Common use of ESD and WOL Plan Clause in Contracts

ESD and WOL Plan. The plan prepared by the Subcontractor and finalised under clause 8.7, which must set out in adequate detail all procedures the Subcontractor will implement to manage the Subcontractor's Activities and the Subcontract Works from an ESD and WOL perspective to: ensure compliance with the Smart Infrastructure Handbook and Statutory Requirements; and xxxxxxxx the achievement of the ESD Principles and the WOL Objectives. The ESD and WOL Plan must not be inconsistent with the Contractor’s ESD and WOL Plan and must address, at a minimum: all matters in the Smart Infrastructure Handbook and the Sustainable Procurement Guide; all Statutory Requirements; all ESD Principles and WOL Objectives; the roles and responsibilities of all Subcontractor and subsubcontractor personnel (including the ESD and WOL Manager and the Subcontractor's key people under clause 2.3) regarding ESD and WOL; the procedure for consultation, cooperation and coordination of activities with the Commonwealth, the MCC Contract Administrator, the Contractor, the Contractor’s Representative and Other Contractors regarding ESD and WOL during the Subcontractor's Activities and the Subcontract Works; the training and awareness programmes provided to Subcontractor and subsubcontractor personnel regarding ESD and WOL; the procedure for preparing (including tailoring) and finalising the ESD and WOL Plan under clause 8.7; the procedure for regularly reviewing, updating and amending the ESD and WOL Plan under clause 8.7; the procedure for ensuring subsubcontractor compliance with the ESD and WOL Plan; the procedure for regularly auditing or other monitoring of Subcontractor and subsubcontractor compliance with the ESD and WOL Plan, including the procedures for recording, reporting, responding to and finalising: matters arising out of or in connection with such audits or other monitoring; and complaints regarding ESD and WOL during the Subcontractor's Activities and the Subcontract Works; the additional matters specified in the Subcontract Particulars; and any other matters required by the: Subcontract; or Contractor’s Representative. Means: efficient and effective use of natural resources in a way that maintains the ecological processes on which life depends; increased energy and water conservation and efficiency; sustainable development and use of renewable and alternative energy and water resources; reduction or elimination of toxic and harmful substances in facilities and their surrounding environments; improvements to interior and exterior environments leading to increased productivity and better health; efficiency in resource and materials utilisation, especially water resources; selection of materials and products based on their life-cycle environmental impacts; increased use of materials and products with recycled content; recycling of construction waste and building materials after demolition; reduction in harmful waste products produced during construction; use, operation and maintenance practices that reduce or minimise harmful effects on people and the natural environment; maintaining the cultural, economic, physical and social wellbeing of people and communities; the principles described in the Smart Infrastructure Handbook and the Sustainable Procurement Guide; and the additional principles specified in the Subcontract Particulars.

ESD and WOL Plan. The plan prepared by the Subcontractor Contractor and finalised under clause 8.79.2, which must set out in adequate detail all procedures the Subcontractor Contractor will implement to manage the SubcontractorContractor's Activities and the Subcontract Works from an ESD and WOL perspective to: ensure compliance with the Smart Infrastructure Handbook and Statutory Requirements; and xxxxxxxx the achievement of the ESD Principles and the WOL Objectives. The ESD and WOL Plan must not be inconsistent with the Contractor’s ESD and WOL Plan and must address, at a minimum: all matters in the Smart Infrastructure Handbook and the Sustainable Procurement GuideGuide (published by the Department of Agriculture, Water and the Environment); all Statutory Requirements; all ESD Principles and WOL Objectives; the roles and responsibilities of all Subcontractor Contractor and subsubcontractor subcontractor personnel (including the ESD and WOL Manager and the SubcontractorContractor's key people under clause 2.33.6(a)) regarding ESD and WOL; the procedure for consultation, cooperation and coordination of activities with the Commonwealth, the MCC Contract Administrator, the Contractor, the Contractor’s Representative Commonwealth and Other Contractors regarding ESD and WOL during the SubcontractorContractor's Activities and the Subcontract Works; the training and awareness programmes provided to Subcontractor Contractor and subsubcontractor subcontractor personnel regarding ESD and WOL; the procedure for preparing (including tailoring) and finalising the ESD and WOL Plan under clause 8.79.2; the procedure for regularly reviewing, updating and amending the ESD and WOL Plan under clause 8.79.2; the procedure for ensuring subsubcontractor subcontractor compliance with the ESD and WOL Plan; the procedure for regularly auditing or other monitoring of Subcontractor Contractor and subsubcontractor subcontractor compliance with the ESD and WOL Plan, including the procedures for recording, reporting, responding to and finalising: matters arising out of or in connection with such audits or other monitoring; and complaints regarding ESD and WOL during the SubcontractorContractor's Activities and the Subcontract Works; the additional matters specified in the Subcontract Contract Particulars; and any other matters required by the: SubcontractContract; or Contractor’s Representative. Means: efficient and effective use of natural resources in a way that maintains the ecological processes on which life depends; increased energy and water conservation and efficiency; sustainable development and use of renewable and alternative energy and water resources; reduction or elimination of toxic and harmful substances in facilities and their surrounding environments; improvements to interior and exterior environments leading to increased productivity and better health; efficiency in resource and materials utilisation, especially water resources; selection of materials and products based on their life-cycle environmental impacts; increased use of materials and products with recycled content; recycling of construction waste and building materials after demolition; reduction in harmful waste products produced during construction; use, operation and maintenance practices that reduce or minimise harmful effects on people and the natural environment; maintaining the cultural, economic, physical and social wellbeing of people and communities; the principles described in the Smart Infrastructure Handbook and the Sustainable Procurement Guide; and the additional principles specified in the Subcontract ParticularsContract Administrator.

ESD and WOL Plan. The plan prepared by the Subcontractor Consultant and finalised under clause 8.77.4, which must set out in adequate detail all procedures the Subcontractor Consultant will implement to manage the Subcontractor's Activities and the Subcontract Works Services from an ESD and WOL perspective to: ensure compliance with the Smart Infrastructure Handbook and Statutory Requirements; and xxxxxxxx the achievement of the ESD Principles and the WOL Objectives. The ESD and WOL Plan must not be inconsistent with the Contractor’s ESD and WOL Plan and must address, at a minimum: all matters in the Smart Infrastructure Handbook and the Sustainable Procurement Guide; all Statutory Requirements; all ESD Principles and WOL Objectives; the roles and responsibilities of all Subcontractor and subsubcontractor Consultant personnel (including the ESD and WOL Manager and the Subcontractor's Consultant’s key people under clause 2.34.4(a)(i)) regarding ESD and WOL; the procedure for consultation, cooperation and coordination of activities with the Commonwealth, the MCC Contract Administrator, the Contractor, the Contractor’s Representative and Other Contractors regarding ESD and WOL during the Subcontractor's Activities and the Subcontract WorksServices; the training and awareness programmes provided to Subcontractor and subsubcontractor Consultant personnel regarding ESD and WOL; the procedure for preparing (including tailoring) and finalising the ESD and WOL Plan to meet the requirements of the Subcontract under clause 8.77.4; the procedure for regularly reviewing, updating and amending the ESD and WOL Plan under clause 8.77.4; the procedure for ensuring subsubcontractor compliance with the ESD and WOL Plan; the procedure for regularly regular auditing or other monitoring of Subcontractor and subsubcontractor Consultant compliance with the ESD and WOL Plan, including the procedures for recording, reporting, responding to and finalising: matters arising out of or in connection with such audits or other monitoring; and complaints regarding ESD and WOL during the Subcontractor's Activities Services and the Subcontract MCC Works; the additional matters specified in the Subcontract Particulars; and any other matters required by the: Subcontract; or Contractor’s Representative. Means: efficient and effective use of natural resources in a way that maintains the ecological processes on which life depends; increased energy and water conservation and efficiency; sustainable development and use of renewable and alternative energy and water resources; reduction or elimination of toxic and harmful substances in facilities and their surrounding environments; improvements to interior and exterior environments leading to increased productivity and better health; efficiency in resource and materials utilisation, especially water resources; selection of materials and products based on their life-cycle environmental impacts; increased use of materials and products with recycled content; recycling of construction waste and building materials after demolition; reduction in harmful waste products produced during construction; use, operation and maintenance practices that reduce or minimise harmful effects on people and the natural environment; maintaining the cultural, economic, physical and social wellbeing of people and communities; the principles described in the Smart Infrastructure Handbook and the Sustainable Procurement GuideHandbook; and the additional principles specified in the Subcontract Particulars.

ESD and WOL Plan. The plan prepared by the Subcontractor Contractor and finalised under clause 8.79.2, which must set out in adequate detail all procedures the Subcontractor Contractor will implement to manage the SubcontractorContractor's Activities and the Subcontract Works from an ESD and WOL perspective to: ensure compliance with the Smart Infrastructure Handbook and Statutory Requirements; and xxxxxxxx the achievement of the ESD Principles and the WOL Objectives. The ESD and WOL Plan must not be inconsistent with the Contractor’s ESD and WOL Plan and must address, at a minimum: all matters in the Smart Infrastructure Handbook and the Sustainable Procurement Guide; all Statutory Requirements; all ESD Principles and WOL Objectives; the roles and responsibilities of all Subcontractor Contractor and subsubcontractor subcontractor personnel (including the ESD and WOL Manager and the SubcontractorContractor's key people under clause 2.33.6(a)) regarding ESD and WOL; the procedure for consultation, cooperation and coordination of activities with the Commonwealth, the MCC Contract Administrator, the Contractor, the Contractor’s Representative Commonwealth and Other Contractors regarding ESD and WOL during the SubcontractorContractor's Activities and the Subcontract Works; the training and awareness programmes provided to Subcontractor Contractor and subsubcontractor subcontractor personnel regarding ESD and WOL; the procedure for preparing (including tailoring) and finalising the ESD and WOL Plan under clause 8.79.2; the procedure for regularly reviewing, updating and amending the ESD and WOL Plan under clause 8.79.2; the procedure for ensuring subsubcontractor subcontractor compliance with the ESD and WOL Plan; the procedure for regularly auditing or other monitoring of Subcontractor Contractor and subsubcontractor subcontractor compliance with the ESD and WOL Plan, including the procedures for recording, reporting, responding to and finalising: matters arising out of or in connection with such audits or other monitoring; and complaints regarding ESD and WOL during the SubcontractorContractor's Activities and the Subcontract Works; the additional matters specified in the Subcontract Contract Particulars; and any other matters required by the: SubcontractContract; or Contractor’s Representative. Means: efficient and effective use of natural resources in a way that maintains the ecological processes on which life depends; increased energy and water conservation and efficiency; sustainable development and use of renewable and alternative energy and water resources; reduction or elimination of toxic and harmful substances in facilities and their surrounding environments; improvements to interior and exterior environments leading to increased productivity and better health; efficiency in resource and materials utilisation, especially water resources; selection of materials and products based on their life-cycle environmental impacts; increased use of materials and products with recycled content; recycling of construction waste and building materials after demolition; reduction in harmful waste products produced during construction; use, operation and maintenance practices that reduce or minimise harmful effects on people and the natural environment; maintaining the cultural, economic, physical and social wellbeing of people and communities; the principles described in the Smart Infrastructure Handbook and the Sustainable Procurement Guide; and the additional principles specified in the Subcontract ParticularsContract Administrator.

ESD and WOL Plan. The plan prepared by the Subcontractor and finalised under clause 8.79.2, which must set out in adequate detail all procedures the Subcontractor will implement to manage the Subcontractor's ’s Activities and the Subcontract Works from an ESD and WOL perspective to: ensure compliance with the Smart Infrastructure Handbook and Statutory Requirements; and xxxxxxxx the achievement of the ESD Principles and the WOL Objectives. The ESD and WOL Plan must not be inconsistent with the Contractor’s ESD and WOL Plan and must address, at a minimum: all matters in the Smart Infrastructure Handbook and the Sustainable Procurement Guide; all Statutory Requirements; all ESD Principles and WOL Objectives; the roles and responsibilities of all Subcontractor and subsubcontractor personnel (including the ESD and WOL Manager and the Subcontractor's ’s key people under clause 2.33.6(a)) regarding ESD and WOL; the procedure for consultation, cooperation and coordination of activities with the Commonwealth, the MCC Contract Administrator, the Contractor, the Contractor’s Representative and Other Contractors regarding ESD and WOL during the Subcontractor's ’s Activities and the Subcontract Works; the training and awareness programmes provided to Subcontractor and subsubcontractor personnel regarding ESD and WOL; the procedure for preparing (including tailoring) and finalising the ESD and WOL Plan under clause 8.79.2; the procedure for regularly reviewing, updating and amending the ESD and WOL Plan under clause 8.79.2; the procedure for ensuring subsubcontractor compliance with the ESD and WOL Plan; the procedure for regularly auditing or other monitoring of Subcontractor and subsubcontractor compliance with the ESD and WOL Plan, including the procedures for recording, reporting, responding to and finalising: matters arising out of or in connection with such audits or other monitoring; and complaints regarding ESD and WOL during the Subcontractor's ’s Activities and the Subcontract Works; the additional matters specified in the Subcontract Particulars; and any other matters required by the: Subcontract; or Contractor’s Representative. Means: efficient and effective use of natural resources in a way that maintains the ecological processes on which life depends; increased energy and water conservation and efficiency; sustainable development and use of renewable and alternative energy and water resources; reduction or elimination of toxic and harmful substances in facilities and their surrounding environments; improvements to interior and exterior environments leading to increased productivity and better health; efficiency in resource and materials utilisation, especially water resources; selection of materials and products based on their life-cycle environmental impacts; increased use of materials and products with recycled content; recycling of construction waste and building materials after demolition; reduction in harmful waste products produced during construction; use, operation and maintenance practices that reduce or minimise harmful effects on people and the natural environment; maintaining the cultural, economic, physical and social wellbeing of people and communities; the principles described in the Smart Infrastructure Handbook and the Sustainable Procurement Guide; and the additional principles specified in the Subcontract Particulars.

ESD and WOL Plan. The plan prepared by the Subcontractor Contractor and finalised under clause 8.7, which must set out in adequate detail all procedures the Subcontractor Contractor will implement to manage the SubcontractorContractor's Activities and the Subcontract Works from an ESD and WOL perspective to: ensure compliance with the Smart Infrastructure Handbook Handbook, the ESD and WOL Plan Guide and Statutory Requirements; and xxxxxxxx the achievement of the ESD Principles and the WOL Objectives. The ESD and WOL Plan must not be inconsistent with the Contractor’s ESD and WOL Plan and (if any) must address, at a minimum: all matters in the Smart Infrastructure Handbook Handbook; all matters in the ESD and the Sustainable Procurement WOL Plan Guide; all Statutory Requirements; all ESD Principles and WOL Objectives; the roles and responsibilities of all Subcontractor Contractor and subsubcontractor subcontractor personnel (including the ESD and WOL Manager and the SubcontractorContractor's key people under clause 2.3) regarding ESD and WOL; the procedure for consultation, cooperation and coordination of activities with the Commonwealth, the MCC Contract Administrator, the PDS Contractor, the Contractor’s Representative Commonwealth and Other Contractors regarding ESD and WOL during the SubcontractorContractor's Activities and the Subcontract Works; the training and awareness programmes provided to Subcontractor Contractor and subsubcontractor subcontractor personnel regarding ESD and WOL; the procedure for preparing (including tailoring) and finalising the ESD and WOL Plan (if any) under clause 8.7; the procedure for regularly reviewing, updating and amending the ESD and WOL Plan (if any) under clause 8.7; the procedure for ensuring subsubcontractor subcontractor compliance with the ESD and WOL PlanPlan (if any); the procedure for regularly auditing or other monitoring of Subcontractor Contractor and subsubcontractor subcontractor compliance with the ESD and WOL PlanPlan (if any), including the procedures for recording, reporting, responding to and finalising: matters arising out of or in connection with such audits or other monitoring; and complaints regarding ESD and WOL during the SubcontractorContractor's Activities and the Subcontract Works; the additional matters specified in the Subcontract Contract Particulars; and any other matters required by theby: Subcontractthe Contract; or the PDS Contractor’s Representative. Means: efficient and effective use of natural resources in a way that maintains the ecological processes on which life depends; increased energy and water conservation and efficiency; sustainable development and use of renewable and alternative energy and water resources; reduction or elimination of toxic and harmful substances in facilities and their surrounding environments; improvements to interior and exterior environments leading to increased productivity and better health; efficiency in resource and materials utilisation, especially water resources; selection of materials and products based on their life-cycle environmental impacts; increased use of materials and products with recycled content; recycling of construction waste and building materials after demolition; reduction in harmful waste products produced during construction; use, operation and maintenance practices that reduce or minimise harmful effects on people and the natural environment; maintaining the cultural, economic, physical and social wellbeing of people and communities; the principles described in the Smart Infrastructure Handbook and the Sustainable Procurement Guide; and the additional principles specified in the Subcontract Particulars.

ESD and WOL Plan. The plan prepared by the Subcontractor Consultant and finalised under clause 8.77.4, which must set out in adequate detail all procedures the Subcontractor Consultant will implement to manage the Subcontractor's Activities and the Subcontract Works Services from an ESD and WOL perspective to: ensure compliance with the Smart Infrastructure Handbook and Statutory Requirements; and xxxxxxxx the achievement of the ESD Principles and the WOL Objectives. The ESD and WOL Plan must not be inconsistent with the Contractor’s ESD and WOL Plan and must address, at a minimum: all matters in the Smart Infrastructure Handbook and the Sustainable Procurement Guide; all Statutory Requirements; all ESD Principles and WOL Objectives; the roles and responsibilities of all Subcontractor and subsubcontractor Consultant personnel (including the ESD and WOL Manager and the Subcontractor's Consultant’s key people under clause 2.34.4(a)(i)) regarding ESD and WOL; the procedure for consultation, cooperation and coordination of activities with the Commonwealth, the MCC Contract Administrator, the Contractor, the Contractor’s Representative and Other Contractors regarding ESD and WOL during the Subcontractor's Activities and the Subcontract WorksServices; the training and awareness programmes provided to Subcontractor and subsubcontractor Consultant personnel regarding ESD and WOL; the procedure for preparing (including tailoring) and finalising the ESD and WOL Plan to meet the requirements of the Subcontract under clause 8.77.4; the procedure for regularly reviewing, updating and amending the ESD and WOL Plan under clause 8.77.4; the procedure for ensuring subsubcontractor compliance with the ESD and WOL Plan; the procedure for regularly regular auditing or other monitoring of Subcontractor and subsubcontractor Consultant compliance with the ESD and WOL Plan, including the procedures for recording, reporting, responding to and finalising: matters arising out of or in connection with such audits or other monitoring; and complaints regarding ESD and WOL during the Subcontractor's Activities Services and the Subcontract MCC Works; the additional matters specified in the Subcontract Particulars; and any other matters required by the: Subcontract; or Contractor’s Representative. Means: efficient and effective use of natural resources in a way that maintains the ecological processes on which life depends; increased energy and water conservation and efficiency; sustainable development and use of renewable and alternative energy and water resources; reduction or elimination of toxic and harmful substances in facilities and their surrounding environments; improvements to interior and exterior environments leading to increased productivity and better health; efficiency in resource and materials utilisation, especially water resources; selection of materials and products based on their life-cycle environmental impacts; increased use of materials and products with recycled content; recycling of construction waste and building materials after demolition; reduction in harmful waste products produced during construction; use, operation and maintenance practices that reduce or minimise harmful effects on people and the natural environment; maintaining the cultural, economic, physical and social wellbeing of people and communities; the principles described in the Smart Infrastructure Handbook and the Sustainable Procurement Guide; and the additional principles specified in the Subcontract Particulars.

ESD and WOL Plan. The plan prepared by the Subcontractor Contractor and finalised under clause 8.79.2, which must set out in adequate detail all procedures the Subcontractor Contractor will implement to manage the SubcontractorContractor's Activities and the Subcontract Works from an ESD and WOL perspective to: ensure compliance with the Smart Infrastructure Handbook Handbook, the ESD and WOL Plan Guide and Statutory Requirements; and xxxxxxxx the achievement of the ESD Principles and the WOL Objectives. The ESD and WOL Plan must not be inconsistent with the Contractor’s ESD and WOL Plan and must address, at a minimum: all matters in the Smart Infrastructure Handbook Handbook; all matters in the ESD and the Sustainable Procurement WOL Plan Guide; all Statutory Requirements; all ESD Principles and WOL Objectives; the roles and responsibilities of all Subcontractor Contractor and subsubcontractor subcontractor personnel (including the ESD and WOL Manager and the SubcontractorContractor's key people under clause 2.33.6(a)) regarding ESD and WOL; the procedure for consultation, cooperation and coordination of activities with the Commonwealth, the MCC Contract Administrator, the Contractor, the Contractor’s Representative Commonwealth and Other Contractors regarding ESD and WOL during the SubcontractorContractor's Activities and the Subcontract Works; the training and awareness programmes provided to Subcontractor Contractor and subsubcontractor subcontractor personnel regarding ESD and WOL; the procedure for preparing (including tailoring) and finalising the ESD and WOL Plan under clause 8.79.2; the procedure for regularly reviewing, updating and amending the ESD and WOL Plan under clause 8.79.2; the procedure for ensuring subsubcontractor subcontractor compliance with the ESD and WOL Plan; the procedure for regularly auditing or other monitoring of Subcontractor Contractor and subsubcontractor subcontractor compliance with the ESD and WOL Plan, including the procedures for recording, reporting, responding to and finalising: matters arising out of or in connection with such audits or other monitoring; and complaints regarding ESD and WOL during the SubcontractorContractor's Activities and the Subcontract Works; the additional matters specified in the Subcontract Contract Particulars; and any other matters required by theby: Subcontractthe Contract; or Contractor’s Representative. Means: efficient and effective use of natural resources in a way that maintains the ecological processes on which life depends; increased energy and water conservation and efficiency; sustainable development and use of renewable and alternative energy and water resources; reduction or elimination of toxic and harmful substances in facilities and their surrounding environments; improvements to interior and exterior environments leading to increased productivity and better health; efficiency in resource and materials utilisation, especially water resources; selection of materials and products based on their life-cycle environmental impacts; increased use of materials and products with recycled content; recycling of construction waste and building materials after demolition; reduction in harmful waste products produced during construction; use, operation and maintenance practices that reduce or minimise harmful effects on people and the natural environment; maintaining the cultural, economic, physical and social wellbeing of people and communities; the principles described in the Smart Infrastructure Handbook and the Sustainable Procurement Guide; and the additional principles specified in the Subcontract ParticularsContract Administrator.

ESD and WOL Plan. The plan prepared by the Subcontractor Contractor and finalised under clause 8.7, which must set out in adequate detail all procedures the Subcontractor Contractor will implement to manage the SubcontractorContractor's Activities and the Subcontract Works from an ESD and WOL perspective to: ensure compliance with the Smart Infrastructure Handbook Handbook, the ESD and WOL Plan Guide and Statutory Requirements; and xxxxxxxx the achievement of the ESD Principles and the WOL Objectives. The ESD and WOL Plan must not be inconsistent with the Contractor’s ESD and WOL Plan and (if any) must address, at a minimum: all matters in the Smart Infrastructure Handbook Handbook; all matters in the ESD and the Sustainable Procurement WOL Plan Guide; all Statutory Requirements; all ESD Principles and WOL Objectives; the roles and responsibilities of all Subcontractor Contractor and subsubcontractor subcontractor personnel (including the ESD and WOL Manager and the SubcontractorContractor's key people under clause 2.3) regarding ESD and WOL; the procedure for consultation, cooperation and coordination of activities with the Commonwealth, the MCC Contract Administrator, the PDS Contractor, the Contractor’s Representative Commonwealth and Other Contractors regarding ESD and WOL during the SubcontractorContractor's Activities and the Subcontract Works; the training and awareness programmes provided to Subcontractor Contractor and subsubcontractor subcontractor personnel regarding ESD and WOL; the procedure for preparing (including tailoring) and finalising the ESD and WOL Plan (if any) under clause 8.7; the procedure for regularly reviewing, updating and amending the ESD and WOL Plan (if any) under clause 8.7; the procedure for ensuring subsubcontractor subcontractor compliance with the ESD and WOL PlanPlan (if any); the procedure for regularly auditing or other monitoring of Subcontractor Contractor and subsubcontractor subcontractor compliance with the ESD and WOL PlanPlan (if any), including the procedures for recording, reporting, responding to and finalising: matters arising out of or in connection with such audits or other monitoring; and complaints regarding ESD and WOL during the SubcontractorContractor's Activities and the Subcontract Works; the additional matters specified in the Subcontract Contract Particulars; and any other matters required by theby: Subcontractthe Contract; or the PDS Contractor’s Representative. Means: efficient The ESD and effective use of natural resources in a way that maintains WOL Plan Guide available on DEQMS (or any alternative location notified by the ecological processes on which life depends; increased energy and water conservation and efficiency; sustainable development and use of renewable and alternative energy and water resources; reduction or elimination of toxic and harmful substances in facilities and their surrounding environments; improvements Commonwealth), as amended from time to interior and exterior environments leading to increased productivity and better health; efficiency in resource and materials utilisation, especially water resources; selection of materials and products based on their life-cycle environmental impacts; increased use of materials and products with recycled content; recycling of construction waste and building materials after demolition; reduction in harmful waste products produced during construction; use, operation and maintenance practices that reduce or minimise harmful effects on people and time by the natural environment; maintaining the cultural, economic, physical and social wellbeing of people and communities; the principles described in the Smart Infrastructure Handbook and the Sustainable Procurement Guide; and the additional principles specified in the Subcontract ParticularsCommonwealth.

ESD and WOL Plan. The plan prepared by the Subcontractor Consultant and finalised under clause 8.77.4, which must set out in adequate detail all procedures the Subcontractor Consultant will implement to manage the Subcontractor's Activities and the Subcontract Works Services from an ESD and WOL perspective to: ensure compliance with the Smart Infrastructure Handbook and Statutory Requirements; and xxxxxxxx the achievement of the ESD Principles and the WOL Objectives. The ESD and WOL Plan must not be inconsistent with the Contractor’s ESD and WOL Plan and must address, at a minimum: all matters in the Smart Infrastructure Handbook and the Sustainable Procurement Guide; all Statutory Requirements; all ESD Principles and WOL Objectives; the roles and responsibilities of all Subcontractor Consultant and subsubcontractor subconsultant personnel (including the ESD and WOL Manager and the SubcontractorConsultant's key people under clause 2.34.5(a)(i)) regarding ESD and WOL; the procedure for consultation, cooperation and coordination of activities with the Commonwealth, the MCC Contract Administrator, the Contractor, the Contractor’s Representative Commonwealth and Other Contractors regarding ESD and WOL during the Subcontractor's Activities and the Subcontract WorksServices; the training and awareness programmes provided to Subcontractor Consultant and subsubcontractor subconsultant personnel regarding ESD and WOL; the procedure for preparing (including tailoring) and finalising the ESD and WOL Plan to meet the requirements of the Contract under clause 8.77.4; the procedure for regularly reviewing, updating and amending the ESD and WOL Plan under clause 8.77.4; the procedure for ensuring subsubcontractor subconsultant compliance with the ESD and WOL Plan; the procedure for regularly regular auditing or other monitoring of Subcontractor Consultant and subsubcontractor subconsultant compliance with the ESD and WOL Plan, including the procedures for recording, reporting, responding to and finalising: matters arising out of or in connection with such audits or other monitoring; and complaints regarding ESD and WOL during the Subcontractor's Activities Services and the Subcontract Works; the additional matters specified in the Subcontract Contract Particulars; and any other matters required by the: SubcontractContract; or Contractor’s Representative. Means: efficient and effective use of natural resources in a way that maintains the ecological processes on which life depends; increased energy and water conservation and efficiency; sustainable development and use of renewable and alternative energy and water resources; reduction or elimination of toxic and harmful substances in facilities and their surrounding environments; improvements to interior and exterior environments leading to increased productivity and better health; efficiency in resource and materials utilisation, especially water resources; selection of materials and products based on their life-cycle environmental impacts; increased use of materials and products with recycled content; recycling of construction waste and building materials after demolition; reduction in harmful waste products produced during construction; use, operation and maintenance practices that reduce or minimise harmful effects on people and the natural environment; maintaining the cultural, economic, physical and social wellbeing of people and communities; the principles described in the Smart Infrastructure Handbook and the Sustainable Procurement Guide; and the additional principles specified in the Subcontract ParticularsContract Administrator.

ESD and WOL Plan. The plan prepared by the Subcontractor and finalised under clause 8.7, which must set out in adequate detail all procedures the Subcontractor will implement to manage the Subcontractor's Activities and the Subcontract Works from an ESD and WOL perspective to: ensure compliance with the Smart Infrastructure Handbook Manual, the ESD and WOL Plan Guide and Statutory Requirements; and xxxxxxxx the achievement of the ESD Principles and the WOL Objectives. The ESD and WOL Plan must not be inconsistent with the Contractor’s ESD and WOL Plan and must address, at a minimum: all matters in the Smart Infrastructure Handbook Manual; all matters in the ESD and the Sustainable Procurement WOL Plan Guide; all Statutory Requirements; all ESD Principles and WOL Objectives; the roles and responsibilities of all Subcontractor and subsubcontractor personnel (including the ESD and WOL Manager and the Subcontractor's key people under clause 2.3) regarding ESD and WOL; the procedure for consultation, cooperation and coordination of activities with the Commonwealth, the MCC Contract Administrator, the Contractor, the Contractor’s Representative and Other Contractors regarding ESD and WOL during the Subcontractor's Activities and the Subcontract Works; the training and awareness programmes provided to Subcontractor and subsubcontractor personnel regarding ESD and WOL; the procedure for preparing (including tailoring) and finalising the ESD and WOL Plan under clause 8.7; the procedure for regularly reviewing, updating and amending the ESD and WOL Plan under clause 8.7; the procedure for ensuring subsubcontractor compliance with the ESD and WOL Plan; the procedure for regularly auditing or other monitoring of Subcontractor and subsubcontractor compliance with the ESD and WOL Plan, including the procedures for recording, reporting, responding to and finalising: matters arising out of or in connection with such audits or other monitoring; and complaints regarding ESD and WOL during the Subcontractor's Activities and the Subcontract Works; the additional matters specified in the Subcontract Particulars; and any other matters required by theby: the Subcontract; or the Contractor’s Representative. The ESD and WOL Plan Guide available on DEQMS (or any alternative location notified by the Commonwealth), as amended from time to time by the Commonwealth. Means: efficient and effective use of natural resources in a way that maintains the ecological processes on which life depends; increased energy and water conservation and efficiency; sustainable development and use of renewable and alternative energy and water resources; reduction or elimination of toxic and harmful substances in facilities and their surrounding environments; improvements to interior and exterior environments leading to increased productivity and better health; efficiency in resource and materials utilisation, especially water resources; selection of materials and products based on their life-cycle environmental impacts; increased use of materials and products with recycled content; recycling of construction waste and building materials after demolition; reduction in harmful waste products produced during construction; use, operation and maintenance practices that reduce or minimise harmful effects on people and the natural environment; maintaining the cultural, economic, physical and social wellbeing of people and communities; the principles described in the Smart Infrastructure Handbook and the Sustainable Procurement GuideManual; and the additional principles specified in the Subcontract Particulars. A spreadsheet based tool for recording Defence Estate Data for each element on the Defence Estate in accordance with the ERIM, available on DEQMS. The unique identifier for each element on the Defence Estate used in the XXXX. The Project Documents described in Annexure 1. A spreadsheet based tool for recording forecast maintenance for each element on the Defence Estate, available on DEQMS. An initial, incomplete record used in the XXXX for recording Defence Estate Data for each element on the Defence Estate, comprising minimum populated classifications, attributes and formats. Has the same meaning as in subsection 3(1) of the Building Code 2016.

ESD and WOL Plan. The plan prepared by the Subcontractor Contractor and finalised under clause 8.7, which must set out in adequate detail all procedures the Subcontractor Contractor will implement to manage the SubcontractorContractor's Activities and the Subcontract Works from an ESD and WOL perspective to: ensure compliance with the Smart Infrastructure Handbook and Statutory Requirements; and xxxxxxxx the achievement of the ESD Principles and the WOL Objectives. The ESD and WOL Plan must not be inconsistent with the Contractor’s ESD and WOL Plan and must address, at a minimum: all matters in the Smart Infrastructure Handbook and the Sustainable Procurement GuideGuide (published by the Department of Agriculture, Water and the Environment); all Statutory Requirements; all ESD Principles and WOL Objectives; the roles and responsibilities of all Subcontractor Contractor and subsubcontractor subcontractor personnel (including the ESD and WOL Manager and the SubcontractorContractor's key people under clause 2.3) regarding ESD and WOL; the procedure for consultation, cooperation and coordination of activities with the Commonwealth, the MCC Contract Administrator, the Contractor, the Contractor’s Representative Commonwealth and Other Contractors regarding ESD and WOL during the SubcontractorContractor's Activities and the Subcontract Works; the training and awareness programmes provided to Subcontractor Contractor and subsubcontractor subcontractor personnel regarding ESD and WOL; the procedure for preparing (including tailoring) and finalising the ESD and WOL Plan under clause 8.7; the procedure for regularly reviewing, updating and amending the ESD and WOL Plan under clause 8.7; the procedure for ensuring subsubcontractor subcontractor compliance with the ESD and WOL Plan; the procedure for regularly auditing or other monitoring of Subcontractor Contractor and subsubcontractor subcontractor compliance with the ESD and WOL Plan, including the procedures for recording, reporting, responding to and finalising: matters arising out of or in connection with such audits or other monitoring; and complaints regarding ESD and WOL during the SubcontractorContractor's Activities and the Subcontract Works; the additional matters specified in the Subcontract Contract Particulars; and any other matters required by the: SubcontractContract; or Contractor’s Representative. Means: efficient and effective use of natural resources in a way that maintains the ecological processes on which life depends; increased energy and water conservation and efficiency; sustainable development and use of renewable and alternative energy and water resources; reduction or elimination of toxic and harmful substances in facilities and their surrounding environments; improvements to interior and exterior environments leading to increased productivity and better health; efficiency in resource and materials utilisation, especially water resources; selection of materials and products based on their life-cycle environmental impacts; increased use of materials and products with recycled content; recycling of construction waste and building materials after demolition; reduction in harmful waste products produced during construction; use, operation and maintenance practices that reduce or minimise harmful effects on people and the natural environment; maintaining the cultural, economic, physical and social wellbeing of people and communities; the principles described in the Smart Infrastructure Handbook and the Sustainable Procurement Guide; and the additional principles specified in the Subcontract ParticularsContract Administrator.

ESD and WOL Plan. The plan prepared by the Subcontractor Contractor and finalised under clause 8.7, which must set out in adequate detail all procedures the Subcontractor Contractor will implement to manage the SubcontractorContractor's Activities and the Subcontract Works from an ESD and WOL perspective to: ensure compliance with the Smart Infrastructure Handbook and Statutory Requirements; and xxxxxxxx the achievement of the ESD Principles and the WOL Objectives. The ESD and WOL Plan must not be inconsistent with the Contractor’s ESD and WOL Plan and must address, at a minimum: all matters in the Smart Infrastructure Handbook and the Sustainable Procurement Guide; all Statutory Requirements; all ESD Principles and WOL Objectives; the roles and responsibilities of all Subcontractor Contractor and subsubcontractor subcontractor personnel (including the ESD and WOL Manager and the SubcontractorContractor's key people under clause 2.3) regarding ESD and WOL; the procedure for consultation, cooperation and coordination of activities with the Commonwealth, the MCC Contract Administrator, the Contractor, the Contractor’s Representative Commonwealth and Other Contractors regarding ESD and WOL during the SubcontractorContractor's Activities and the Subcontract Works; the training and awareness programmes provided to Subcontractor Contractor and subsubcontractor subcontractor personnel regarding ESD and WOL; the procedure for preparing (including tailoring) and finalising the ESD and WOL Plan under clause 8.7; the procedure for regularly reviewing, updating and amending the ESD and WOL Plan under clause 8.7; the procedure for ensuring subsubcontractor subcontractor compliance with the ESD and WOL Plan; the procedure for regularly auditing or other monitoring of Subcontractor Contractor and subsubcontractor subcontractor compliance with the ESD and WOL Plan, including the procedures for recording, reporting, responding to and finalising: matters arising out of or in connection with such audits or other monitoring; and complaints regarding ESD and WOL during the SubcontractorContractor's Activities and the Subcontract Works; the additional matters specified in the Subcontract Contract Particulars; and any other matters required by the: SubcontractContract; or Contractor’s Representative. Means: efficient and effective use of natural resources in a way that maintains the ecological processes on which life depends; increased energy and water conservation and efficiency; sustainable development and use of renewable and alternative energy and water resources; reduction or elimination of toxic and harmful substances in facilities and their surrounding environments; improvements to interior and exterior environments leading to increased productivity and better health; efficiency in resource and materials utilisation, especially water resources; selection of materials and products based on their life-cycle environmental impacts; increased use of materials and products with recycled content; recycling of construction waste and building materials after demolition; reduction in harmful waste products produced during construction; use, operation and maintenance practices that reduce or minimise harmful effects on people and the natural environment; maintaining the cultural, economic, physical and social wellbeing of people and communities; the principles described in the Smart Infrastructure Handbook and the Sustainable Procurement Guide; and the additional principles specified in the Subcontract ParticularsContract Administrator.