Section 336(e) Election If UTC determines, in its sole discretion, that one or more protective elections under Section 336(e) of the Code (each, a “Section 336(e) Election”) shall be made with respect to the Carrier Distribution, the Otis Distribution, and/or any of the Internal Distributions, the relevant SpinCo(s) shall (and shall cause any relevant member of such SpinCo Group(s) to) join with UTC and/or any relevant member of the UTC Group, as applicable, in the making of any such election and shall take any action reasonably requested by UTC or that is otherwise necessary to give effect to any such election (including making any other related election). If a Section 336(e) Election is made with respect to the Carrier Distribution, the Otis Distribution, and/or any of the Internal Distributions, then this Agreement shall be amended in such a manner as is determined by UTC in good faith to take into account such Section 336(e) Election(s), including by requiring that, in the event (a) any Contribution, Distribution, or Internal Distribution fails to have U.S. Tax-Free Status and (b) a Company (or such Company’s Group) that does not have exclusive responsibility pursuant to this Agreement for Tax-Related Losses arising from such failure actually realizes in cash a Tax Benefit from the step-up in Tax basis resulting from the relevant Section 336(e) Election(s), such Company shall pay over to the Company that has exclusive responsibility pursuant to this Agreement for such Tax-Related Losses any such Tax Benefits realized (provided, that, if such Tax-Related Losses are Shared Taxes or Taxes for which more than one Company is liable under Section 7.05(c)(i), the Company that actually realizes in cash the Tax Benefit resulting from the relevant Section 336(e) Election shall pay over to each of the other Companies responsible for such Taxes the percentage of any such Tax Benefits realized that corresponds to each such Company’s percentage share of such Taxes).
Notice of Enrollment Notice shall include a list of new employees represented by the Union scheduled to attend the NEO. If practical, the City agrees to provide additional identifying information including, but not limited to, classification and department. Six months from enactment, in the event the City is unable to provide classification and department information in the Notice of Enrollment, the Union can reopen this Agreement for the sole purpose of meeting and conferring over the identifying information provided in this Section II.C.3
INSTRUCTIONS FOR COMPLETING REPAYMENT ELECTION FORM AND EXERCISING REPAYMENT OPTION Capitalized terms used and not defined herein have the meanings defined in the accompanying Repayment Election Form.
Borrowing/Election Notice The Borrower shall give the Administrative Agent an irrevocable Borrowing/Election Notice of each conversion of a Floating Rate Loan into a Eurodollar Rate Loan or continuation of a Eurodollar Rate Loan not later than 11:00 a.m. (Chicago time) three (3) Business Days prior to the date of the requested conversion or continuation, specifying: (i) the requested date (which shall be a Business Day) of such conversion or continuation; (ii) the amount and Type of the Loan to be converted or continued; and (iii) the amount of Eurodollar Rate Loan(s) into which such Loan is to be converted or continued, and the duration of the Interest Period applicable thereto.
Account Designation Letter The Administrative Agent shall have received the executed Account Designation Letter in the form of Schedule 1.1(a) hereto.
Obligor Notification Forms The Borrower shall furnish the Collateral Agent and the Administrative Agent with an appropriate power of attorney to send (at the Administrative Agent’s discretion on the Collateral Agent’s behalf, after the occurrence and during the continuance of an Event of Default or the Facility Maturity Date) Obligor notification forms to give notice to the Obligors of the Collateral Agent’s interest in the Collateral Portfolio and the obligation to make payments as directed by the Administrative Agent on the Collateral Agent’s behalf.
Joint Election As a condition of the Units granted hereunder, you agree to accept any liability for secondary Class 1 National Insurance Contributions (the “Employer NICs”), which may be payable by the Company or your Employer with respect to the Units and/or payment of the Units and issuance of Shares pursuant to the Units, the assignment or release of the Units for consideration, or the receipt of any other benefit in connection with the Units. Without limitation to the foregoing, you agree to make an election (the “Election”), in the form specified and/or approved for such election by HMRC, that the liability for your Employer NICs payments on any such gains shall be transferred to you to the fullest extent permitted by law. You further agree to execute such other elections as may be required between you and any successor to the Company and/or your Employer. You hereby authorize the Company and your Employer to withhold such Employer NICs by any of the means set forth in Section III of the Agreement. Failure by you to enter into an Election, withdrawal of approval of the Election by HMRC or a joint revocation of the Election by you and the Company or your Employer, as applicable, shall be grounds for the forfeiture and cancellation of the Units, without any liability to the Company or your Employer.
Written Election At the time you make a rollover or conversion to a Xxxx XXX, you must designate in writing to the custodian your election to treat that contribution as a rollover or conversion. Once made, the election is irrevocable.
83(b) Election You may make and file with the Internal Revenue Service an election under Section 83(b) of the Code with respect to the grant of the Restricted Shares hereunder, electing to include in your gross income as of the Grant Date the Fair Market Value of the Restricted Shares as of the Grant Date. You shall promptly provide a copy of such election to the Company. If you make and file such an election, you shall make such arrangements in accordance with Section 8 as are satisfactory to the Committee to provide for the timely payment of all applicable withholding taxes.
Application Form To apply for a pole attachment or conduit occupancy license under this Agreement, Applicant shall submit to SWBT two signed copies of the appropriate application forms. SWBT represents that the forms specified in subsections (a)-(b) are forms in use prior to the effective date of this Agreement and that SWBT is in the process of revising such forms to conform to the provisions of this Agreement and to streamline the application process. The parties therefore agree that the forms specified in subsections (a) and (b) will be interim forms only. SWBT reserves the right to change the format and content of these forms upon 60 days written notice to Applicant.
(a) To apply for a pole attachment license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make- Ready Authorization”) together with completed Form SW-9433 (“Pole Attachments”). An application for a pole attachment license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9433 and SW-9434 are attached to this Agreement as parts of APPENDIX III.
(b) To apply for a conduit occupancy license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make-Ready Authorization”) together with completed Form SW-9435 (“Conduit Occupancy”). An application for a conduit occupancy license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9434 and SW-9435 are attached to this Agreement as parts of APPENDIX III.
(c) Each application for a license under this Agreement shall include, at a minimum, the following information:
(1) the poles, ducts, and conduits (including all manholes) along Applicant’s proposed route to or within which Applicant desires to attach or place its facilities;
(2) a description of the facilities to be attached to SWBT’s poles and a description of the facilities to be placed within each component of SWBT’s conduit system (including but not limited to ducts, conduits, manholes, and handholes) along the proposed route;
(3) for poles, the proposed points of attachment;
(4) for building entrance or building distribution ducts or conduits or other space within a building, a conspicuous statement, as required by Section 5.06 of this Agreement, that the application pertains to a building entrance or building distribution duct or conduit or other space within a building;
(5) if applicable, a conspicuous notation that the space requested is not to be assigned (or billed) to Applicant until SWBT has received Applicant’s written instruction to make such assignment or issued a license authorizing Applicant to occupy the space requested; and
(6) if applicable, a conspicuous statement that Applicant intends to occupy the space before the issuance of a license, as provided in Section 8.03 of this Agreement.
(d) Facilities descriptions which apply to multiple pole attachments or conduit occupancies need only be described once on any form. Facilities descriptions shall include, at a minimum, the following information:
(1) the number and types of cables, including the physical size (diameter) and weight (weight per foot);
(2) the number and types of strands, if any, which will be used to support the cables, including the rated holding capacity expressed in thousand pound increments (e.g., 2.2M) of such strands; and
(3) sufficient information to identify and describe the physical characteristics (size, dimensions, and weight) of apparatus enclosures and other facilities to be attached to SWBT’s poles or placed in SWBT’s conduit system.
(e) When it appears to Applicant that facilities modification, capacity expansion, or make-ready work may be required to accommodate Applicant’s access requests, Applicant shall describe the facilities modification, capacity expansion, or make-ready work which Applicant proposes. Applicant shall also describe its plans, if any, to use any infrequent construction technique or connectivity solution authorized under Section 6.03 to avoid high or unusual expenditures and state its reasons for the use of such technique or solution.
(f) Applicant acknowledges that the poles along a particular pole line or route may include poles owned by firms (such as electric utilities) other than SWBT, that it may be necessary for SWBT to rearrange its facilities or perform other make-ready work on poles other than poles it owns or controls in order to accommodate Applicant’s request for access to SWBT’s poles and that, at the time an application is submitted, it may be difficult for Applicant to determine with certainty whether a particular pole is owned or controlled by SWBT or by another entity. Accordingly, the application shall, to the extent feasible, identify all poles utilized by SWBT (without regard to ownership) along Applicant’s proposed route.
(g) Each application for a license under this Agreement shall be accompanied by a construction schedule showing Applicant’s projected dates for beginning and completing construction at the sites specified in the application. Information on this schedule may be used by SWBT’s engineering and outside plant construction personnel in scheduling work required to process Applicant’s applications and scheduling such capacity expansions, make- ready work, and facilities modifications, if any, as may be necessary to accommodate Applicant’s facilities.
(h) Applicant may include multiple cables in a single license application and may provide multiple services (e.g., CATV and non-CATV services) under the same cable sheath or jacket. When both CATV and non-CATV services are provided under the same cable sheath or jacket, or CATV and non-CATV services are provided using different cables attached or lashed to the same strand or otherwise occupying the same space on a pole or the same duct or inner duct within a conduit, Applicant will so advise SWBT and SWBT shall, if permitted by law, adjust its charges to enable SWBT to charge Applicant the rate applicable to telecommunications carriers rather than the rate applicable to cable television systems solely to provide cable service.
