Common use of Electric Distributors Clause in Contracts

Electric Distributors. In addition to any of the foregoing responsibilities that may be applicable, each Member that is an Electric Distributor, whether or not that Member votes in the Members Committee in the Electric Distributor sector or meets the eligibility requirements for any other sector of the Members Committee, shall: (a) Accept, comply with or be compatible with all standards applicable within the PJM Control Area with respect to system design, equipment ratings, operating practices and maintenance practices as set forth in the PJM Manuals, or be subject to an interconnected Member's requirements relating to the foregoing, so that sufficient electrical equipment, control capability, information and communication are available to the Office of the Interconnection for planning and operation of the PJM Control Area; (b) Assure the continued compatibility of its local system energy management system monitoring and telecommunications systems to satisfy the technical requirements of interacting automatically or manually with the Office of the Interconnection as it directs the operation of the PJM Control Area; (c) Maintain or arrange for a portion of its connected load to be subject to control by automatic underfrequency, under- voltage, or other load-shedding devices at least equal to the levels established pursuant to the Reliability Assurance Agreement, or be subject to another Member's control for these purposes; (d) Provide or arrange for sufficient reactive capability and voltage control facilities to conform to Good Utility Practice and (i) to meet the reactive requirements of its system and customers and (ii) to maintain adequate voltage levels and the stability required by the bulk power supply facilities of the Interconnection; (e) Shed connected load, share Capacity Resources, initiate active load management programs, and take such other coordination actions as may be necessary in accordance with the directions of the Office of the Interconnection in Emergencies; (f) Maintain or arrange for a portion of its Capacity Resources at least equal to the level established pursuant to the Reliability Assurance Agreement to have the ability to go from a shutdown condition to an operating condition and start delivering power without assistance from the power system; (g) Provide or arrange through another Member for the services of a 24-hour local control center to coordinate with the Office of the Interconnection, each such control center to be furnished with appropriate telemetry equipment as specified in the PJM Manuals, and to be staffed by system operators trained and delegated sufficient authority to take any action necessary to assure that the system for which the operator is responsible is operated in a stable and reliable manner; (h) Provide to the Office of the Interconnection all System, accounting, customer tracking, load forecasting and other data necessary or appropriate to implement or administer this Agreement or the Reliability Assurance Agreement; and (i) Comply with the underfrequency relay obligations and charges specified in Schedule 7 of this Agreement.

Electric Distributors. In addition to any of the foregoing responsibilities that may be applicable, each Member that is an Electric Distributor, whether or not that Member votes in the Members Committee in the Electric Distributor sector or meets the eligibility requirements for any other sector of the Members Committee, shall: (a) Accept, comply with or be compatible with all standards applicable within the PJM Control Area with respect to system design, equipment ratings, operating practices and maintenance practices as set forth in the PJM Manuals, or be subject to an interconnected Member's requirements relating to the foregoing, so that sufficient electrical equipment, control capability, information and communication are available to the Office of the Interconnection for planning and operation of the PJM Control Area; (b) Assure the continued compatibility of its local system energy management system monitoring and telecommunications systems to satisfy the technical requirements of interacting automatically or manually with the Office of the Interconnection as it directs the operation of the PJM Control Area; (c) Maintain or arrange for a portion of its connected load to be subject to control by automatic underfrequency, under- under-voltage, or other load-shedding devices at least equal to the levels established pursuant to the Reliability Assurance Agreement, or be subject to another Member's control for these purposes; (d) Provide or arrange for sufficient reactive capability and voltage control facilities to conform to Good Utility Practice and (i) to meet the reactive requirements of its system and customers and (ii) to maintain adequate voltage levels and the stability required by the bulk power supply facilities of the Interconnection; (e) Shed connected load, share Capacity Resources, initiate active load management programs, and take such other coordination actions as may be necessary in accordance with the directions of the Office of the Interconnection in Emergencies; (f) Maintain or arrange for a portion of its Capacity Resources at least equal to the level established pursuant to the Reliability Assurance Agreement to have the ability to go from a shutdown condition to an operating condition and start delivering power without assistance from the power system; (g) Provide or arrange through another Member for the services of a 24-hour local control center to coordinate with the Office of the Interconnection, each such control center to be furnished with appropriate telemetry equipment as specified in the PJM Manuals, and to be staffed by system operators trained and delegated sufficient authority to take any action necessary to assure that the system for which the operator is responsible is operated in a stable and reliable manner; (h) Provide to the Office of the Interconnection all System, accounting, customer tracking, load forecasting (including all load to be served from its System) and other data necessary or appropriate to implement or administer this Agreement or the Reliability Assurance Agreement; and (i) Comply with the underfrequency relay obligations and charges specified in Schedule 7 of this Agreement.

Electric Distributors. In addition to any of the foregoing responsibilities that may be applicable, each Member that is an Electric Distributor, whether or not that Member votes in the Members Committee in the Electric Distributor sector or meets the eligibility requirements for any other sector of the Members Committee, shall: (a) Accept, comply with or be compatible with all standards applicable within the PJM Control Area with respect to system design, equipment ratings, operating practices and maintenance practices as set forth in the PJM Manuals, or be subject to an interconnected Member's requirements relating to the foregoing, so that sufficient electrical equipment, control capability, information and communication are available to the Office of the Interconnection for planning and operation of the PJM Control Area; (b) Assure the continued compatibility of its local system energy management system monitoring and telecommunications systems to satisfy the technical requirements of interacting automatically or manually with the Office of the Interconnection as it directs the operation of the PJM Control Area; (c) Maintain or arrange for a portion of its connected load to be subject to control by automatic underfrequency, under- under-voltage, or other load-load- shedding devices at least equal to the levels established pursuant to the Reliability Assurance Agreement, or be subject to another Member's control for these purposes; (d) Provide or arrange for sufficient reactive capability and voltage control facilities to conform to Good Utility Practice and (i) to meet the reactive requirements of its system and customers and (ii) to maintain adequate voltage levels and the stability required by the bulk power supply facilities of the Interconnection; (e) Shed connected load, share Capacity Resources, initiate active load management programs, and take such other coordination actions as may be necessary in accordance with the directions of the Office of the Interconnection in Emergencies; (f) Maintain or arrange for a portion of its Capacity Resources at least equal to the level established pursuant to the Reliability Assurance Agreement to have the ability to go from a shutdown condition to an operating condition and start delivering power without assistance from the power system; (g) Provide or arrange through another Member for the services of a 24-24- hour local control center to coordinate with the Office of the Interconnection, each such control center to be furnished with appropriate telemetry equipment as specified in the PJM Manuals, and to be staffed by system operators trained and delegated sufficient authority to take any action necessary to assure that the system for which the operator is responsible is operated in a stable and reliable manner; (h) Provide to the Office of the Interconnection all System, accounting, customer tracking, load forecasting and other data necessary or appropriate to implement or administer this Agreement or the Reliability Assurance Agreement; and (i) Comply with the underfrequency relay obligations and charges specified in Schedule 7 of this Agreement.

Electric Distributors. In addition to any of the foregoing responsibilities that may be applicable, each Member that is an Electric Distributor, whether or not that Member votes in the Members Committee in the Electric Distributor sector or meets the eligibility requirements for any other sector of the Members Committee, shall: (a) Accept, comply with or be compatible with all standards applicable within the PJM Control Area with respect to system design, equipment ratings, operating practices and maintenance practices as set forth in the PJM Manuals, or be subject to an interconnected Member's requirements relating to the foregoing, so that sufficient electrical equipment, control capability, information and communication are available to the Office of the Interconnection for planning and operation of the PJM Control Area; (b) Assure the continued compatibility of its local system energy management system monitoring and telecommunications systems to satisfy the technical requirements of interacting automatically or manually with the Office of the Interconnection as it directs the operation of the PJM Control Area; (c) Maintain or arrange for a portion of its connected load to be subject to control by automatic underfrequency, under- under-voltage, or other load-shedding devices at least equal to the levels established pursuant to the Reliability Assurance Agreement, or be subject to another Member's control for these purposes; (d) Provide or arrange for sufficient reactive capability and voltage control facilities to conform to Good Utility Practice and (i) to meet the reactive requirements of its system and customers and (ii) to maintain adequate voltage levels and the stability required by the bulk power supply facilities of the Interconnection; (e) Shed connected load, share Capacity Resources, initiate active load management programs, and take such other coordination actions as may be necessary in accordance with the directions of the Office of the Interconnection in Emergencies; (f) Maintain or arrange for a portion of its Capacity Resources at least equal to the level established pursuant to the Reliability Assurance Agreement to have the ability to go from a shutdown condition to an operating condition and start delivering power without assistance from the power system; (g) Provide or arrange through another Member for the services of a 24-hour local control center to coordinate with the Office of the Interconnection, each such control center to be furnished with appropriate telemetry equipment as specified in the PJM Manuals, and to be staffed by system operators trained and delegated sufficient authority to take any action necessary to assure that the system for which the operator is responsible is operated in a stable and reliable manner; (h) Provide to the Office of the Interconnection all System, accounting, customer tracking, load forecasting and other data necessary or appropriate to implement or administer this Agreement or the Reliability Assurance Agreement; and (i) Comply with the underfrequency relay obligations and charges specified in Schedule 7 of this Agreement.

Electric Distributors. In addition to any of the foregoing responsibilities that may be applicable, each Member that is an Electric Distributor, whether or not that Member votes in the Members Committee in the Electric Distributor sector or meets the eligibility requirements for any other sector of the Members Committee, shall: (a) Accept, comply with or be compatible with all standards applicable within the PJM Control Area with respect to system design, equipment ratings, operating practices and maintenance practices as set forth in the PJM Manuals, or be subject to an interconnected Member's requirements relating to the foregoing, so that sufficient electrical equipment, control capability, information and communication are available to the Office of the Interconnection for planning and operation of the PJM Control Area; (b) Assure the continued compatibility of its local system energy management system monitoring and telecommunications systems to satisfy the technical requirements of interacting automatically or manually with the Office of the Interconnection as it directs the operation of the PJM Control Area; (c) Maintain or arrange for a portion of its connected load to be subject to control by automatic underfrequency, under- under-voltage, or other load-load- shedding devices at least equal to the levels established pursuant to the Reliability Assurance Agreement, or be subject to another Member's control for these purposes; (d) Provide or arrange for sufficient reactive capability and voltage control facilities to conform to Good Utility Practice and (i) to meet the reactive requirements of its system and customers and (ii) to maintain adequate voltage levels and the stability required by the bulk power supply facilities of the Interconnection; (e) Shed connected load, share Capacity Resources, initiate active load management programs, and take such other coordination actions as may be necessary in accordance with the directions of the Office of the Interconnection in Emergencies; (f) Maintain or arrange for a portion of its Capacity Resources at least equal to the level established pursuant to the Reliability Assurance Agreement to have the ability to go from a shutdown condition to an operating condition and start delivering power without assistance from the power system; (g) Provide or arrange through another Member for the services of a 24-hour local control center to coordinate with the Office of the Interconnection, each such control center to be furnished with appropriate telemetry equipment as specified in the PJM Manuals, and to be staffed by system operators trained and delegated sufficient authority to take any action necessary to assure that the system for which the operator is responsible is operated in a stable and reliable manner; (h) Provide to the Office of the Interconnection all System, accounting, customer tracking, load forecasting and other data necessary or appropriate to implement or administer this Agreement or the Reliability Assurance Agreement; and (i) Comply with the underfrequency relay obligations and charges specified in Schedule 7 of this Agreement.

Electric Distributors. In addition to any of the foregoing responsibilities that may be applicable, each Member that is an Electric Distributor, whether or not that Member votes in the Members Committee in the Electric Distributor sector or meets the eligibility requirements for any other sector of the Members Committee, shall: (a) Accept, comply with or be compatible with all standards applicable within the PJM Control Area Region with respect to system design, equipment ratings, operating practices and maintenance practices as set forth in the PJM Manuals, or be subject to an interconnected Member's ’s requirements relating to the foregoing, so that sufficient electrical equipment, control capability, information and communication are available to the Office of the Interconnection for planning and operation of the PJM Control AreaRegion; (b) Assure the continued compatibility of its local system energy management system monitoring and telecommunications systems to satisfy the technical requirements of interacting automatically or manually with the Office of the Interconnection as it directs the operation of the PJM Control AreaRegion; (c) Maintain or arrange for a portion of its connected load to be subject to control by automatic underfrequency, under- under-voltage, or other load-shedding devices at least equal to the levels established pursuant to the Reliability Assurance Agreement, or be subject to another Member's ’s control for these purposes; (d) Provide or arrange for sufficient reactive capability and voltage control facilities to conform to Good Utility Practice and (i) to meet the reactive requirements of its system and customers and (ii) to maintain adequate voltage levels and the stability required by the bulk power supply facilities of the InterconnectionPJM Region; (e) Shed connected load, share Generation Capacity Resources, initiate active load management programs, Resources and take such other coordination actions as may be necessary in accordance with the directions of the Office of the Interconnection in Emergencies; (f) Maintain or arrange for a portion of its Generation Capacity Resources at least equal to the level established pursuant to the Reliability Assurance Agreement to have the ability to go from a shutdown condition to an operating condition and start delivering power without assistance from the power system; (g) Provide or arrange through another Member for the services of a 24-hour local control center to coordinate with the Office of the Interconnection, each such control center to be furnished with appropriate telemetry equipment as specified in the PJM Manuals, and to be staffed by system operators trained and delegated sufficient authority to take any action necessary to assure that the system for which the operator is responsible is operated in a stable and reliable manner. In addition to meeting any training standards and requirements specified in this Agreement, local control center staff shall be required to meet applicable training standards and requirements in PJM Manual 40, Control Center Requirements, including the PJM System Operator Training Requirements in Attachment C; (h) Provide to the Office of the Interconnection all System, accounting, customer tracking, load forecasting (including all load to be served from its System) and other data necessary or appropriate to implement or administer this Agreement or Agreement, and the Reliability Assurance Agreement; and (i) Comply with the underfrequency relay obligations and charges specified in Operating Agreement, Schedule 7 of this Agreement.