Customers Use of the Facility
Customers Use of the Facility Sample Clauses
Related to Customers Use of the Facility
The Facility Subject to the terms of this Agreement, the Lenders make available to the Borrowers a multicurrency revolving loan facility in an aggregate amount equal to the Total Commitments.
The Facilities Subject to the terms of this Agreement, the Lenders make available to the Borrower: (a) a sterling term loan facility in an aggregate amount equal to the Total Facility A Commitments; (b) a sterling term loan facility in an aggregate amount equal to the Total Facility B Commitments; and (c) a sterling term loan facility in an aggregate amount equal to the Total Facility C Commitments.
Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification. 2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length. 2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A. 2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned. 2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.
GENERAL WORKING CONDITIONS Section 18-1. Employment begins and ends at each project site. Section 18-2. The selection of craft foremen and/or general foremen and the number of foremen required shall be entirely the responsibility of the Employer, it being understood that in the selection of such foremen and/or general foremen the Employer will give primary consideration to the qualified individuals available in the local area. After giving such consideration, the Employer may select such individuals from other areas. All foremen shall take orders from the designated Employer representatives. Craft foremen shall be designated working foremen at the request of the Employer. Section 18-3. There shall be no limit on production by employees nor restrictions on the full use of tools or equipment. Employees using tools shall perform any of the work of the trade and shall work under the direction of the craft foremen. There shall be no restrictions on efficient use of manpower other than as may be required by safety regulations. Section 18-4. Employees shall be at their place of work at the starting time and shall remain at their place of work performing their assigned functions under the supervision of the Employer until quitting time. The parties reaffirm their policy of a fair day’s work for a fair day’s wage. Section 18-5. All equipment assigned to a project shall be under the control of the Employer. The Employer shall have the right to determine how many pieces of equipment an individual employee shall operate. In an emergency, foremen shall operate any equipment assigned by the Employer, and there shall be no restriction on foremen in the use of the tools of his or her craft in such emergency. The foremen shall be from the craft normally operating the equipment. In accordance with currently recognized craft jurisdiction, the Employer shall determine the assignment of employees to start, stop, and maintain small portable construction equipment. Such work may be assigned to craft employees within a reasonable distance of their primary duties or an employee may be assigned full time to start, stop and maintain the Employer’s small, portable equipment on the job site. There shall be no over xxxxxxx of this type of equipment. The number of employees assigned to rigging and scaffolding operations shall be at the sole discretion of the Employer. The ratio of journeyperson to welders shall be determined solely by the Employer. Section 18-6. The Employer may utilize the most efficient methods or techniques of construction, tools or other labor saving devices to accomplish the work. Practices not a part of the terms and conditions of this Agreement, stand by crews and feather bedding practices will not be recognized. Section 18-7. It is recognized that specialized or unusual equipment may be installed and/ or serviced by individuals who have special training, skill, or qualifications and are not covered by this Agreement. Testing, inspection, or service performed on plant equipment under warranty may be performed by the vendor’s personnel. Section 18-8. Neither the Union nor its local unions shall coerce or in any way interfere with the Owner’s personnel, operation or facilities at the plant site. The Owner’s right to contract directly with other companies for work at the plant site shall not be limited, and the Union shall cooperate and not interfere with the Employer’s operations. Section 18-9. It is agreed that overtime is undesirable and not in the best interest of the industry or the employees; therefore, except in unusual circumstances, overtime will not be worked. Where unusual circumstances do exist, however, the Employer will have the right to assign specific employees and/or crews to perform such overtime work as is necessary to accomplish the job. Section 18-10. There will be no rest periods, organized coffee breaks or other non-working time established during working hours. Section 18-11. Individual seniority shall not be recognized or applied to employees working on projects under this Agreement. Section 18-12. The Employer shall establish such reasonable project rules as the Employer deems appropriate. These rules will be reviewed at the pre-job conference and posted at the project site by the Employer, and may be amended thereafter as necessary.
Conditions of Use CLIENT acknowledges that its use of the Site is subject to and conditioned upon the following terms and agrees that TAILGATE GUYS may exercise any of the remedies set forth herein for CLIENTS failure to comply: a. CLIENT shall comply with all rules and regulations established by TAILGATE GUYS, USC, Exposition Park, and any other applicable authority, including but not limited to parking regulations in effect on campus. A copy of current rules and regulations is attached hereto as Exhibit A, which shall be subject to adjustment at any time by TAILGATE GUYS, USC or other applicable authorities. b. CLIENT shall be permitted to access the Site at the respective times set forth in the rules or otherwise determined by TAILGATE GUYS and USC. c. CLIENT acknowledges all risks related to its attendance and use of the Site, including risk of damage to or loss of property or risk of serious personal injury or death, and accepts sole responsibility for such risks. CLIENT shall secure all personal property in and around the Site and shall take all precautions necessary to prevent theft or destruction thereof. CLIENT expressly acknowledges and agrees that TAILGATE GUYS shall not be responsible for any personal property of or injury to CLIENT at any time. TAILGATE GUYS will not remove or hold for safe-keeping any personal items left on the Site after event closing and same will be subject to removal by USC facilities. CLIENT may be subject to costs and fees associated with such removal. Except for damage caused by a TAILGATE GUYS employee performing his or her assigned responsibilities, TAILGATE GUYS is not responsible for damages (e.g. from collision with other vehicles, falling debris, or inclement weather) to any vehicles parked in or moving through parking or tailgate areas where TAILGATE GUYS has sold parking passes or provides any tailgate or parking related services. d. Eligibility for any TAILGATE GUYS drop off service is determined by Tailgate Guys in its sole discretion and is based on University restrictions, staffing availability and other factors. If CLIENT is eligible to participate in any TAILGATE GUYS drop off service, the CLIENT is responsible for properly packaging all items that will be transported and otherwise agrees to comply with procedures established by TAILGATE GUYS for this “drop off service,” including but not limited to any limitations with regard to the amount and size of items to be transported. TAILGATE GUYS will not be responsible for any damaged or broken items during unloading or loading and transportation to or from the Site. e. CLIENT shall respect the interests of other fans and clients of TAILGATE GUYS and shall not engage in or permit disorderly or offensive conduct in or around the Site. CLIENT further agrees not to exceed the maximum number of guests allowed within the as set forth in the Exhibit A. Should CLIENT violate these provisions, TAILGATE GUYS management will give CLIENT a verbal warning. If CLIENT fails to promptly come into compliance, TAILGATE GUYS may immediately revoke CLIENT’s rights to the Site and in its sole and absolute discretion terminate this Agreement. Upon such revocation or termination, all amounts paid to TAILGATE GUYS with be forfeited by CLIENT and retained by TAILGATE GUYS. f. CLIENT shall not move, damage, alter, or disrupt operation of any equipment provided by TAILGATE GUYS. In the event of inclement weather, TAILGATE GUYS reserves the exclusive right to cover and protect all equipment associated with the Media Package with such materials and coverings as it deems appropriate, which may include TV covers or hard cases for TV’s, plastic bags for receivers and generators or the like (collectively, the "Protective Equipment"). CLIENT shall not remove any Protective Equipment or items contained inside Protective Equipment, and expressly acknowledges and agrees that only TAILGATE GUYS staff shall have authority to do so. CLIENT acknowledges and agrees that its right to use the media equipment may be suspended, without refund, at TAILGATE GUYS option, for violation of these provisions. a CLIENT further assumes all responsibility for any damages to any TAILGATE GUYS equipment resulting from violation of these provisions and shall reimburse TAILGATE GUYS for the cost to repair or replace damaged equipment. g. CLIENT shall keep the Site in a neat and orderly manner at all times and may incur fees set forth on Exhibit A, attached hereto and made a part hereof. h. CLIENT acknowledges and agrees that the signage identifying each Site is uniform and provided by TAILGATE GUYS, who reserves the right to omit any vulgar, offensive or discriminatory content requested by CLIENT, in the sole and absolute discretion of TAILGATE GUYS. i. TAILGATE GUYS reserves the right to immediately terminate CLIENT’s use of the Site for violation of the conditions of use. In addition, CLIENT shall be responsible for payment of all damages incurred by TAILGATE GUYS as a result of CLIENT’s failure to comply with the foregoing conditions of use or as a result of damages by CLIENT of any equipment of TAILGATE GUYS. To insure compliance and payment of damages or fines, CLIENT agrees to keep a credit card on file with TAILGATE GUYS, and hereby authorizes TAILGATE to charge said credit card amounts owing as a result of its breach; provided that TAILGATE GUYS delivers to CLIENT an itemization of said charges and receipt for payment thereof.
Additional Acceptable Uses of Student Data Contractor is prohibited from using Student Data for any secondary use not described in this agreement except: a. for adaptive learning or customized student learning purposes; b. to market an educational application or product to a parent or legal guardian of a student if Contractor did not use Data, shared by or collected per this Contract, to market the educational application or product; c. to use a recommendation engine to recommend to a student i. content that relates to learning or employment, within the third-party contractor's internal application, if the recommendation is not motivated by payment or other consideration from another party; or
Data Use Each party may use Connected Account Data in accordance with this Agreement and the consent (if any) each obtains from each Connected Account. This consent includes, as to Stripe, consent it receives via the Connected Account Agreement.
Use of Basement and Service Areas The basement(s) and service areas, if any, as located within the
Exceptional Access to Thick Registration Data In case of a registrar failure, deaccreditation, court order, etc. that prompts the temporary or definitive transfer of its domain names to another registrar, at the request of ICANN, Registry Operator will provide ICANN with up-‐to-‐date data for the domain names of the losing registrar. The data will be provided in the format specified in Specification 2 for Data Escrow. The file will only contain data related to the domain names of the losing registrar. Registry Operator will provide the data as soon as commercially practicable, but in no event later than five (5) calendar days following ICANN’s request. Unless otherwise agreed by Registry Operator and ICANN, the file will be made available for download by ICANN in the same manner as the data specified in Section 3.1 of this Specification.
Use of the Card 4.1. The Cardholder shall use the Card and operate the Account in a satisfactory manner. The decision as to whether the Card is being so used or the Account is being so operated rests with the Bank and shall be conclusive and binding on the Account Holder/s and on the Cardholder. 4.2. The Bank will bear no responsibility for the refusal of any merchant or establishment to accept the Card for any reason whatsoever. 4.3. Cash withdrawals that are recorded by the ATM, and payments effected by the Cardholder with his Card, shall be debited to his Bank Account. 4.4. Before using his Card, the Cardholder shall ensure that there are sufficient funds on his Account to cover the payment of the Card transactions. Furthermore, the Cardholder will not operate the Account in such a way to exceed the available balance of the Account. 4.5. The fraudulent, incorrect or illegal use of the Card by any person whomsoever shall not relieve the Cardholder of his liabilities to the Bank in respect thereof. 4.6. The Bank shall not be responsible to the Cardholder for any goods or services supplied to the Cardholder by merchants, or to any person to whom the said goods and services have been supplied. Disputes arising from the supply of such goods and services shall be settled directly with the merchants without the Bank being constituted party thereto. The Cardholder shall consequently not be relieved of his obligations to the Bank under the relevant Card transactions. 4.7. The Cardholder shall ensure the correctness of the amounts borne on, and contained in, the envelopes referred to in clause 1.3 of Part III above. The contents of the envelopes shall be checked and certified by two officers of the Bank. The amounts so certified shall be credited to the Account whose number is borne on the envelopes and shall be final and conclusive and not liable to be called in question by the Cardholder or the Account Holder. 4.8. Transactions for POS and ATM withdrawals are subject to the respective daily limits as determined by the Bank from time to time.
