Electrical Worker Grade 3 Sample Clauses

Electrical Worker Grade 3. ▪ An Electrical Worker Grade 3 is an Employee who works under direction, may be required to perform the work of an Electrical Worker Grade 2; and ▪ Without limiting the scope of the work the Employee may perform the work described below to the level of the Employee’s training: ▪ Is engaged in storework; or ▪ Is qualified and required to drive or operate the Employer’s vehicles, machinery, plant or equipment incidental to the Employee’s primary task or functions; or ▪ Inspects and tests fire alarm or security alarm equipment; or ▪ Under the supervision of a tradesperson or electronics serviceperson: ▪ Installs radio, communications and related equipment including antenna; or ▪ Installs fire alarm or security alarm equipment; or ▪ Installs data and communication cabling; ▪ Provided that this person shall not undertake tasks requiring the skills of a tradesperson.
AutoNDA by SimpleDocs
Electrical Worker Grade 3. An “Electrical Worker Grade 3” is an Employee who works under direction, may be required to perform the work of an electrical worker Grade 2; and Without limiting the scope of the work performs the work described below to the level of his/her training; a) Is engaged in store work; or b) Is qualified and required to drive or operate machinery, plant or equipment incidental to his/her primary task or functions; or c) Inspects and test fire alarm or security alarm equipment; or d) Under the supervision of a tradesperson or electronics serviceperson; • Installs radio, communications and related equipment including antenna; or • Installs fire alarm or security alarm equipment; or • Installs data and communication cabling. e) Provided that this person shall not undertake tasks requiring skills of a tradesperson.
Electrical Worker Grade 3. An Electrical Worker Grade 3 is an employee who works under direction, may be required to perform the work of an Electrical Worker Grade 2 and (a) without limiting the scope of the work, the employee may perform the work described below to the level of their training: is engaged in store work; or is qualified and required to drive or operate the employer's machinery, plant or equipment incidental to their primary task or functions, including truck attendants; or inspects and tests fire alarm or security alarm equipment; or under the supervision of a tradesperson or electronics serviceperson; • installs radio, communications and related equipment including antenna; or • installs fire alarm or security alarm equipment; or • installs data and communication cabling (b) provided that this person shall not undertake tasks requiring the skills of a tradesperson. Included in this Grade is the work of: (a) Electronic Equipment Tester/Installer Level 1; and (b) Purchasing clerk. G4 - Electrical Worker Grade 41 An Electrical Worker Grade 4 is an employee who:
Electrical Worker Grade 3. A.3.1 An Electrical Worker Grade 3 is an Employee who works under direction and may be required to perform the work of an Electrical Worker Grade 2. A.3.2 Without limiting the scope of the work, the Employee may perform the following tasks to the level of the Employee’s training:  Store work  Drive or operate the Company’s vehicles, machinery, plant or equipment incidental to the Employee’s primary task or functions  Inspect and test fire alarm or security alarm equipment. Alternatively, the Employee works under the supervision of a tradesperson or electronics serviceperson to: o Install radio, communications and related equipment including antenna o Install fire alarm or security alarm equipment o Install data and communication cabling. A.3.3 Provided that the Employee must not undertake tasks requiring the skills of a tradesperson.
Electrical Worker Grade 3. 3.1 An Electrical Worker Grade 3 is an employee who works under direction, may be required to perform the work of an electrical worker Grade 2; and 3.2 Without limiting the scope of the work the employee may perform the work described below to the level of the employee’s training: (a) Is engaged in storework; or (b) Is qualified and required to drive or operate the Company’s vehicles, machinery, plant or equipment incidental to the employee’s primary task or functions; or (c) Inspects and tests fire alarm or security alarm equipment; or 3.3 Under the supervision of a tradesperson or electronics serviceperson: (a) Installs radio, communications and related equipment including antenna; or (b) Installs fire alarm or security alarm equipment; or (c) Installs data and communication cabling; 3.4 Provided that this person shall not undertake tasks requiring the skills of a tradesperson.
Electrical Worker Grade 3. ▪ An Electrical Worker Grade 3 is an Employee who works under direction, may be required to perform the work of an Electrical Worker Grade 2; and ▪ Without limiting the scope of the work the Employee may perform the work described below to the level of the Employee’s training: ▪ Is engaged in storework; or ▪ Is directly in charge of an electrical store and responsible for materials, ordering and purchasing; or ▪ Included in this grade is the work of purchasing clerk/storeperson and electronic equipment installer Level 2. ▪ Is qualified and required to drive or operate the Employer’s vehicles, machinery, plant or equipment incidental to the Employee’s primary task or functions; or ▪ Inspects and tests fire alarm or security alarm equipment; or ▪ Under the supervision of a tradesperson or electronics serviceperson: ▪ Installs radio, communications and related equipment including antenna; or ▪ Installs fire alarm or security alarm equipment; or ▪ Installs data and communication cabling; ▪ Provided that this person shall not undertake tasks requiring the skills of a tradesperson.
Electrical Worker Grade 3. 2.3.1 An Electrical Worker Grade 3 is an employee who works under direction, may be required to perform the work of an electrical worker Grade 2; and 2.3.2 Without limiting the scope of the work the employee may perform the work described below to the level of the employee’s training: (a) Is engaged in storework; or
AutoNDA by SimpleDocs

Related to Electrical Worker Grade 3

  • Electrical Equipment Residents must use only CSA, UL-approved or Canadian-certified electrical equipment; the rated wattage of light fixtures must never be exceeded; and only replacement bulbs supplied by Waterloo maintenance staff may be used. Do not leave any unattended electrical equipment turned on (i.e. hair straighteners, lights etc.)

  • Electrical Service Electrical service for new construction or a renovated existing building shall be 480/277-volt, 3-phase, 4-wire or approved equal. Service shall be sized for HVAC and other mechanical system(s) loads, lighting, general building services, and dedicated computer based office equipment loads. 5 xxxxx per square foot shall be provided for lighting and general service receptacles. Size of neutral conductor of 3- phase circuits shall be twice that of phase conductor to accommodate potential harmonic currents associated with computer system electronic power supplies and fluorescent lighting fixtures electronic ballasts.

  • Electrical appliance safety The Hirer shall ensure that any electrical appliances brought by them to the premises and used there shall be safe, in good working order, and used in a safe manner in accordance with the Electricity at Work Regulations 1989. Where a residual circuit breaker is provided the hirer must make use of it in the interests of public safety.

  • Contractor’s Equipment The Contractor shall be responsible for all Contractor’s Equipment. The Contractor’s Equipment shall be deemed to be exclusively intended for the execution of the Works.

  • FURNITURE CLASSIFICATIONS Furniture classifications include but not limited to: Cafeteria, Dormitory, Library Shelving and Library Related, Lounge, Systems (Modular), School (Classroom), Freestanding, Seating, Filing Systems and Equipment, and Technology Support.

  • System Upgrade Facilities Transmission Owner shall design, procure, construct, install, and own the System Upgrade Facilities described in Appendix A hereto. The responsibility of the Developer for costs related to System Upgrade Facilities shall be determined in accordance with the provisions of Attachment S to the NYISO OATT.

  • Electrical Provide drawings for the following systems: .1 Lighting including circuiting and luminaire identification and switching. Also provide illuminance computer printout for all indoor typical indoor spaces and parking lots. .2 Convenience outlets and circuiting, special outlets and circuiting, television outlets, and power systems and equipment. Provide riser diagrams for all electrical systems including master clock, intercom, fire alarm, ITV, computer networking/telephone. Also, provide for emergency and normal power distribution. Provide luminaire schedule. .3 Panel schedule may be in preliminary form but circuitry must be included. .4 Applicable installation details. .5 General legend and list of abbreviations. .6 Voltage drop computation for all main feeders. .7 Short circuit analysis .8 Provide 1/2" scale floor plan and wall elevations for all electrical rooms.

  • Electrical connections Equipment requiring electrical connections for operation shall either be hard wired to the Authorized User's provided connections or the Contractor shall be responsible for a male electrical union. All connections shall be made by the Contractor and accomplished in accordance with National Electrical Code requirements. Electrically operated equipment shall be available in the following volts and phases: 208 volt 1 or 3 phase, 60 HZ 220 volt 1 or 3 phase, 60 HZ 440 volt 1 or 3 phase, 60 HZ

  • Weekend Worker A weekend schedule may be developed in order to meet the Home’s need for weekend staff, and individual employees’ preference for a weekend work schedule. A weekend schedule is defined as a schedule in which a full-time weekend worker works a weekly average of thirty (30) hours and is paid for 37.5 hours at their regular straight time hourly rate. The schedule must include two 11.25-hour tours, which fall within a weekend period as determined by the Home and the Union. An employee working a weekend schedule will work every weekend except as provided for in the provisions below. The Employer and the Union may agree to implement weekend worker position(s) if sixty-six and two thirds’ percent (66⅔%) of the full-time and part-time employees who work in the facility/unit are in agreement. The introduction of that schedule and the manner in which the position(s) are filled, shall be determined by the local parties. This schedule may be discontinued by either party with notice as determined by the local parties. The opportunity for an individual employee to discontinue this schedule shall be resolved by the local parties. Notwithstanding the voting mechanism above, a three (3) month trial period (or longer period, where agreed by the Home and the Union) for a weekend worker arrangement may be implemented without a vote in circumstances where the following additional conditions apply: ▪ An RN (or RNs) volunteers or applies for a weekend worker position and the Home and the Union agrees to accept the request. ▪ The work schedule will be modified to accommodate such a request provided there is no reduction in the regularly scheduled hours of the other RNs in the bargaining unit. ▪ Prior to the conclusion of the trial period, representatives of the Home and of the Union will evaluate and discuss the outcomes. Each Home must have the majority agreement of the full-time and part-time employees who vote on the issue to agree on a trial period of up to six months. Once the trial period is complete, each Home must have a minimum of 66⅔% agreement of the full-time and part-time employees who vote on the issue to continue with the new schedule on a permanent basis. (a) Weekend and shift premiums shall not be paid.

  • Closet I Urinal Requirements Employees Closets Urinals

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!