Units and Accuracy Sample Clauses

Units and Accuracy. [For PV] The Table below shows minimum required solar irradiance measurements for various types of solar generation technology. [DRAFTING NOTE: VALUES NEED TO BE INSERTED INTO TABLE.] This value may not be derived. Flat Plate (fixed horizontal, fixed angle, tracking, roof mounted) X X Units and accuracy of measured parameters to be provided to Company in real time shall be as shown in the Table below. These represent the minimum required accuracies. Global Horizontal Irradiance at MMS Pyranometer or equivalent W/m2 0 to 1500 W/m2 Secondary standard per ISO 9060 or <= 3% from 100 W/m2 to 1500 W/m2 if using a PV Reference Cell Plane of Array Irradiance on same axis as array Pyranometer or equivalent W/m2 0 to 1500 W/m2 Secondary standard per ISO 9060 or <= 3% from 100 W/m2 to 1500 W/m2 if using a PV Reference Cell Back of Panel temperature at array height Temperature probe ºC -20 to +50 ºC +/-1 ºC Power production of Facility Measured at POI MW Up to Capacity +-0.1 MW Inverters Available* Seller’s system digital Up to the number installed inverters Ratio of inverters online/number of inverters % 0 to 100% Power Possible* Seller's Model MW 0 to Allowed Capacity +/-0.1 MW Wind speed at MMT (hub height) Cup or sonic anemometer Mph 0 to 134 mph +/-1 mph Wind direction at MMT (hub height) Vane, sonic device or equivalent Degrees (from True North) 360° +/-5° Ambient air temperature at MMT (hub height) Temperature probe ºC -20 to +50 ºC +/-1 ºC Ambient air pressure at MMT (hub height) Piezoresistive transducer, barometer or equivalent Mbar 150 to 1150 mbar +/-60 mbar (0 to +50ºC) Power production of Facility Measured at POI MW +/- 0.1 mw Power Possible Seller’s Model MW 0 to 120% of Allowed Capacity +/0.1 MW Status of Generating Equipment: For each inverter, or wind turbine, Seller shall provide to Company, via SCADA communication and protocol acceptable to Company at a continuous scan updated not less frequently than every 2 seconds, a signal as to whether such inverter is available or unavailable, and on or offline. Data Collection. High Resolution Data: Seller shall install and make available to the Company time stamped and sequential data recordings for all inverter-based resources (and all generating resources) to perform event analysis and verify Facility performance during steady state and transient disturbance events. This will include a time-synchronized phasor measurement unit at the Facility, and access to multiple sources to provide sufficient clarity a...
Sample 1Sample 2Sample 3See All (31)
AutoNDA by SimpleDocs
Units and Accuracy. The Table below shows minimum required solar irradiance measurements for various types of solar generation technology. [DRAFTING NOTE: VALUES NEED TO BE INSERTED INTO TABLE.] This value may not be derived. Flat Plate (fixed horizontal, fixed angle, tracking, roof mounted) X X Units and accuracy of measured parameters to be provided to Company in real time shall be as shown in the Table below. These represent the minimum required accuracies. Global Horizontal Irradiance at MMS Pyranometer or equivalent W/m2 0 to 1500 W/m2 Secondary standard per ISO 9060 or <= 3% from 100 W/m2 to 1500 W/m2 if using a PV Reference Cell Plane of Array Irradiance on same axis as array Pyranometer or equivalent W/m2 0 to 1500 W/m2 Secondary standard per ISO 9060 or <= 3% from 100 W/m2 to 1500 W/m2 if using a PV Reference Cell Back of Panel temperature at array height Temperature probe ºC -20 to +50 ºC +/-1 ºC Power production of Facility Measured at POI MW Up to Capacity +/-0.1 MW Inverters available Seller's system digital Up to the number of installed inverters Ratio of inverters online/number of inverters % 0 to 100%
Sample 1Sample 2
Units and Accuracy. A. Units and accuracy of measured parameters to be provided to Company in real time shall be as shown in the table below. These represent the minimum required accuracies. Wind speed at nacelle of each WTGS Cup or sonic anemometer Mph 0 to 134 mph +/-1 mph Wind direction at nacelle of each WTGS Vane, sonic device or equivalent Degrees (from True North) 360º +/-5º Wind speed at MMT Cup or sonic anemometer Mph 0 to 134 mph +/-1 mph Wind direction at MMT Vane, sonic device or equivalent Degrees (from True North) 360° +/-5° Ambient air temperature at MMT (hub height) Temperature probe ºC -20 to +50 ºC +/-1 ºC Ambient air pressure at MMT (hub height) Piezoresistive transducer, barometer or equivalent Mbar 150 to 1150 mbar +/-60 mbar (0 to +50ºC) Power production for each WTGS Measured at WTGS MW -20% to 120% of WTGS name plate +/-0.1 MW Set point for each WTGS Reported by Seller MW 0 to 120% WTGS name plate Not applicable Power production of Facility Measured at Facility's analog transducers on Seller's side of POI MW -20% to 120% of Allowed Capacity The lesser of the tolerances of the communication/ telemetry equipment or 2% of measurement Facility power production ratio Ratio of Facility's power production (MW)/Allowed Capacity (MW) % 0 to 100% +/-0.1% Power Possible Seller’s Model MW 0 to 120% of Allowed Capacity +/0.1 MW
Sample 1

Related to Units and Accuracy

  • Full and Accurate Disclosure No statement of fact made by Borrower in this Agreement or in any of the other Loan Documents contains any untrue statement of a material fact or omits to state any material fact necessary to make statements contained herein or therein not misleading. There is no material fact presently known to Borrower which has not been disclosed to Lender which adversely affects, nor as far as Borrower can foresee, might adversely affect, the Property or the business, operations or condition (financial or otherwise) of Borrower.

  • Certification of Accuracy The following parties have reviewed the information above and certify, to the best of their knowledge, that the information they have provided is true and accurate.

  • Information provided to be accurate All financial and other information which is provided in writing by or on behalf of the Borrower under or in connection with any Finance Document will be true and not misleading and will not omit any material fact or consideration.

  • Complete and Accurate Information Contractor represents and warrants that all statements and information provided to HHS are current, complete, and accurate. This includes all statements and information in this Contract and any related Solicitation Response.

  • Completeness and Modification This Agreement constitutes the entire understanding between the parties hereto superseding all prior and contemporaneous agreements or understandings among the parties hereto concerning the Employment Agreement. This Agreement may be amended, modified, superseded or canceled, and any of the terms, covenants, representations, warranties or conditions hereof may be waived, only by a written instrument executed by the parties or, in the case of a waiver, by the party to be charged.

  • Data Accuracy The Custodian has no responsibility for, or duty to review, verify or otherwise perform any investigation as to the completeness, accuracy or sufficiency of, any data or information provided by or on behalf of the Client, any persons authorized by the Client, any Third Party Agent, any Market Participant or any Authorized Data Sources, except to the extent the Custodian has agreed in writing to perform reconciliations, variance or tolerance checks or other specific forms of data review under this Agreement.

  • Representations and Warranties of Optionee Optionee hereby represents and warrants that: A. The options granted hereby and the Shares which will be purchased by and delivered to Optionee upon exercise of such options are being acquired by Optionee for his own account and not with a view to resale or other disposition thereof. B. Optionee will not sell, transfer, or make any other disposition of any option or the shares to be purchased and delivered to Optionee hereunder upon the exercise of such option unless and until (a) such option or shares, as applicable, are included in a registration statement or a post-effective amendment under the Securities Act which has been filed by the Optionor and declared effective by the Securities and Exchange Commission (the "SEC"), or (b) in the opinion of counsel for the Optionor, no such registration statement or post-effective amendment is required, or (c) the SEC has first issued a "no action" letter regarding any such proposed disposition of any option or the shares.

  • Representations and Warranties of Consultant (a) Consultant has the requisite power and authority to enter into and perform his obligations under this Agreement without the consent, approval or authorization of, or obligation to notify, any person, entity or governmental agency which consent has not been obtained. (b) The execution, delivery and performance of this Agreement by Consultant does not and shall not constitute Consultant’s breach of any statute or regulation or ordinance of any governmental authority, and shall not conflict with or result in a breach of or default under any of the terms, conditions, or provisions of any order, writ, injunction, decree, contract, agreement, or instrument to which the Consultant is a party, or by which Company is or may be bound.

  • Reciprocal Representations and Warranties The Seller/Servicer and Residential Funding each represents and warrants to the other that as of the date of this Contract: (1) Each party is duly organized, validly existing, and in good standing under the laws of its jurisdiction of organization, is qualified, if necessary, to do business and in good standing in each jurisdiction in which it is required to be so qualified, and has the requisite power and authority to enter into this Contract and all other agreements which are contemplated by this Contract and to carry out its obligations hereunder and under the Guides and under such other agreements. (2) This Contract has been duly authorized, executed and delivered by each party and constitutes a valid and legally binding agreement of each party enforceable in accordance with its terms. (3) There is no action, proceeding or investigation pending or threatened, and no basis therefor is known to either party, that could affect the validity or prospective validity of this Contract. (4) Insofar as its capacity to carry out any obligation under this Contract is concerned, neither party is in violation of any charter, articles of incorporation, bylaws, mortgage, indenture, indebtedness, agreement, instrument, judgment, decree, order, statute, rule or regulation and none of the foregoing adversely affects its capacity to fulfill any of its obligations under this Contract. Its execution of, and performance pursuant to, this Contract will not result in a violation of any of the foregoing.

  • Representations and Warranties of Executive Executive represents and warrants to the Company that— (a) Executive is entering into this Agreement voluntarily and that Executive’s employment hereunder and compliance with the terms and conditions hereof will not conflict with or result in the breach by Executive of any agreement to which Executive is a party or by which Executive may be bound; (b) Executive has not violated, and in connection with Executive’s employment with the Company will not violate, any non-solicitation, non-competition, or other similar covenant or agreement of a prior employer by which Executive is or may be bound; and (c) in connection with Executive’s employment with the Company, Executive will not use any confidential or proprietary information Executive may have obtained in connection with employment with any prior employer.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!