Data and Forecasting. Seller shall provide Site, meteorological and production data in accordance with the terms of Article 6 (Forecasting) of this Agreement and the following requirements: Physical Site Data: Seller shall provide Company with an accurate description of the physical Site, including but not limited to the following, [as appropriate to Facility resource type(s) and use of storage] which may not be changed during the Term without Company's prior written consent: Location Facility Map showing the layout of the Facility (coverage area or footprint) and the coordinates (latitude and longitude) of generating equipment: Solar PV: elevation (above ground), orientation angle and direction (north-east-south-west plane) of arrays/concentrators. Wind Generators: coordinates (latitude and longitude) and height above ground of each wind turbine hub. Location (latitude and longitude) and elevation (above ground) of each MMT / MMS and elevation (above ground) of each field measurement device for, e.g., air density, ambient air pressure and ambient air temperature, located at each MMT or each field measurement device located on such MMS. For solar resource inverters: Inverter type, power rating, array configuration to inverters and DC rating of the Facility at the following standard test conditions: irradiance of 1000 W/ , air mass 1.5, and cell temperature 25 C. Solar generation technology employed at the Facility with temperature dependence, mounting and module type. Wind generation technology employed at the Facility with representative power curve(s). XXXX technology and related auxiliary equipment, location and type.
Data and Forecasting. Seller shall provide Site, meteorological and production data in accordance with the terms of Article 6 (Forecasting) of this Agreement and the following requirements: Physical Site Data: Seller shall provide Company with an accurate description of the physical Site, including but not limited to the following, which may not be changed during the Term without Company's prior written consent: Location Facility Map showing the layout of the Facility (coverage area or footprint) and the coordinates (latitude and longitude), elevation (above ground), orientation angle and direction (north-east-south-west plane) of arrays/concentrators. Location (latitude and longitude) and elevation (above ground) of each MMS and each field measurement device located on such MMS. Inverter type, power rating, array configuration to inverters and DC rating of the Facility at the following standard test conditions: irradiance of 1000 W/ , air mass 1.5, and cell temperature 25 C. Solar generation technology employed at the Facility with temperature dependence, mounting and module type.
Data and Forecasting. Seller shall provide Site, meteorological and production data in accordance with the terms of this Agreement and the following requirements: Physical Site Data: Seller shall provide Company with an accurate description of the physical Site, including but not limited to the following, [as appropriate to Facility resource type(s) and use of storage] which may not be changed during the Term without Company’s prior written consent:
A. Location Facility Map showing the layout of the Facility (coverage area or footprint) and the coordinates (latitude and longitude) of generating equipment: Solar PV: elevation (above ground), orientation angle and direction (north-east-south-west plane) of arrays/concentrators. Wind Generators: coordinates (latitude and longitude) and height above ground of each wind turbine hub.
B. Location (latitude and longitude) and elevation (above ground) of each MMT / MMS and elevation (above ground) of each field measurement device for, e.g., air density, ambient air pressure and ambient air temperature, located at each MMT or each field measurement device located on such MMS.
C. For solar resource inverters: Inverter type, power rating, array configuration to inverters and DC rating of the Facility at the following standard test conditions: irradiance of 1000 W/ , air mass 1.5, and cell temperature 25 C.
D. Solar generation technology employed at the Facility with temperature dependence, mounting and module type.
X. Xxxx generation technology employed at the Facility with representative power curve(s).
X. XXXX technology and related auxiliary equipment, location and type. Seller shall install and maintain a minimum of two MMS for facilities that have either (i) a DC rating of the Facility of 5 MW or greater or (ii) a coverage area greater than one square kilometer. Placement of each MMS should account for the microclimate of the area and Facility coverage area and shall be oriented with respect to the primary wind direction. Seller shall provide to Company, via SCADA communication and protocol acceptable to Company to support operations and forecasting needs at a continuous scan, all meteorological and production data required under this Agreement updated every 2 seconds. Seller shall arrange for a dedicated distribution voltage line to provide separate service from Company, or for such other independent, backup power source as approved by Company in writing, to temporarily store and record the meteorological data from the field measurin...
Data and Forecasting. Seller shall provide Site, meteorological and production data in accordance with the terms of Article 6 (Forecasting) of this Agreement and the following requirements:
(i) Physical Site Data: Seller shall provide Company with an accurate description of the physical Site, including but not limited to the following, which may not be changed during the Term without Company's prior written consent:
A. Location Facility Map showing the layout of the Facility (coverage area or footprint), coordinates (latitude and longitude) and height above ground of each Wind Turbine hub.
B. Location (latitude and longitude) of each MMT and elevation (above ground) of each field measurement device for, e.g., air density, ambient air pressure and ambient air temperature, located at each MMT.
X. XXXX technology and related auxiliary equipment, location and type.
Data and Forecasting. Seller shall provide data and/or a power forecast in accordance with the terms of Article 6 (Forecasting) of this Agreement.
Data and Forecasting. Seller shall provide Site, meteorological and production data in accordance with the terms of Article 6 (Forecasting) of this Agreement and the following requirements: Physical Site Data: Seller shall provide Company with an accurate description of the physical Site, including but not limited to the following, [as appropriate to Facility resource type(s) and use of storage] which may not be changed during the Term without Company's prior written consent: Location Facility Map showing the layout of the Facility (coverage area or footprint) and the coordinates (latitude and longitude), elevation (above ground), orientation angle and direction (north-east-south-west plane) of arrays/concentrators. Location (latitude and longitude) and elevation (above ground) of each MMS and each field measurement device located on such MMS. Inverter type, power rating, array configuration to inverters and DC rating of the Facility at the following standard test conditions: irradiance of 1000 W/ , air mass 1.5, and cell temperature 25 C. Solar generation technology employed at the Facility with temperature dependence, mounting and module type. XXXX technology and related auxiliary equipment, location and type.
