(g) of Regulation S-X under the Securities Act and the Exchange Act;
(iii) cause each Subservicer, and each Subcontractor determined by the Company pursuant to Section 12.06(b) to be “participating in the servicing function” within the meaning of Item 1122 of Regulation AB, to deliver to the Owner and any Depositor an assessment of compliance and accountants’ attestation as and when provided in paragraphs (a) and (b) of this Section; and
(iv) if requested by the Owner or any Depositor not later than February 1 of the calendar year in which such certification is to be delivered, deliver to the Owner, any Depositor and any other Person that will be responsible for signing the certification (a “Sarbanes Certification”) required by Rules 13a-14(d) and 15d-14(d) under the Exchange Act (pursuant to Section 302 of the Xxxxxxxx-Xxxxx Act of 2002) on behalf of an asset-backed issuer with respect to a Securitization Transaction a certification in the form attached hereto as Exhibit 6. The Servicer acknowledges that the parties identified in clause (a)(iv) above may rely on the certification provided by the Servicer pursuant to such clause in signing a Sarbanes Certification and filing such with the Commission. Neither the Owner nor any Depositor will request delivery of a certification under clause (a)(iv) above, unless a Depositor is required under the Exchange Act to file an annual report on Form 10-K with respect to an issuing entity whose asset pool includes Mortgage Loans.
(b) Each assessment of compliance provided by a Subservicer pursuant to Section 12.05(a)(i) shall address each of the Servicing Criteria specified on a certification substantially in the form of Exhibit 7 hereto delivered to the Owner concurrently with the execution of this Agreement or, in the case of a Subservicer subsequently appointed as such, on or prior to the date of such appointment. An assessment of compliance provided by a Subcontractor pursuant to Section 12.05(a)(iii) need not address any elements of the Servicing Criteria other than those specified by the Servicer pursuant to Section 12.06.
Monthly Compliance Certificate Within thirty (30) days after the last day of each month and together with the Monthly Financial Statements, a duly completed Compliance Certificate signed by a Responsible Officer, certifying that as of the end of such month, Borrower was in full compliance with all of the terms and conditions of this Agreement, and setting forth calculations showing compliance with the financial covenants set forth in this Agreement and such other information as Bank shall reasonably request;
CMI/RAI MDS Report Recognizing the mutual objective of quality resident care, the Employer agrees to meet through the Union Management Committee with the Union as soon as practicable after the receipt of the annual CMI/RAI MDS report. The Employer agrees to provide the Union with staffing levels, and staffing mix information; the impact of related payroll costs on staffing levels and a written notice of the CMI/RAI MDS report for the facility. The purpose of this meeting is to discuss the impact of the CMI/RAI MDS report on the staffing levels in the Home, quality resident care, and provide the Union with an opportunity to make representation in that regard. The parties shall meet as necessary to discuss other changes or workload issues. The parties may invite additional participants to attend the meeting to support constructive review and discussion.
Final Audit Report Contractor shall promptly submit to the State a copy of any final audit report of an audit performed on Contractor’s records that relates to or affects this Contract or the Work, whether the audit is conducted by Contractor or a third party.
Annual Compliance Certificate Within one hundred and twenty (120) days after December 31, 2021 and each fiscal year of the Company ending thereafter, the Company will deliver an Officer’s Certificate to the Trustee stating (i) that the signatory thereto has supervised a review of the activities of the Company and its Subsidiaries during such fiscal year with a view towards determining whether any Default or Event of Default has occurred; and (ii) whether, to such signatory’s knowledge, a Default or Event of Default has occurred or is continuing (and, if so, describing all such Defaults or Events of Default and what action the Company is taking or proposes to take with respect thereto).
