Ethane Rejection Sample Clauses

Ethane Rejection. Customer will have the right to reject ethane each Month by providing Eagle Ford with five (5) Business Days’ notice prior to the first Day of such month. Customer’s ethane recovery for any Month during which Customer has elected to reject ethane will be fixed at [*****]% of the theoretical gallons of ethane contained in Customer’s Gas. All other fixed recoveries as set forth in Section 6.2 will remain the same during ethane rejection.
AutoNDA by SimpleDocs
Ethane Rejection. At least six (6) business days before the first of each month, Seller shall notify Buyer of its election to be paid for NGLs based on either the Ethane Recovery Option or the Ethane Rejection Option as follows: Ethane Recovery Ethane 80% Propane 95% Iso & Normal Butanes 97% Pentanes and Heavier 97% Ethane Rejection Ethane [****]% Propane [****]% Iso & Normal Butanes [****]% Pentanes and Heavier [****]% If Buyer fails to timely notify Seller of its election, then the fixed Ethane Recovery or Ethane Rejection percentages shall continue from the prior month. Notwithstanding the foregoing in this Section 3, Seller shall make no election for the months of May 2019, June 2019, and July 2019, but instead the Ethane Recovery Option shall apply to each of those three months.
Ethane Rejection. Whenever Buyer is operating its facilities in less than full ethane recovery mode and actual ethane recovery is less than 80%, the ethane fixed recovery percentage in Subsection 5.6(c) will not apply, and Buyer will then base Seller’s allocable gallons of only ethane on Seller’s pro rata share of any actual ethane recoveries. Buyer will operate in full ethane recovery mode or will pay Seller as if it is operating in full ethane recovery mode unless the prevailing market conditions make the sale of Residue Gas more attractive than the full recovery of ethane.

Related to Ethane Rejection

  • Rejection State Street reserves the right to decline to process or delay the processing of a payment order which (a) is in excess of the collected balance in the account to be charged at the time of State Street's receipt of such payment order; (b) if initiating such payment order would cause State Street, in State Street's sole judgment, to exceed any volume, aggregate dollar, network, time, credit or similar limits upon wire transfers which are applicable to State Street; or (c) if State Street, in good faith, is unable to satisfy itself that the transaction has been properly authorized.

  • Acceptance; Rejection A holder of Notes may accept the offer to prepay made pursuant to this Section 8.3 by causing a notice of such acceptance to be delivered to the Company not later than 15 days after receipt by such holder of the most recent offer of prepayment. A failure by a holder of Notes to respond to an offer to prepay made pursuant to this Section 8.3 shall be deemed to constitute a rejection of such offer by such holder.

  • Acceptance and Rejection Jubilant shall be entitled to reject any shipment of Products that fails to conform to the Product Specifications or Packaging Specifications at the time of delivery to Jubilant. Jubilant shall notify Cadista of such rejection within thirty (30) days after delivery of such Products shipment to Jubilant, and shall set forth in such notification the basis under this Agreement for such rejection, including any testing or inspection results, provided, however, that in the event any such non-conformity is latent or was not obvious and could not be readily discovered from a physical inspection of the Products shipment, Jubilant may give written notice to Cadista of its rejection of such shipment within thirty (30) days after Jubilant's discovery of such non-conformance. Failure to so notify Cadista, or failure to identify the basis under this Agreement for rejection of any Product, shall constitute acceptance of such Product, except to the extent the Product fails to conform to the Product Specifications or Packaging Specifications as the case may be. After such failure to notify, Jubilant shall be obligated to make payment for such Product in accordance with pricing provisions of this Agreement. If the parties disagree as to whether any Product meets the Product Specifications or Packaging Specifications and the parties are unable to negotiate a commercially reasonable resolution, then samples and/or batch records, as appropriate, from the disputed shipment shall promptly be submitted for testing and evaluation to an independent Third Party as shall be agreed to in writing by both parties. The determination of such Third Party as to whether the disputed Product shipment meets the Product Specifications or Packaging Specifications shall be final and binding. The cost of the testing and evaluation by the independent third party shall be borne by the party whose position is found to be erroneous. If, pursuant to this Section 3.2, any Products are found not to conform to the Product Specifications or Packaging Specifications, as a result of a cause occurring prior to placement thereof with the carrier (and not arising as a result of the Materials being defective or failing to meet their respective specifications), at Cadista’s option, Jubilant shall either (i) deliver such non-conforming Products to Cadista or (ii) destroy such non-conforming Products in accordance with applicable laws, rules and regulations. Cadista shall reimburse Jubilant for all reasonable costs and expenses in connection such delivery or destruction, and, at Cadista’s option and as Jubilant’s exclusive remedy, Cadista shall either: (i) credit Jubilant for the amount paid or payable by Jubilant to Cadista for such rejected Product shipment (and reimburse Jubilant for the Material of such rejected batch at Jubilant’s cost for such Materials), or (ii) replace such rejected Product shipment (with Cadista paying Jubilant for all Materials or such replacement shipment in an amount equal to Jubilant’s cost), at no additional cost to Jubilant, as promptly as reasonably practicable, but in no event later than forty-five (45) days from receipt of notice of non-conformity of such shipment from Jubilant. Jubilant shall notify Cadista in writing of any claim relating to quantitative deficiencies in any shipment of Product that Jubilant considers to have been caused prior to shipment hereunder within thirty (30) days following receipt of any such shipment. Any claim for a quantitative deficiency which is not made within such thirty (30) days shall be deemed to have been waived by Jubilant and Jubilant shall be obligated to make payment for such Product in accordance with Section 5 of this Agreement. In the event Jubilant determines there is a quantitative deficiency from the applicable shipping documentation, the parties shall investigate such deficiency and, if the parties agree that such deficiency occurred prior to shipment, Cadista shall, at Jubilant’s option and as Jubilant’s exclusive remedy for such quantitative deficiency, (a) credit Jubilant for the amount paid by Jubilant to Cadista in excess of the aggregate price for actual quantities shipped; or (b) subject to Cadista having Product on hand at the time of request by Jubilant, rectify any such deficiency by promptly shipping the appropriate quantities of any relevant Product to Jubilant, but in no event later than fifteen (15) calendar days following the occurrence of such a deficiency, in which case Jubilant shall be obligated to pay for any such quantities pursuant to Section 5 of this Agreement.

  • Rejection Right The Borrower shall notify the Administrative Agent in writing of any mandatory prepayment of Term Loans required to be made pursuant to Section 5.2(a) at least three Business Days prior to the date of such prepayment. Each such notice shall specify the date of such prepayment and provide a reasonably detailed calculation of the amount of such prepayment. The Administrative Agent will promptly notify each Lender holding Term Loans of the contents of the Borrower’s prepayment notice and of such Lender’s pro rata share of the prepayment. Each Term Loan Lender may reject all (but not less than all) of its pro rata share of any mandatory prepayment (such declined amounts, the “Declined Proceeds”) of Term Loans required to be made pursuant to Section 5.2(a) by providing written notice (each, a “Rejection Notice”) to the Administrative Agent and the Borrower no later than 5:00 p.m. (New York time) one Business Day after the date of such Lender’s receipt of notice from the Administrative Agent regarding such prepayment. If a Lender fails to deliver a Rejection Notice to the Administrative Agent within the time frame specified above or such Rejection Notice fails to specify the principal amount of the Term Loans to be rejected, any such failure will be deemed an acceptance of the total amount of such mandatory prepayment of Term Loans. Any Declined Proceeds remaining thereafter shall be retained by the Borrower (“Retained Declined Proceeds”); provided that in the case of any mandatory repayment of Term Loans required to be made pursuant to Section 5.2(a)(iii), any Declined Proceeds shall be reallocated and paid to the Term Loan Lenders that have not rejected such mandatory prepayment on a pro rata basis and shall not constitute Retained Declined Proceeds.

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • Notice of Certain Proposed Actions Having Environmental Impact Prompt written notice describing in reasonable detail (A) any proposed acquisition of stock, assets, or property by such Principal Company or any of its Subsidiaries that could reasonably be expected to (1) expose such Principal Company or any of its Subsidiaries to, or result in, Environmental Claims that could reasonably be expected to result in, individually or in the aggregate, a Material Adverse Effect or (2) affect the ability of such Principal Company or any of its Subsidiaries to maintain in full force and effect all material Governmental Authorizations required under any Environmental Laws for their respective operations and (B) any proposed action to be taken by such Principal Company or any of its Subsidiaries to modify current operations in a manner that could reasonably be expected to subject such Principal Company or any of its Subsidiaries to any additional obligations or requirements under any Environmental Laws that could reasonably be expected to result in, individually or in the aggregate, a Material Adverse Effect.

  • Non-Conforming Product If Reliant notifies Cardinal Health during the Review Period that the Manufacturing Sample does not conform to the warranty set forth in Section 13.1 and Cardinal Health agrees with Client’s determination, Client shall not be responsible to pay for such batch (the “Defective Product”), and Cardinal Health shall, at Reliant’s option, either (A) replace any Batch of non-conforming Product, or (B) credit any payments made by Reliant for such Batch. If Cardinal Health does not agree with Reliant’s determination that such Product fails to meet the warranty set forth in Section 13.1, then after reasonable efforts to resolve the disagreement, the Parties shall cause a mutually acceptable independent third party to review records, test data and to perform comparative tests and/or analyses on the Manufacturing Sample. The results of the independent review shall be final and binding. Unless otherwise agreed to by the Parties in writing, the costs associated with such testing and review shall be borne by the non-prevailing Party. THE OBLIGATION OF CARDINAL HEALTH TO (A) REPLACE DEFECTIVE PRODUCT IN ACCORDANCE WITH THE SPECIFICATIONS OR CREDIT PAYMENTS MADE BY RELIANT FOR DEFECTIVE PRODUCT AND (B) REIMBURSE RELIANT FOR API LOST IN THE DEFECTIVE BATCH, SUBJECT TO THE LIMITATIONS IN ARTICLE 15.1, SHALL BE RELIANT’S SOLE AND EXCLUSIVE REMEDY (WITHOUT PREJUDICE TO ANY INDEMNIFICATION OBLIGATIONS UNDER SECTION 14.1 OR THE OBLIGATIONS OF SECTION 10.6 (RECALL)) UNDER THIS ARTICLE FOR DEFECTIVE PRODUCT AND IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED.

  • Shipment If any of the Major Components associated with any Unit is not Shipped on or before (with the prior approval of the Buyer) the Scheduled Major Component Shipment Date set forth in Attachment 1 for reasons attributable to the Seller and not excused elsewhere in this Contract, the Seller shall pay as liquidated damages, and not as a penalty, a sum calculated in accordance with the table below for each Unit for each day of delay after the Scheduled Major Component Shipment Date as set forth in Attachment 1 until actual Shipment of the last Major Component for such Unit: Days after Scheduled Major Component Shipment Date Liquidated Damages (per day or partial day) *** *** *** *** *** *** Such liquidated damages, if any, shall be computed based on the date of Shipment of the last Major Component for a given Unit and such computations shall disregard any part of or accessory to the Major Component which may be shipped separately and arrive later unless such part of or accessory to the Major Component is necessary for the installation of the Major Component.

  • Acceptance or Rejection (a) The undersigned understands and agrees that the Company reserves the right to reject this subscription for the Shares if, in its reasonable judgment, it deems such action in the best interest of the Company, at any time prior to the Closing, notwithstanding prior receipt by the undersigned of notice of acceptance of the undersigned's subscription.

  • Notice to Lenders of Acceptance or Rejection of Bids The Administrative Agent shall promptly notify each Lender having submitted a Competitive Bid whether or not its offer has been accepted and, if its offer has been accepted, of the amount of the Bid Loan or Bid Loans to be made by it on the date of the applicable Bid Borrowing. Any Competitive Bid or portion thereof that is not accepted by the Borrower by the applicable time specified in Section 2.03(e) shall be deemed rejected.

Time is Money Join Law Insider Premium to draft better contracts faster.