Demonstration Site Selection Sample Clauses

Demonstration Site Selection. The goal of this subtask is to select an appropriate set of buildings to test the integrated energy efficiency retrofit packages modeled and mocked up in the applied research stage of the project. Buildings will be representative of a large pool of multifamily building stock for which the solutions will be transferable. ● Perform outreach to property owners to target ideal candidates for demonstration based upon building characterization analysis and suitability for testing integrated energy efficiency retrofit packages. Buildings will be representative of a large pool of multifamily building stock in California for which the solutions will be transferable. ● Selection of each demonstration site is subject to review and approval by the CAM. The CEC reserves the right to visit all demonstration sites prior to approval. The recipient must have written authorization from the CAM for each demonstration site in order to proceed. ● After CAM approval of a demonstration site, if problems arise in continuing with the site, written approval from the CAM is necessary to end work on this site and pursue a different site. ● Obtain and provide Property Demonstration Site Commitment Letters from building owners describing the buildings committed to demonstrate the integrated energy efficiency retrofit packages. ● Collect baseline energy performance data from all targeted properties, including annual disaggregated end use energy consumption per unit, identification of major existing energy using equipment—including age, efficiency, square footage, energy density (energy use/sf) equipment set points, equipment schedules, usage patterns, and occupancy patterns, results of which will be reported in a set of Energy Audit Reports for each property. ● Prepare a CPR Report #2 and participate in a CPR meeting, per Subtask 1.3. In addition, CPR Report #2 must address how the market scaling activities described in Task 6 could be supported beyond the grant term, including the costs, fees that will need to be charged, and the engagement and partnership strategy for consortiums, financing partners, energy service providers, manufacturers, utilities and others. ● Copies of Property Demonstration Site Commitment Letters ● Energy Audit Reports ● CPR Report #2
Sample 1
AutoNDA by SimpleDocs

Related to Demonstration Site Selection

  • Loop Testing/Trouble Reporting 2.1.6.1 Telepak Networks will be responsible for testing and isolating troubles on the Loops. Telepak Networks must test and isolate trouble to the BellSouth portion of a designed/non-designed unbundled Loop (e.g., UVL-SL2, UCL-D, UVL-SL1, UCL-ND, etc.) before reporting repair to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Telepak Networks will be required to provide the results of the Telepak Networks test which indicate a problem on the BellSouth provided Loop. 2.1.6.2 Once Telepak Networks has isolated a trouble to the BellSouth provided Loop, and had issued a trouble report to BellSouth on the Loop, BellSouth will take the actions necessary to repair the Loop if a trouble actually exists. BellSouth will repair these Loops in the same time frames that BellSouth repairs similarly situated Loops to its End Users. 2.1.6.3 If Telepak Networks reports a trouble on a non-designed or designed Loop and no trouble actually exists, BellSouth will charge Telepak Networks for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Loop’s working status. 2.1.6.4 In the event BellSouth must dispatch to the end-user’s location more than once due to incorrect or incomplete information provided by Telepak Networks (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Xxxxxxx Networks for each additional dispatch required to repair the circuit due to the incorrect/incomplete information provided. BellSouth will assess the applicable Trouble Determination rates from BellSouth’s FCC or state tariffs.

  • Compliance Control Services (1) Support reporting to regulatory bodies and support financial statement preparation by making the Fund's accounting records available to the Trust, the Securities and Exchange Commission (the “SEC”), and the independent accountants. (2) Maintain accounting records according to the 1940 Act and regulations provided thereunder. (3) Perform its duties hereunder in compliance with all applicable laws and regulations and provide any sub-certifications reasonably requested by the Trust in connection with any certification required of the Trust pursuant to the Xxxxxxxx-Xxxxx Act of 2002 (the “SOX Act”) or any rules or regulations promulgated by the SEC thereunder, provided the same shall not be deemed to change USBFS’s standard of care as set forth herein. (4) Cooperate with the Trust’s independent accountants and take all reasonable action in the performance of its obligations under this Agreement to ensure that the necessary information is made available to such accountants for the expression of their opinion on the Fund’s financial statements without any qualification as to the scope of their examination.

  • Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract. a. The contractor shall notify all potential subcontractors and suppliers and lessors of their EEO obligations under this contract. b. The contractor will use good faith efforts to ensure subcontractor compliance with their EEO obligations.

  • Quality Control Program Engineer shall have a quality control program in place that ensures that all deliverable work is of high quality. Engineer shall submit a plan detailing its program to the Inspection Branch of the TxDOT Bridge Division for review and approval prior to beginning work. State may review or audit the programs.

  • Benchmarks for Measuring Accessibility For the purposes of this Agreement, the accessibility of online content and functionality will be measured according to the W3C’s Web Content Accessibility Guidelines (WCAG) 2.0 Level AA and the Web Accessibility Initiative Accessible Rich Internet Applications Suite (WAI-ARIA) 1.0 for web content, which are incorporated by reference.

  • Compliance with Accessibility Standards All parties to this Agreement shall ensure that the plans for and the construction of all projects subject to this Agreement are in compliance with standards issued or approved by the Texas Department of Licensing and Regulation (TDLR) as meeting or consistent with minimum accessibility requirements of the Americans with Disabilities Act (P.L. 101-336) (ADA).

  • Required Procurement Procedures for Obtaining Goods and Services The Grantee shall provide maximum open competition when procuring goods and services related to the grant- assisted project in accordance with Section 287.057, Florida Statutes.

  • Substance Abuse Testing The Parties agree that it is in the best interest of all concerned to promote a safe working environment. The Union has no objection to pre-employment substance abuse testing when required by the Employer and further, the Union has no objection to voluntary substance abuse testing to qualify for employment on projects when required by a project owner. The cost and scheduling of such testing shall be paid for and arranged by the Employer. The Union agrees to reimburse the Employer for any failed pre-access Alcohol and Drug test costs.

  • Quality control system (i) The Contractor shall establish a quality control mechanism to ensure compliance with the provisions of this Agreement (the “Quality Assurance Plan” or “QAP”). (ii) The Contractor shall, within 30 (thirty) days of the Appointed Date, submit to the Authority’s Engineer its Quality Assurance Plan which shall include the following: (a) organisation, duties and responsibilities, procedures, inspections and documentation; (b) quality control mechanism including sampling and testing of Materials, test frequencies, standards, acceptance criteria, testing facilities, reporting, recording and interpretation of test results, approvals, check list for site activities, and proforma for testing and calibration in accordance with the Specifications for Road and Bridge Works issued by MORTH, relevant IRC specifications and Good Industry Practice; and (c) internal quality audit system. The Authority’s Engineer shall convey its approval to the Contractor within a period of 21 (twenty-one) days of receipt of the QAP stating the modifications, if any, required, and the Contractor shall incorporate those in the QAP to the extent required for conforming with the provisions of this Clause 11.2. (iii) The Contractor shall procure all documents, apparatus and instruments, fuel, consumables, water, electricity, labour, Materials, samples, and qualified personnel as are necessary for examining and testing the Project Assets and workmanship in accordance with the Quality Assurance Plan. (iv) The cost of testing of Construction, Materials and workmanship under this Article 11 shall be borne by the Contractor.

  • Contractor Selection In this section, please describe the selection process, including other sources considered and the rationale for selecting the contractor. Please answer all questions: a. What specific skill set does this contractor bring to the project? Please attach a copy of the contractor’s resume if an individual or link to contractor website if a company: i. Xxxxxxxx Xxxx Xxxxx is a retired NHPS teacher with thirty-seven years of experience, with nearly thirty of those teaching years in the Talented and Gifted Program. The Monk Center has worked with New Haven's students and continue to provide programming specific to the New Haven Public Schools. The Monk Center has demonstrated an ability to engage and encourage our students in meaningful and engaging activities. The summer program provides opportunities for students to participate in dance and music activities which allow them to express themselves and learn the historical content of the dance and music. b. How was the Contractor selected? Quotes, RFP/RFQ, Sealed Bid or Sole Source designation from the City of New Haven Purchasing Department? i. RFQ c. Is the contractor the lowest bidder? If no, why? Why was this contractor selected? i. Yes, the contractor provides an activities that usually are offered at high prices than the one proposed. d. Who were the members of the selection committee that scored bid applications? i. Xxxxxx Xxxxxxx, Xxxxx Xxxxxxxxx, Xxxxx Xxxxxx Xxxxxxx, Xxxxxxxxx Xxxxxxx, Xxxxxx Xxxxxxx, Xxxxxxx Xxxxx, Xxxxxxxx Xxxxxxx, Xxxx Xxxxxxx e. If the contractor is Sole Source, please attach a copy of the Sole Source designation letter from the City of New Haven Purchasing Department. i. N/A

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!