ECMs Submittals. ECMs submittals shall provide sufficient detail to allow the University to complete the reviews described in Section 2.2.2, and shall include: drawings, plans, specifications, shop drawings, product data, and where appropriate or reasonably required, product samples. At the request of the University, and where appropriate or reasonably required, the ESCO shall provide on-site "mock-ups" and demonstrations of the ECMs at the Facility which shall also be construed as ECM submittals under the provisions of this paragraph. 2.3.1 Submittals shall include: 2.3.1.1 Date and revision dates; 2.3.1.2 Project number and title; 2.3.1.3 Names, as applicable, of the University representatives, subcontractor, sub-subcontractor, supplier, manufacturer or detailer; 2.3.1.4 Identification of product or material; 2.3.1.5 Relation to adjacent structure or material; 2.3.1.6 Field dimensions, clearly identified; 2.3.1.7 Specification page and number; 2.3.1.8 Specified standards, such as ASTM or ANSI; 2.3.1.9 Identification of previously approved deviation from Project documents; 2.3.1.10 Stamp or seal of the preparer of the ECM submittal, in accordance with Section 3.5.1, and the ESCO’s certification that it has reviewed and approved the submittal as to its accuracy and compliance with the provisions of this Agreement; and 2.3.1.11 Drawings, plans, specifications, shop drawings, product data, and where appropriate or reasonably required, product samples. Within ten (10) business days of receipt of the submittals, the University shall complete its review of the submittals and provide written approval of the submittal or if the submittal has not been approved, written explanation as to the reason therefore. The ESCO shall submit a revised submittal within ten (10) business days to the University for review and approval and the University shall have ten (10) business days from receipt thereof to complete its review of the revised submittal. The ESCO shall be responsible for any delays caused by rejection of incomplete or inadequate submittals. The ESCO may not commence any of the work which requires the submittals without written approval by the University. The ESCO’s responsibility for errors, omissions, deviation from existing conditions, or deviation from the Project Documents in submittals is not relieved by the University’s review and approval thereof.
Appears in 3 contracts
Samples: Energy Services Agreement, Energy Services Agreement, Energy Services Agreement
ECMs Submittals. ECMs submittals shall provide sufficient detail to allow the
a) Date and revision dates.
b) Project Number and Title.
c) Names, as applicable, of the University Institution representatives, subcontractor, sub- subcontractor, supplier, manufacturer or detailer.
d) Identification of product or material.
e) Relation to complete adjacent structure or material.
f) Field Dimensions, clearly identified.
g) Specification page and number.
h) Specified standards, such as ASTM or ANSI.
i) Identification of previously approved deviation from Project documents.
j) Stamp or seal of the reviews described in Section 2.2.2preparer of the ECM submittal, and shall include: drawingsthe Company’s certification that it has reviewed and approved the submittal as to its accuracy and compliance with the provisions of this Agreement.
k) Drawings, plans, specifications, shop drawings, product data, and where appropriate or reasonably required, product samples. At the request of the UniversityINSTITUTION, and where appropriate or reasonably required, the ESCO COMPANY shall provide on-site "mock-ups" and demonstrations of the ECMs at the Facility Premises which shall also be construed as ECM submittals under the provisions of this paragraph.
2.3.1 Submittals shall include:
2.3.1.1 Date and revision dates;
2.3.1.2 Project number and title;
2.3.1.3 Names, as applicable, of the University representatives, subcontractor, sub-subcontractor, supplier, manufacturer or detailer;
2.3.1.4 Identification of product or material;
2.3.1.5 Relation to adjacent structure or material;
2.3.1.6 Field dimensions, clearly identified;
2.3.1.7 Specification page and number;
2.3.1.8 Specified standards, such as ASTM or ANSI;
2.3.1.9 Identification of previously approved deviation from Project documents;
2.3.1.10 Stamp or seal of the preparer of the ECM submittal, in accordance with Section 3.5.1, and the ESCO’s certification that it has reviewed and approved the submittal as to its accuracy and compliance with the provisions of this Agreement; and
2.3.1.11 Drawings, plans, specifications, shop drawings, product data, and where appropriate or reasonably required, product samples. Within ten (10( ) business days of receipt of the submittals, the University INSTITUTION shall complete its review of the submittals and provide written approval of the submittal submittal, or if the submittal has not been approved, written explanation as to the reason thereforetherefor. The ESCO COMPANY shall submit a revised submittal within ten (10) business days to the University INSTITUTION for review and approval and the University INSTITUTION shall have ten (10) business days from receipt thereof to complete its review of the revised submittal. The ESCO COMPANY shall be responsible for any delays caused by rejection of incomplete or inadequate submittals. The ESCO COMPANY may not commence any of the work Work which requires the submittals without written approval by the UniversityINSTITUTION. The ESCOCOMPANY’s responsibility for errors, omissions, deviation from existing conditions, or deviation from the Project Documents in submittals is not relieved by the University’s INSTITUTION’S review and approval thereof.
Appears in 1 contract
Samples: Energy Services Agreement
