Conflicting Provisions This Section shall supersede any provisions in Section 2.13 or 10.01 to the contrary.
Cumulative Effect; Conflict of Terms The provisions of the Loan Documents are cumulative. The parties acknowledge that the Loan Documents may use several limitations or measurements to regulate similar matters, and they agree that these are cumulative and that each must be performed as provided. Except as otherwise provided in another Loan Document (by specific reference to the applicable provision of this Agreement), if any provision contained herein is in direct conflict with any provision in another Loan Document, the provision herein shall govern and control.
Remaining Provisions Except as expressly modified by this Amendment, the Employment Agreement shall remain in full force and effect. This Amendment embodies the entire agreement and understanding of the parties hereto with respect to the subject matter hereof, and supersedes all prior and contemporaneous agreements and understandings, oral or written, relative thereto.
Overriding Provisions (a) Any Transfer or attempted Transfer of any Units in violation of this Agreement (including any prohibited indirect Transfers) shall be, to the fullest extent permitted by applicable law, null and void ab initio, and the provisions of Sections 10.05 and 10.06 shall not apply to any such Transfers. For the avoidance of doubt, any Person to whom a Transfer is made or attempted in violation of this Agreement shall not become a Member and shall not have any other rights in or with respect to any rights of a Member of the Company with respect to the applicable Units. The approval of any Transfer in any one or more instances shall not limit or waive the requirement for such approval in any other or future instance. The Manager shall promptly amend the Schedule of Members to reflect any Permitted Transfer pursuant to this Article X. (b) Notwithstanding anything contained herein to the contrary (including, for the avoidance of doubt, the provisions of Section 10.01 and Article XI and Article XII), in no event shall any Member Transfer any Units to the extent such Transfer would: (i) result in the violation of the Securities Act, or any other applicable federal, state or foreign Laws; (ii) cause an assignment under the Investment Company Act; (iii) in the reasonable determination of the Manager, be a violation of or a default (or an event that, with notice or the lapse of time or both, would constitute a default) under, or result in an acceleration of any obligation under any Credit Agreement to which the Company or the Manager is a party; provided that the payee or creditor to whom the Company or the Manager owes such obligation is not an Affiliate of the Company or the Manager; (iv) be a Transfer to a Person who is not legally competent or who has not achieved his or her majority of age under applicable Law (excluding trusts for the benefit of minors); (v) reasonably be expected to create a material risk that the Company could be treated as a “publicly traded partnership” or could be taxed as a corporation pursuant to Section 7704 of the Code or any successor provision thereto under the Code (as determined in the sole discretion of the Manager); or (vi) reasonably be expected to create a material risk that the Company would have more than one hundred (100) partners, within the meaning of Treasury Regulations Section 1.7704-1(h)(1) (determined pursuant to the rules of Treasury Regulations Section 1.7704-1(h)(3)) (as determined in the sole discretion of the Manager); provided, for the avoidance of doubt, that in determining whether a Transfer creates a material risk that the Company would have more than one hundred (100) partners, the Manager may assume in its sole discretion the admission of any number of future additional Members. (c) Notwithstanding anything contained herein to the contrary, in no event shall any Member that is not a “United States person” within the meaning of Section 7701(a)(30) of the Code Transfer any Units, unless such Member and the transferee have delivered to the Company, in respect of the relevant Transfer, written evidence that all required withholding under Section 1446(f) of the Code will have been done and duly remitted to the applicable taxing authority or duly executed certifications (prepared in accordance with the applicable Treasury Regulations or other authorities) of an exemption from such withholding. (d) Without limiting any of the foregoing, and notwithstanding any other provision of this Agreement to the contrary, no Member shall Transfer any Units during the 2021 taxable year of the Company unless such Transfer either (x) qualifies as a “block transfer” under Treasury Regulations Section 1.7704-1(e)(2), or (y) is disregarded pursuant to Treasury Regulations Sections 1.7704-1(e)(1)(ii). (e) For the avoidance of doubt, in the event that a Member (or such Member’s estate) attempts to Transfer any Units in connection with the death, disability, incapacity, dissolution, bankruptcy, insolvency or termination of such Member, such Transfer shall, to the extent it is in violation of this Agreement (unless otherwise waived by the Manager), be void ab initio and the provisions of Sections 10.05 and 10.06 shall not apply to any such Transfers, such that such Member (or such Member’s estate) remains the owner of the applicable Units. (f) In the event that, notwithstanding this Section 10.07 or any other provision in this Agreement, a Transfer is required pursuant to applicable Law, immediately prior to such Transfer, the Units subject to such Transfer shall be redeemed in accordance with the provisions of Section 11.01 and Section 11.05, as applicable, such that in no event shall the transferee in respect of such Transfer become a Member of the Company at any time.
Other Pertinent Provisions Landlord and Tenant agree that, effective as of the date of this Amendment (unless different effective date(s) is/are specifically referenced in this Section), the Lease shall be amended in the following additional respects:
Voting Provisions As a condition precedent to entering into this Agreement, at the request of the Company, Purchaser shall become a party to any voting agreement to which the Company is a party at the time of Purchaser’s execution and delivery of this Agreement, as such voting agreement may be thereafter amended from time to time (the “Voting Agreement”), by executing an adoption agreement or counterpart signature page agreeing to be bound by and subject to the terms of the Voting Agreement and to vote the Shares in the capacity of a “Common Holder” and a “Stockholder,” as such terms may be defined in the Voting Agreement.
Definitional Provisions For purposes of this Agreement, (i) those words, names, or terms which are specifically defined herein shall have the meaning specifically ascribed to them; (ii) wherever from the context it appears appropriate, each term stated either in the singular or plural shall include the singular and plural; (iii) wherever from the context it appears appropriate, the masculine, feminine, or neuter gender, shall each include the others; (iv) the words “hereof”, “herein”, “hereunder”, and words of similar import, when used in this Agreement, shall refer to this Agreement as a whole, and not to any particular provision of this Agreement; (v) all references to “Dollars” or “$” shall be construed as being United States Dollars; (vi) the term “including” is not limiting and means “including without limitation”; and, (vii) all references to all statutes, statutory provisions, regulations, or similar administrative provisions shall be construed as a reference to such statute, statutory provision, regulation, or similar administrative provision as in force at the date of this Agreement and as may be subsequently amended.
Lock-Up Provisions (a) The Subject Party hereby agrees not to, during the period commencing from the Closing and ending on the earliest of (x) six (6) months after the date of the Closing and (y) the date after the Closing on which the Purchaser consummates a liquidation, merger, capital stock exchange, reorganization, or other similar transaction with an unaffiliated third party that results in all of the Purchaser’s stockholders having the right to exchange their shares of the Purchaser Common Stock for cash, securities, or other property (the “Lock-Up Period”): (i) lend, offer, pledge, hypothecate, encumber, donate, assign, sell, contract to sell, sell any option or contract to purchase, purchase any option or contract to sell, grant any option, right or warrant to purchase, or otherwise transfer or dispose of, directly or indirectly, any Restricted Securities, (ii) enter into any swap or other arrangement that transfers to another, in whole or in part, any of the economic consequences of ownership of the Restricted Securities, or (iii) publicly disclose the intention to do any of the foregoing, whether any such transaction described in clauses (i), (ii), or (iii) above is to be settled by delivery of Restricted Securities or other securities, in cash or otherwise (any of the foregoing described in clauses (i), (ii), or (iii), a “Prohibited Transfer”). (b) The foregoing shall not apply to the transfer of any or all of the Restricted Securities (I) to any Permitted Transferee or (II) pursuant to a court order or settlement agreement related to the distribution of assets in connection with the dissolution of marriage or civil union; provided, however, that in either of cases (I) or (II), it shall be a condition to such transfer that such transfer complies with the Securities Act of 1933, as amended, and other applicable law, and that the transferee executes and delivers to the Purchaser an agreement stating that the transferee is receiving and holding the Restricted Securities subject to the provisions of this Agreement applicable to the Subject Party, and there shall be no further transfer of such Restricted Securities except in accordance with this Agreement. As used in this Agreement, the term “Permitted Transferee” shall mean: (1) the members of the Subject Party’s immediate family (for purposes of this Agreement, “immediate family” shall mean with respect to any natural person, any of the following: such person’s spouse or domestic partner, the siblings of such person and his or her spouse or domestic partner, and the direct descendants and ascendants (including adopted and step children and parents) of such person and his or her spouses or domestic partners and siblings), (2) any trust for the direct or indirect benefit of the Subject Party or the immediate family of the Subject Party, (3) if the Subject Party is a trust, to the trustor or beneficiary of such trust or to the estate of a beneficiary of such trust, (4) in the case of an entity, officers, directors, general partners, limited partners, members, or stockholders of such entity that receive such transfer as a distribution, or related investment funds or vehicles controlled or managed by such persons or their respective affiliates, (5) to any affiliate of the Subject Party, and (6) any transferee whereby there is no change in beneficial ownership. The Subject Party further agrees to execute such agreements as may be reasonably requested by the Purchaser that are consistent with the foregoing or that are necessary to give further effect thereto.
Transitional Provisions 24.1. As from the official date of entry into force of the 01 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 01 series of amendments. 24.2. As from 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 01 series of amendments to this Regulation. 24.3. Type approvals of components other than fuel rail, as defined in paragraph 4.72., granted according to the original version of this Regulation or of components granted according to the 01 series of amendments, shall remain valid and shall be accepted for the purpose of their installation on vehicles as long as the requirements for the specific component have not changed by any series of amendments. 24.4. As from 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 01 series of amendments to this Regulation. 24.5. Until 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the type of components to the original version of this Regulation without taking into account the provisions of the 01 series of amendments. 24.6. Until 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the vehicle type to the original version of this Regulation without taking into account the provisions of the 01 series of amendments. 24.7. Notwithstanding the provisions of paragraphs 24.5. and 24.6., Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 01 series of amendments to this Regulation. 24.8. As from the official date of entry into force of the 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 02 series of amendments. 24.9. As from 1 September 2017 Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 02 series of amendments to this Regulation. 24.10. As from 1 September 2018 Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 02 series of amendments to this Regulation. 24.11. As from 1 September 2019 Contracting Parties applying this Regulation may refuse to recognize approvals of a type of vehicle which have not been granted in accordance with Part II of this Regulation as amended by the 02 series of amendments to this Regulation. 24.12. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 02 series of amendments to this Regulation. 24.13. Notwithstanding paragraphs 24.11. and 24.12., Contracting Parties applying this Regulation shall continue to accept type approvals granted to the preceding series of amendments, which are not affected by the 02 series of amendments.
Definitions and General Provisions The following words and terms as hereinafter used in this Agreement shall have the following meanings unless otherwise herein provided and unless the context or use clearly indicates an other or different meaning or intent.
