Common use of DESCRIPTION OF PROJECT & UNITS Clause in Contracts

DESCRIPTION OF PROJECT & UNITS. The following describes the Project and Units to be constructed, operated and maintained by Seller through the Term in accordance with the Agreement. Project name: ___________________________ [PG&E Drafting Note: PG&E to update for Project technologies other than energy storage Energy storage] technology of Units: _________ Physical Location and Point of Interconnection: CAISO transmission access charge area (e.g. PG&E): Point of interconnection: APPENDIX II-B. PROJECT SIZE Aggregate nameplate capacity: ___ MW APPENDIX II-C. – SELLER’S PORTFOLIO LIST as of _[insert relevant date for each submittal]_ Customer Service Account Number Customer name Physical address of Site Total Unit capacity installed as part of the Project Unit capacity installed to meet capacity associated with Operational Characteristics (no SGIP funds) Unit capacity installed in excess of capacity associated with Operational Characteristics (Specify if SGIP is used) Unit manufacturer(s) and model number(s) installed at Site with corresponding Unit capacity CAISO Resource ID Sub-LAP By submitting this Seller’s Portfolio List to Buyer, Seller attests as of the date signed below, that all of the information is accurate and that the Customers and Units comprising Seller’s Portfolio List are in compliance with the terms of the Agreement. Signature: Name: Title: Date: APPENDIX III OPERATIONAL CHARACTERISTICS [PG&E Drafting Note: PG&E to update for Project technologies other than energy storage] The following describes the Operational Characteristics to determine the amount of Capacity Attributes of the Product. Physical Location and Point of Interconnection CAISO transmission access charge area (e.g. PG&E): Shall be as set forth in Appendix II-A Sub-LAP(s): weightings to be set in accordance with Seller’s Initial Portfolio List Point of interconnection: Shall be as set forth in Appendix II-A Discharging and Charging Maximum continuous discharge power (Dmax): ___ MW Minimum continuous discharge power (Dmin): ___ MW Maximum discharge duration at constant Dmax : ___ hours Maximum continuous charge power (Cmax): ____ MW Minimum continuous charge power (Cmin): ____ MW Maximum charge duration at constant Cmax: ___ hours Amount of Energy released to fully discharge: ___ MWh Amount of Energy required to fully charge: ___ MWh Round-trip efficiency: ______________ %

DESCRIPTION OF PROJECT & UNITS. The following describes the Project and Units to be constructed, operated and maintained by Seller through the Term in accordance with the Agreement. Project name: ___________________________ [PG&E Drafting Note: PG&E to update for Project technologies other than energy Energy storage Energy storage] technology of Units: _________ Physical Location and Point of Interconnection: CAISO transmission access charge Minimum installed capacity to be built without SGIP funding in accordance with Section 4.1(f): _______ Distribution area (e.g. PG&Esubject to Section 4.1(b): Point of interconnection: __________ APPENDIX II-B. PROJECT SIZE Aggregate nameplate capacityAND WEIGHTING Sub-LAP(s) assigned to the Project’s CAISO Resource IDs and weightings for the Energy Settlement payment as of the Initial Delivery Date: ___ MW CAISO Resource ID Sub-LAP Installed Capacity (kW) Weighting (%) APPENDIX II-C. – SELLER’S PORTFOLIO LIST as of _[insert relevant date for each submittal]_ Customer Service Account Number Customer name Name Physical address Address of Site Total Unit capacity installed Capacity Installed as part Part of the Project Unit capacity installed Capacity Installed to meet capacity associated with Operational Characteristics Contract Quantities (no SGIP funds) Unit capacity installed Capacity Installed in excess Excess of capacity associated with Operational Characteristics Contract Quantities (Specify if SGIP is used) Unit manufacturer(sManufacturer(s) and model number(sModel Number(s) installed Installed at Site with corresponding Corresponding Unit capacity Capacity CAISO Resource ID Sub-LAP By submitting this Seller’s Portfolio List to Buyer, Seller attests as of the date signed below, that all of the information is accurate and that the Customers and Units comprising Seller’s Portfolio List are in compliance with the terms of the Agreement. Signature: Name: Title: Date: APPENDIX III OPERATIONAL CHARACTERISTICS [PG&E Drafting Note: PG&E to update for Project technologies other than energy storage] The following describes the Operational Characteristics to determine the amount of Capacity Attributes of the Product. Physical Location and Point of Interconnection CAISO transmission access charge area (e.g. PG&E): Shall be as set forth in Appendix II-A Sub-LAP(s): weightings to be set in accordance with Seller’s Initial Portfolio List Point of interconnection: Shall be as set forth in Appendix II-A Discharging and Charging Maximum continuous power the Project can continuously discharge power (Dmax): ___ MW Minimum continuous power the Project can continuously discharge power (Dmin): ___ MW Maximum Amount of time it takes the Project to fully discharge duration at constant Dmax : ___ hours (hours) Maximum continuous power the Project can continuously charge power (Cmax): ____ MW Minimum continuous power the Project can continuously charge power (Cmin): ____ MW Maximum Amount of time it takes the Project to fully charge duration at constant Cmax: ___ hours (hours) Amount of Energy released the Project is able to fully discharge: ___ MWh Amount of Energy required the Project requires to fully charge: ___ MWh Round-trip efficiencyEfficiency: ______________ %

DESCRIPTION OF PROJECT & UNITS. The following describes the Project and Units to be constructed, operated and maintained by Seller through the Term in accordance with the Agreement. Project name: ___________________________ [PG&E Drafting Note: PG&E to update for Project technologies other than energy Energy storage Energy storage] technology of Units: _________ Physical Location and Point of Interconnection: CAISO transmission access charge area (e.g. PG&E): Point of interconnection: APPENDIX II-B. PROJECT SIZE Aggregate nameplate capacity: ___ MW APPENDIX II-C. – SELLER’S PORTFOLIO LIST as of _[insert relevant date for each submittal]_ Customer Service Account Number Customer name Physical address of Site Total Unit capacity installed as part of the Project Unit capacity installed to meet capacity associated with Operational Characteristics (no SGIP funds) Unit capacity installed in excess of capacity associated with Operational Characteristics (Specify if SGIP is used) Unit manufacturer(s) and model number(s) installed at Site with corresponding Unit capacity CAISO Resource ID Sub-LAP By submitting this Seller’s Portfolio List to Buyer, Seller attests as of the date signed below, that all of the information is accurate and that the Customers and Units comprising Seller’s Portfolio List are in compliance with the terms of the Agreement. Signature: Name: Title: Date: APPENDIX III OPERATIONAL CHARACTERISTICS [PG&E Drafting Note: PG&E to update for Project technologies other than energy storage] The following describes the Operational Characteristics to determine the amount of Capacity Attributes of the Product. Physical Location and Point of Interconnection CAISO transmission access charge area (e.g. PG&E): Shall be as set forth in Appendix II-A Sub-LAP(s): weightings to be set in accordance with Seller’s Initial Portfolio List Point of interconnection: Shall be as set forth in Appendix II-A Discharging and Charging Maximum continuous discharge power (Dmax): ___ MW Minimum continuous discharge power (Dmin): ___ MW Maximum discharge duration at constant Dmax : ___ hours Maximum continuous charge power (Cmax): ____ MW Minimum continuous charge power (Cmin): ____ MW Maximum charge duration at constant Cmax: ___ hours Amount of Energy released to fully discharge: ___ MWh Amount of Energy required to fully charge: ___ MWh Round-trip efficiency: ______________ %

DESCRIPTION OF PROJECT & UNITS. The following describes the Project and Units to be constructed, operated and maintained by Seller through the Term in accordance with the Agreement. Project name: ___________________________ [PG&E Drafting Note: PG&E to update for Project technologies other than energy storage Energy storage] technology of Units: _________ Physical Location and Point of Interconnection: CAISO transmission access charge area (e.g. PG&E): Point of interconnection: APPENDIX II-B. PROJECT SIZE Aggregate nameplate capacity: ___ MW APPENDIX II-C. – SELLER’S PORTFOLIO LIST as of _[insert relevant date for each submittal]_ Customer Service Account Number Customer name Physical address of Site Total Unit capacity installed as part of the Project Unit capacity installed to meet capacity associated with Operational Characteristics (no SGIP funds) Unit capacity installed in excess of capacity associated with Operational Characteristics (Specify if SGIP is used) Unit manufacturer(s) and model number(s) installed at Site with corresponding Unit capacity CAISO Resource ID Sub-LAP By submitting this Seller’s Portfolio List to Buyer, Seller attests as of the date signed below, that all of the information is accurate and that the Customers and Units comprising Seller’s Portfolio List are in compliance with the terms of the Agreement. Signature: Name: Title: Date: APPENDIX III OPERATIONAL CHARACTERISTICS [PG&E Drafting Note: PG&E to update for Project technologies other than energy storage] The following describes the Operational Characteristics to determine the amount of Capacity Attributes of the Product. Physical Location and Point of Interconnection CAISO transmission access charge area (e.g. PG&E): Shall be as set forth in Appendix II-A Sub-LAP(s): weightings to be set in accordance with Seller’s Initial Portfolio List Point of interconnection: Shall be as set forth in Appendix II-A Discharging and Charging Maximum continuous discharge power (Dmax): ___ MW Minimum continuous discharge power (Dmin): ___ MW Maximum discharge duration at constant Dmax : ___ hours Maximum continuous charge power (Cmax): ____ MW Minimum continuous charge power (Cmin): ____ MW Maximum charge duration at constant Cmax: ___ hours Amount of Energy released to fully discharge: ___ MWh Amount of Energy required to fully charge: ___ MWh Round-trip efficiency: ______________ %

DESCRIPTION OF PROJECT & UNITS. The following describes the Project and Units to be constructed, operated and maintained by Seller through the Term in accordance with the Agreement. Project name: ___________________________ [PG&E Drafting Note: PG&E to update for Project technologies other than energy storage Energy storage] technology of Units: _________ Physical Location and Point of Interconnection: CAISO transmission access charge area (e.g. PG&E): Point of interconnection: APPENDIX II-B. PROJECT SIZE Aggregate nameplate capacity: ___ MW APPENDIX II-C. – SELLER’S PORTFOLIO LIST as of _[insert relevant date for each submittal]_ Customer Service Account Number Customer name Physical address of Site Total Unit capacity installed as part of the Project Unit capacity installed to meet capacity associated with Operational Characteristics (no SGIP funds) Unit capacity installed in excess of capacity associated with Operational Characteristics (Specify if SGIP is used) Unit manufacturer(s) and model number(s) installed at Site with corresponding Unit capacity CAISO Resource ID Sub-LAP By submitting this Seller’s Portfolio List to Buyer, Seller attests as of the date signed below, that all of the information is accurate and that the Customers and Units comprising Seller’s Portfolio List are in compliance with the terms of the Agreement. Signature: Name: Title: Date: APPENDIX III OPERATIONAL CHARACTERISTICS [PG&E Drafting Note: PG&E to update for Project technologies other than energy storage] The following describes the Operational Characteristics to determine the amount of Capacity Attributes of the Product. Physical Location and Point of Interconnection CAISO transmission access charge area (e.g. PG&E): Shall be as set forth in Appendix II-A Sub-LAP(s): weightings to be set in accordance with Seller’s Initial Portfolio List Point of interconnection: Shall be as set forth in Appendix II-A Discharging and Charging Maximum continuous discharge power (Dmax): ___ MW Minimum continuous discharge power (Dmin): ___ MW Maximum discharge duration at constant Dmax Dmax: ___ hours Maximum continuous charge power (Cmax): ____ MW Minimum continuous charge power (Cmin): ____ MW Maximum charge duration at constant Cmax: ___ hours Amount of Energy released to fully discharge: ___ MWh Amount of Energy required to fully charge: ___ MWh Round-trip efficiency: ______________ %