INSTRUCTIONS FOR COMPLETING REPAYMENT ELECTION FORM AND EXERCISING REPAYMENT OPTION. Capitalized terms used and not defined herein have the meanings defined in the accompanying Repayment Election Form.
INSTRUCTIONS FOR COMPLETING REPAYMENT ELECTION FORM AND EXERCISING REPAYMENT OPTION Sample Clauses
Related to INSTRUCTIONS FOR COMPLETING REPAYMENT ELECTION FORM AND EXERCISING REPAYMENT OPTION
Resume Self-Certification Form When submitting a response to an RFQ the Contractor shall submit with its response a completed and signed Resume Self-Certification Form (Contract Exhibit F) to the Customer for each proposed Staff member identified in the RFQ response.
Application Form To apply for a pole attachment or conduit occupancy license under this Agreement, Applicant shall submit to SWBT two signed copies of the appropriate application forms. SWBT represents that the forms specified in subsections (a)-(b) are forms in use prior to the effective date of this Agreement and that SWBT is in the process of revising such forms to conform to the provisions of this Agreement and to streamline the application process. The parties therefore agree that the forms specified in subsections (a) and (b) will be interim forms only. SWBT reserves the right to change the format and content of these forms upon 60 days written notice to Applicant. (a) To apply for a pole attachment license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make- Ready Authorization”) together with completed Form SW-9433 (“Pole Attachments”). An application for a pole attachment license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9433 and SW-9434 are attached to this Agreement as parts of APPENDIX III. (b) To apply for a conduit occupancy license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make-Ready Authorization”) together with completed Form SW-9435 (“Conduit Occupancy”). An application for a conduit occupancy license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9434 and SW-9435 are attached to this Agreement as parts of APPENDIX III. (c) Each application for a license under this Agreement shall include, at a minimum, the following information: (1) the poles, ducts, and conduits (including all manholes) along Applicant’s proposed route to or within which Applicant desires to attach or place its facilities; (2) a description of the facilities to be attached to SWBT’s poles and a description of the facilities to be placed within each component of SWBT’s conduit system (including but not limited to ducts, conduits, manholes, and handholes) along the proposed route; (3) for poles, the proposed points of attachment; (4) for building entrance or building distribution ducts or conduits or other space within a building, a conspicuous statement, as required by Section 5.06 of this Agreement, that the application pertains to a building entrance or building distribution duct or conduit or other space within a building; (5) if applicable, a conspicuous notation that the space requested is not to be assigned (or billed) to Applicant until SWBT has received Applicant’s written instruction to make such assignment or issued a license authorizing Applicant to occupy the space requested; and (6) if applicable, a conspicuous statement that Applicant intends to occupy the space before the issuance of a license, as provided in Section 8.03 of this Agreement. (d) Facilities descriptions which apply to multiple pole attachments or conduit occupancies need only be described once on any form. Facilities descriptions shall include, at a minimum, the following information: (1) the number and types of cables, including the physical size (diameter) and weight (weight per foot); (2) the number and types of strands, if any, which will be used to support the cables, including the rated holding capacity expressed in thousand pound increments (e.g., 2.2M) of such strands; and (3) sufficient information to identify and describe the physical characteristics (size, dimensions, and weight) of apparatus enclosures and other facilities to be attached to SWBT’s poles or placed in SWBT’s conduit system. (e) When it appears to Applicant that facilities modification, capacity expansion, or make-ready work may be required to accommodate Applicant’s access requests, Applicant shall describe the facilities modification, capacity expansion, or make-ready work which Applicant proposes. Applicant shall also describe its plans, if any, to use any infrequent construction technique or connectivity solution authorized under Section 6.03 to avoid high or unusual expenditures and state its reasons for the use of such technique or solution. (f) Applicant acknowledges that the poles along a particular pole line or route may include poles owned by firms (such as electric utilities) other than SWBT, that it may be necessary for SWBT to rearrange its facilities or perform other make-ready work on poles other than poles it owns or controls in order to accommodate Applicant’s request for access to SWBT’s poles and that, at the time an application is submitted, it may be difficult for Applicant to determine with certainty whether a particular pole is owned or controlled by SWBT or by another entity. Accordingly, the application shall, to the extent feasible, identify all poles utilized by SWBT (without regard to ownership) along Applicant’s proposed route. (g) Each application for a license under this Agreement shall be accompanied by a construction schedule showing Applicant’s projected dates for beginning and completing construction at the sites specified in the application. Information on this schedule may be used by SWBT’s engineering and outside plant construction personnel in scheduling work required to process Applicant’s applications and scheduling such capacity expansions, make- ready work, and facilities modifications, if any, as may be necessary to accommodate Applicant’s facilities. (h) Applicant may include multiple cables in a single license application and may provide multiple services (e.g., CATV and non-CATV services) under the same cable sheath or jacket. When both CATV and non-CATV services are provided under the same cable sheath or jacket, or CATV and non-CATV services are provided using different cables attached or lashed to the same strand or otherwise occupying the same space on a pole or the same duct or inner duct within a conduit, Applicant will so advise SWBT and SWBT shall, if permitted by law, adjust its charges to enable SWBT to charge Applicant the rate applicable to telecommunications carriers rather than the rate applicable to cable television systems solely to provide cable service.
OPTION TO ELECT REPAYMENT The undersigned hereby irrevocably request(s) and instruct(s) the Company to repay this Security (or portion hereof specified below) pursuant to its terms at a price equal to 100% of the principal amount hereof to be repaid, together with accrued and unpaid interest hereon, payable to the date of repayment, to the undersigned, at . (Please print or typewrite name and address of the undersigned) For this Security to be repaid, the undersigned must give to the Trustee at 000 Xxxx Xxxxxx - Xxxxx 0000, Xxx Xxxx, XX 00000, Attn: Corporate Trust Administration, or at such other place or places of which the Company shall from time to time notify the Holders of the Securities, not more than 60 days nor less than 30 days prior to the date of repayment, this Security with this "Option to Elect Repayment" form duly completed. If less than the entire principal amount of this Security is to be repaid, specify the portion hereof (which shall be increments of US$1,000) which the holder elects to have repaid and specify the denomination or denominations (which shall be an Authorized Denomination) of the Securities to be issued to the holder for the portion of this Security not being repaid (in the absence of any such specification, one such Security will be issued for the portion not being repaid): US$ Signature Dated: NOTICE: The signature on this "Option to Elect Repayment" form must correspond with the name as written upon the face of the within Security in every particular, without alteration or enlargement or any change whatsoever. NOTICE: The signature(s) should be guaranteed by an eligible guarantor institution (banks, stockbrokers, savings and loan associations, and credit unions with membership in an approved signature guarantee medallion program), pursuant to Rule 17Ad-15 under the Securities Exchange Act of 1934. The following abbreviations, when used in the inscription on the face of the within Security, shall be construed as though they were written out in full according to applicable laws or regulations. TEN COM - as tenants in common TEN ENT - as tenants by the entireties JT TEN - as joint tenants with right of survivorship and not as tenants in common UNIF GIFT MIN ACT- Custodian (Cust) (Minor) FOR VALUE RECEIVED, the undersigned hereby sell(s), assign(s) and transfer(a) unto: PLEASE INSERT SOCIAL SECURITY NUMBER OR OTHER IDENTIFYING NUMBER OF ASSIGNEE the within Security and all rights thereunder, and hereby irrevocably constitutes and appoints to transfer said Security on the books of the Company, with full power of substitution in the premises. Dated:
Repayment Schedule Repayments shall be made semiannually (twice per year). The Semiannual Loan Payment shall be computed based upon the principal amount of the Loan plus the estimated Loan Service Fee and the principle of level debt service. The Semiannual Loan Payment amount may be adjusted, by amendment of this Agreement, based upon revised information. After the final disbursement of Loan proceeds, the Semiannual Loan Payment shall be based upon the actual Project costs, the actual Loan Service Fee and the Loan Service Fee capitalized interest, if any, and actual dates and amounts of disbursements, taking into consideration any previous payments. Actual Project costs shall be established after the Department's inspection of the completed Project and associated records. The Department will deduct the Loan Service Fee and any associated interest from the first available repayments following the Final Amendment. Each Semiannual Loan Payment shall be in the amount of $140,599 until the payment amount is adjusted by amendment. The interest portion of each Semiannual Loan Payment shall be computed on the unpaid balance of the principal amount of the Loan, including Capitalized Interest. Interest also shall be computed on the unpaid balance of the Loan Service Fee. Interest shall be computed as of the due date of each Semiannual Loan Payment. Semiannual Loan Payments shall be received by the Department beginning on October 15, 2021 and semiannually thereafter on April 15 and October 15 of each year until all amounts due hereunder have been fully paid. Funds transfer shall be made by electronic means. The Semiannual Loan Payment amount is based on the total amount to be repaid of $5,105,900, which consists of the Loan principal and the estimated Loan Service Fee.
Notification of Disbursement Method Form Pursuant to the Project Agreement executed for this loan, there are two methods by which funds can be disbursed. The first method is for the Ohio Public Works Commission (OPWC) to pay vendors directly. The second method is for the Commission to reimburse the subdivision after project costs have been incurred and paid by the subdivision. For loans only, the OPWC needs to be formally notified in advance as to which method the subdivision plans to utilize. Please refer to the enclosure entitled "Notification of Disbursement Method" and the accompanying "Instructions for Declaring Official Intent". In deciding which method to use please consider the following: • Discuss your disbursement options and preferences with your Project Manager, Xxxxx Xxxxx, prior to making a selection. • Passing a Resolution of Intent for the entire loan amount doesn't do you any harm and can actually be beneficial in the event the Commission needs to reimburse the subdivision in the event of an overpayment. • At any point during the life of the project you can always have the OPWC pay contractors directly even if you have passed a Resolution. • If you need to pass a Resolution, we encourage subdivisions to do so as early as possible. At a minimum, a Resolution must be adopted no later than 60 days after the date of construction related project costs for which the subdivision will seek reimbursement from us.
Payment Options The exercise price shall be paid by one or any combination of the following forms of payment that are applicable to this option, as indicated on the cover page hereof: (i) by check payable to the order of the Company; or (ii) delivery of an irrevocable and unconditional undertaking, satisfactory in form and substance to the Company, by a creditworthy broker to deliver promptly to the Company sufficient funds to pay the exercise price, or delivery by the Optionee to the Company of a copy of irrevocable and unconditional instructions, satisfactory in form and substance to the Company, to a creditworthy broker to deliver promptly to the Company cash or a check sufficient to pay the exercise price; or (iii) subject to Section 7(b) below, if the Common Stock is then traded on a national securities exchange or on the Nasdaq National Market (or successor trading system), by delivery of shares of Common Stock having a fair market value equal as of the date of exercise to the option price. In the case of (iii) above, fair market value as of the date of exercise shall be determined as of the last business day for which such prices or quotes are available prior to the date of exercise and shall mean (i) the last reported sale price (on that date) of the Common Stock on the principal national securities exchange on which the Common Stock is traded, if the Common Stock is then traded on a national securities exchange; or (ii) the last reported sale price (on that date) of the Common Stock on the Nasdaq National Market (or successor trading system), if the Common Stock is not then traded on a national securities exchange.
Optional Repayment If so indicated in the Accumulation Fund Schedule, GLAIC shall pay to the Policyholder the amount the Policyholder needs to redeem or repay any notes or other instruments issued by the Policyholder and backed by this Policy, pursuant to any limited right of redemption or repayment contained in such note or instrument. GLAIC may require reasonable evidence that the redemption or repayment request satisfies all the terms and conditions described in the prospectus, prospectus supplement and/or pricing supplement applicable to such note or other instrument. Additional restrictions, if any, on the Policyholder’s reimbursement rights under this Section may be included in the Accumulation Fund Schedule.
Qualified Joint and Survivor Annuity Unless an optional form of benefit is selected pursuant to a qualified election within the 90-day period ending on the annuity starting date, a married Participant's Vested account balance will be paid in the form of a qualified joint and survivor annuity and an unmarried Participant's Vested account balance will be paid in the form of a life annuity. The Participant may elect to have such annuity distributed upon attainment of the earliest retirement age under the Plan.
Joint Election As a condition of the Units granted hereunder, you agree to accept any liability for secondary Class 1 National Insurance Contributions (the “Employer NICs”), which may be payable by the Company or your Employer with respect to the Units and/or payment of the Units and issuance of Shares pursuant to the Units, the assignment or release of the Units for consideration, or the receipt of any other benefit in connection with the Units. Without limitation to the foregoing, you agree to make an election (the “Election”), in the form specified and/or approved for such election by HMRC, that the liability for your Employer NICs payments on any such gains shall be transferred to you to the fullest extent permitted by law. You further agree to execute such other elections as may be required between you and any successor to the Company and/or your Employer. You hereby authorize the Company and your Employer to withhold such Employer NICs by any of the means set forth in Section III of the Agreement. Failure by you to enter into an Election, withdrawal of approval of the Election by HMRC or a joint revocation of the Election by you and the Company or your Employer, as applicable, shall be grounds for the forfeiture and cancellation of the Units, without any liability to the Company or your Employer.
Designation of Beneficiary The depositor may designate a beneficiary or beneficiaries to receive benefits from the custodial account in the event of the depositor’s death. In the event the depositor has not designated a beneficiary, or if all beneficiaries shall predecease the depositor, the following persons shall take in the order named: a. The spouse of the depositor; b. If the spouse shall predecease the depositor or if the depositor does not have a spouse, then to the depositor’s estate.
