European Dimension 49 Sample Clauses

Open Split View

Download

Share

Cite

European Dimension 49. Impact through Open Source and Standardisation 49

Sample 1

Save

Copy

Related to European Dimension 49

• Notice to European Union Users StatesideBPO, LLC's operations are located primarily in the United States. If you provide information to us, the information will be transferred out of the European Union (EU) and sent to the United States. (The adequacy decision on the EU-US Privacy became operational on August 1, 2016. This framework protects the fundamental rights of anyone in the EU whose personal data is transferred to the United States for commercial purposes. It allows the free transfer of data to companies that are certified in the US under the Privacy Shield.) By providing personal information to us, you are consenting to its storage and use as described in this Policy. Under the regulations of the General Data Protection Regulation ("GDPR") of the EU you have certain rights as a Data Subject. These rights are as follows: · The right to be informed: this means we must inform you of how we intend to use your personal data and we do this through the terms of this Policy. · The right of access: this means you have the right to request access to the data we hold about you and we must respond to those requests within one month. You can do this by sending an email to xxxx@xxxxxxxxxxxx.xxx. · The right to rectification: this means that if you believe some of the date, we hold is incorrect, you have the right to have it corrected. You can do this by logging into your account with us, or by sending us an email with your request. · The right to erasure: this means you can request that the information we hold be deleted, and we will comply unless we have a compelling reason not to, in which case you will be informed of same. You can do this by sending an email to xxxx@xxxxxxxxxxxx.xxx. · The right to restrict processing: this means you can change your communication preferences or opt-out of certain communications. You can do this by sending an email to xxxx@xxxxxxxxxxxx.xxx. · The right of data portability: this means you can obtain and use the data we hold for your own purposes without explanation. If you wish to request a copy of your information, contact us at xxxx@xxxxxxxxxxxx.xxx. · The right to object: this means you can file a formal objection with us regarding our use of your information with regard to third parties, or its processing where our legal basis is our legitimate interest in it. To do this, please send an email to xxxx@xxxxxxxxxxxx.xxx. In addition to the rights above, please rest assured that we will always aim to encrypt and anonymize your personal information whenever possible. We also have protocols in place in the unlikely event that we suffer a data breach and we will contact you if your personal information is ever at risk. For more details regarding our security protections see the section below or visit our website at xxx.xxxxxxxxxxxx.xxx.

• Technical Specifications and Drawings a) The Goods and Related Services supplied under this Contract shall conform to the technical specifications and standards mentioned in Section VI, Schedule of Requirements and, when no applicable standard is mentioned, the standard shall be equivalent or superior to the official standards whose application is appropriate to the Goods' country of origin. b) The Supplier shall be entitled to disclaim responsibility for any design, data, drawing, specification or other document, or any modification thereof provided or designed by or on behalf of the Procuring Entity, by giving a notice of such disclaimer to the Procuring Entity. c) Wherever references are made in the Contract to codes and standards in accordance with which it shall be executed, the edition or the revised version of such codes and standards shall be those specified in the Schedule of Requirements. During Contract execution, any changes in any such codes and standards shall be applied only after approval by the Procuring Entity and shall be treated in accordance with GCC Clause 33.

• Incremental Progression Three (3) Year Trained Teacher - Professional Development (a) Notwithstanding the provisions of paragraph 7.1.4 (f), a 3 year trained teacher may apply for progression by annual increments from Proficient 4 to 8 subject to the following conditions: (i) completion of at least twelve (12) months service on Proficient 4; (ii) participation in one hundred and fifty (150) hours of accredited professional development activities to be achieved at an annual average rate of not less than thirty (30) hours (five (5) days) and to be undertaken outside the hours engaged in teaching; and (iii) provision of a statement outlining the knowledge and skills acquired through participation in professional development. (b) Applications for progression identified in paragraph 7.1.6 (a) shall be made through the principal of the school and be subject to assessment and recommendation to the school authority by a panel consisting of: (i) a representative of the school authority; (ii) a representative of the teacher seeking progression; (iii) a representative jointly agreed to. (c) Applications for progression identified in paragraph 7.1.6 (a) shall include: (i) certification of participation in accredited professional development activities by activity providers; and (ii) a brief statement on a standard agreed, outlining the additional knowledge and skills acquired and their application in the teacher's work. (d) No teacher shall be required to undergo classroom or other inspection for the purposes of certification. (e) The review panel identified in paragraph 7.1.6 (b) shall make a recommendation to the employing authority as to whether in its opinion the teacher has satisfied the eligibility criteria in clause 7.1.6 (a). (f) A teacher who is assessed by the review panel as having satisfied the requirements contained in clause 7.1.6 (a) shall be entitled to progress to the next incremental pay step (Proficient 4 to 8 as appropriate) effective from their date of application or on the completion of twelve (12) months' service on their current incremental step (whichever is the later).

• Gold Open Access Articles May be shared according to the author-selected end-user license and should contain a CrossMark logo, the end user license, and a DOI link to the formal publication on ScienceDirect. Please refer to Elsevier's posting policy for further information.

• Updated Information Submission by Interconnection Customer The updated information submission by the Interconnection Customer, including manufacturer information, shall occur no later than one hundred eighty (180) Calendar Days prior to the Trial Operation. The Interconnection Customer shall submit a completed copy of the Electric Generating Unit data requirements contained in Appendix 1 to the LGIP. It shall also include any additional information provided to the Participating TO and the CAISO for the Interconnection Studies. Information in this submission shall be the most current Electric Generating Unit design or expected performance data. Information submitted for stability models shall be compatible with the Participating TO and CAISO standard models. If there is no compatible model, the Interconnection Customer will work with a consultant mutually agreed to by the Parties to develop and supply a standard model and associated information.

• European Monetary Union If, as a result of the implementation of European monetary union, (a) any currency ceases to be lawful currency of the nation issuing the same and is replaced by a European common currency, then any amount payable hereunder by any party hereto in such currency shall instead be payable in the European common currency and the amount so payable shall be determined by translating the amount payable in such currency to such European common currency at the exchange rate recognized by the European Central Bank for the purpose of implementing European monetary union, or (b) any currency and a European common currency are at the same time recognized by the central bank or comparable authority of the nation issuing such currency as lawful currency of such nation, then (i) any Loan made at such time shall be made in such European common currency and (ii) any other amount payable by any party hereto in such currency shall be payable in such currency or in such European common currency (in an amount determined as set forth in clause (a)), at the election of the obligor. Prior to the occurrence of the event or events described in clause (a) or (b) of the preceding sentence, each amount payable hereunder in any currency will continue to be payable only in that currency. The Borrowers agree, at the request of the Required Lenders, at the time of or at any time following the implementation of European monetary union, to enter into an agreement amending this Agreement in such manner as the Required Lenders shall reasonably request in order to avoid any unfair burden or disadvantage resulting from the implementation of such monetary union and to place the parties hereto in the position they would have been in had such monetary union not been implemented, the intent being that neither party will be adversely affected economically as a result of such implementation and that reasonable provisions may be adopted to govern the borrowing, maintenance and repayment of Loans denominated in any Alternative Currency or a European common currency after the occurrence of the event or events described in clause (a) or (b) of the preceding sentence.

• PROPOSED MOBILITY PROGRAMME The proposed mobility programme includes the indicative start and end months of the agreed study programme that the student will carry out abroad. The Learning Agreement must include all the educational components to be carried out by the student at the receiving institution (in table A) and it must contain as well the group of educational components that will be replaced in his/her degree by the sending institution (in table B) upon successful completion of the study programme abroad. Additional rows can be added as needed to tables A and B. Additional columns can also be added, for example, to specify the study cycle-level of the educational component. The presentation of this document may also be adapted by the institutions according to their specific needs. However, in every case, the two tables A and B must be kept separated, i.e. they cannot be merged. The objective is to make clear that there needs to be no one to one correspondence between the courses followed abroad and the ones replaced at the sending institutions. The aim is rather that a group of learning outcomes achieved abroad replaces a group of learning outcomes at the sending institution, without having a one to one correspondence between particular modules or courses. A normal academic year of full-time study is normally made up of educational components totalling 60 ECTS* credits. It is recommended that for mobility periods shorter than a full academic year, the educational components selected should equate to a roughly proportionate number of credits. In case the student follows additional educational components beyond those required for his/her degree programme, these additional credits must also be listed in the study programme outlined in table A. When mobility windows are embedded in the curriculum, it will be enough to fill in table B with a single line as described below: Component code (if any) Component title (as indicated in the course catalogue) at the sending institution Semester [autumn / spring] [or term] Number of ECTS* credits Mobility window … Total: 30 Otherwise, the group of components will be included in Table B as follows: Component code (if any) Component title (as indicated in the course catalogue) at the sending institution Semester [autumn / spring] [or term] Number of ECTS* credits Course x … 10 Module y … 10 Laboratory work … 10 Total: 30 The sending institution must fully recognise the number of ECTS* credits contained in table A if there are no changes to the study programme abroad and the student successfully completes it. Any exception to this rule should be clearly stated in an annex of the Learning Agreement and agreed by all parties. Example of justification for non-recognition: the student has already accumulated the number of credits required for his/her degree and does not need some of the credits gained abroad. Since the recognition will be granted to a group of components and it does not need to be based on a one to one correspondence between single educational components, the sending institution must foresee which provisions will apply if the student does not successfully complete some of the educational components from his study programme abroad. A web link towards these provisions should be provided in the Learning Agreement. The student will commit to reach a certain level of language competence in the main language of instruction by the start of the study period. The level of the student will be assessed after his/her selection with the Erasmus+ online assessment tool when available (the results will be sent to the sending institution) or else by any other mean to be decided by the sending institution. A recommended level has been agreed between the sending and receiving institutions in the inter-institutional agreement. In case the student would not already have this level when he/she signs the Learning Agreement, he/she commits to reach it with the support to be provided by the sending or receiving institution (either with courses that can be funded by the organisational support grant or with the Erasmus+ online tutored courses). All parties must sign the document; however, it is not compulsory to circulate papers with original signatures, scanned copies of signatures or digital signatures may be accepted, depending on the national legislation. * In countries where the "ECTS" system it is not in place, in particular for institutions located in partner countries not participating in the Bologna process, "ECTS" needs to be replaced in all tables by the name of the equivalent system that is used and a weblink to an explanation to the system should be added. The section to be completed during the mobility is needed only if changes have to be introduced into the original Learning Agreement. In that case, the section to be completed before the mobility should be kept unchanged and changes should be described in this section. Changes to the mobility study programme should be exceptional, as the three parties have already agreed on a group of educational components that will be taken abroad, in the light of the course catalogue that the receiving institution has committed to publish well in advance of the mobility periods and to update regularly as ECHE holder. However, introducing changes might be unavoidable due to, for example, timetable conflicts. Other reasons for a change can be the request for an extension of the duration of the mobility programme abroad. Such a request can be made by the student at the latest one month before the foreseen end date. These changes to the mobility study programme should be agreed by all parties within four to seven weeks (after the start of each semester). Any party can request changes within the first two to five-week period after regular classes/educational components have started for a given semester. The exact deadline has to be decided by the institutions. The shorter the planned mobility period, the shorter should be the window for changes. All these changes have to be agreed by the three parties within a two-week period following the request. In case of changes due to an extension of the duration of the mobility period, changes should be made as timely as possible as well. Changes to the study programme abroad should be listed in table C and, once they are agreed by all parties, the sending institution commits to fully recognise the number of ECTS credits as presented in table C. Any exception to this rule should be documented in an annex of the Learning Agreement and agreed by all parties. Only if the changes described in table C affect the group of educational components in the student's degree (table B) that will be replaced at the sending institution upon successful completion of the study programme abroad, a revised version should be inserted and labelled as "Table D: Revised group of educational components in the student's degree that will be replaced at sending institution". Additional rows and columns can be added as needed to tables C and D. All parties must confirm that the proposed amendments to the Learning Agreement are approved. For this specific section, original or scanned signatures are not mandatory and an approval by email may be enough. The procedure has to be decided by the sending institution, depending on the national legislation.

• Number Resources, Rate Center Areas and Routing Points 8.1 Nothing in this Agreement shall be construed to limit or otherwise adversely affect in any manner either Party’s right to employ or to request and be assigned any Central Office Codes (“NXX”) pursuant to the Central Office Code Assignment Guidelines and any relevant FCC or Commission orders, as may be amended from time to time, or to establish, by Tariff or otherwise, Rate Center Areas and Routing Points corresponding to such NXX codes. 8.2 It shall be the responsibility of each Party to program and update its own switches and network systems pursuant to information provided in the LERG in order to recognize and route traffic to the other Party’s assigned NXX codes. Except as expressly set forth in this Agreement, neither Party shall impose any fees or charges whatsoever on the other Party for such activities. 8.3 Unless otherwise required by Commission order, the Rate Center Areas will be the same for each Party. During the term of this Agreement, Onvoy shall adopt the Rate Center Area and Rate Center Points that the Commission has approved for Frontier within the LATA and Tandem serving area. Onvoy shall assign whole NPA-NXX codes to each Rate Center Area unless otherwise ordered by the FCC, the Commission or another governmental entity of appropriate jurisdiction, or the LEC industry adopts alternative methods of utilizing NXXs. 8.4 Onvoy will also designate a Routing Point for each assigned NXX code. Onvoy shall designate one location for each Rate Center Area in which the Onvoy has established NXX code(s) as the Routing Point for the NPA-NXXs associated with that Rate Center Area, and such Routing Point shall be within the same LATA as the Rate Center Area but not necessarily within the Rate Center Area itself. Unless specified otherwise, calls to subsequent NXXs of Onvoy will be routed in the same manner as calls to Xxxxx’s initial NXXs. 8.5 Notwithstanding anything to the contrary contained herein, nothing in this Agreement is intended, and nothing in this Agreement shall be construed, to in any way constrain Onvoy’s choices regarding the size of the local calling area(s) that Onvoy may establish for its Customers, which local calling areas may be larger than, smaller than, or identical to Frontier’s local calling areas.

• As-Built Drawings Within thirty (30) Days of the successful completion of the Acceptance Test, Seller shall provide for Company review a set of the proposed as‑built drawings for the Company-Owned Interconnection Facilities constructed by Seller (and/or its Contractors). Within thirty (30) Days of Company's receipt of the proposed as‑built drawings, Company shall provide Seller with either (i) its comments on the proposed as‑built drawings or (ii) notice of acceptance of the proposed as‑built drawings as final as‑built drawings. If Company provides comments on the proposed as‑built drawings, Seller shall incorporate such comments into a final set of as‑built drawings and provide such final as‑built drawings to Company within twenty (20) Days of Seller's receipt of Company's comments.

• Data Universal Number System (DUNS) number Requirement Grantee will provide their valid DUNS number contemporaneous with execution of this Agreement.