ADDITIONAL SPECIAL CONTRACT CONDITIONS Special Contract Conditions revisions: the corresponding subsections of the Special Contract Conditions referenced below are replaced in their entirety with the following:
– OTHER SPECIAL CONDITIONS I.
12.1 Exchange rate applicable for the conversion of currencies into euro Payments shall be made by the Commission in euro. The co-ordinator shall submit the payment requests in accordance with article I.5.3, including the underlying financial statements, in euro. By way of derogation from article II.16.1, any conversion of actual costs into euro shall be made by the beneficiary at the monthly accounting rate established by the Commission and published on its website applicable on the day when the cost was incurred.
Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification.
2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length.
2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A.
2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties.
2.5.5 Rates for ULM are as set forth in Exhibit A.
2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned.
2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition.
2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.
Commercial Operation Date Testing and Modifications Prior to the Commercial Operation Date, the Connecting Transmission Owner shall test the Connecting Transmission Owner’s Attachment Facilities and System Upgrade Facilities and System Deliverability Upgrades and Developer shall test the Large Generating Facility and the Developer Attachment Facilities to ensure their safe and reliable operation. Similar testing may be required after initial operation. Developer and Connecting Transmission Owner shall each make any modifications to its facilities that are found to be necessary as a result of such testing. Developer shall bear the cost of all such testing and modifications. Developer shall generate test energy at the Large Generating Facility only if it has arranged for the injection of such test energy in accordance with NYISO procedures.
Additional Conditions Precedent No Lender has any ------------------------------- obligation to make any Loan (including its first), and LC Issuer has no obligation to issue any Letter of Credit (including its first), unless the following conditions precedent have been satisfied:
(a) All representations and warranties made by any Restricted Person in any Loan Document shall be true on and as of the date of such Loan or the date of issuance of such Letter of Credit as if such representations and warranties had been made as of the date of such Loan or the date of issuance of such Letter of Credit except to the extent that such representation or warranty was made as of a specific date or updated, modified or supplemented as of a subsequent date with the consent of Majority Lenders.
(b) No Default shall exist at the date of such Loan or the date of issuance of such Letter of Credit.
(c) No Material Adverse Change shall have occurred to, and no event or circumstance shall have occurred that could cause a Material Adverse Change to, Plains MLP's or Borrower's Consolidated financial condition or businesses since the date of the Initial Financial Statements.
(d) Each Restricted Person shall have performed and complied with all agreements and conditions required in the Loan Documents to be performed or complied with by it on or prior to the date of such Loan or the date of issuance of such Letter of Credit.
(e) The making of such Loan or the issuance of such Letter of Credit shall not be prohibited by any Law and shall not subject any Lender or any LC Issuer to any penalty or other onerous condition under or pursuant to any such Law.
(f) Administrative Agent shall have received all documents and instruments which Administrative Agent has then requested, in addition to those described in Section 4.1 (including opinions of legal counsel for Restricted Persons and Administrative Agent; corporate documents and records; documents evidencing governmental authorizations, consents, approvals, licenses and exemptions; and certificates of public officials and of officers and representatives of Borrower and other Persons), as to (i) the accuracy and validity of or compliance with all representations, warranties and covenants made by any Restricted Person in this Agreement and the other Loan Documents, (ii the satisfaction of all conditions contained herein or therein, and (ii all other matters pertaining hereto and thereto. All such additional documents and instruments shall be satisfactory to Administrative Agent in form, substance and date.
Agreement Deviation/Compliance Does the vendor agree with the language in the Vendor Agreement?
Additional Conditions As a condition to any such assignment or subletting, whether or not Landlord’s consent is required, Landlord may require:
(i) that any assignee or subtenant agree, in writing at the time of such assignment or subletting, that if Landlord gives such party notice that Tenant is in default under this Lease, such party shall thereafter make all payments otherwise due Tenant directly to Landlord, which payments will be received by Landlord without any liability except to credit such payment against those due under the Lease, and any such third party shall agree to attorn to Landlord or its successors and assigns should this Lease be terminated for any reason; provided, however, in no event shall Landlord or its successors or assigns be obligated to accept such attornment; and
(ii) A list of Hazardous Materials, certified by the proposed assignee or sublessee to be true and correct, which the proposed assignee or sublessee intends to use, store, handle, treat, generate in or release or dispose of from the Premises, together with copies of all documents relating to such use, storage, handling, treatment, generation, release or disposal of Hazardous Materials by the proposed assignee or subtenant in the Premises or on the Project, prior to the proposed assignment or subletting, including, without limitation: permits; approvals; reports and correspondence; storage and management plans; plans relating to the installation of any storage tanks to be installed in or under the Project (provided, said installation of tanks shall only be permitted after Landlord has given its written consent to do so, which consent may be withheld in Landlord’s sole and absolute discretion); and all closure plans or any other documents required by any and all federal, state and local Governmental Authorities for any storage tanks installed in, on or under the Project for the closure of any such tanks. Neither Tenant nor any such proposed assignee or subtenant is required, however, to provide Landlord with any portion(s) of the such documents containing information of a proprietary nature which, in and of themselves, do not contain a reference to any Hazardous Materials or hazardous activities.
Minimum Site Requirements for TIPS Sales (when applicable to TIPS Sale). Cleanup: When performing work on site at a TIPS Member’s property, Vendor shall clean up and remove all debris and rubbish resulting from their work as required or directed by the TIPS Member or as agreed by the parties. Upon completion of work, the premises shall be left in good repair and an orderly, neat, clean and unobstructed condition. Preparation: Vendor shall not begin a project for which a TIPS Member has not prepared the site, unless Vendor does the preparation work at no cost, or until TIPS Member includes the cost of site preparation in the TIPS Sale Site preparation includes, but is not limited to: moving furniture, installing wiring for networks or power, and similar pre‐installation requirements. Registered Sex Offender Restrictions: For work to be performed at schools, Vendor agrees that no employee of Vendor or a subcontractor who has been adjudicated to be a registered sex offender will perform work at any time when students are, or reasonably expected to be, present unless otherwise agreed by the TIPS Member. Vendor agrees that a violation of this condition shall be considered a material breach and may result in the cancellation of the TIPS Sale at the TIPS Member’s discretion. Vendor must identify any additional costs associated with compliance of this term. If no costs are specified, compliance with this term will be provided at no additional charge. Safety Measures: Vendor shall take all reasonable precautions for the safety of employees on the worksite, and shall erect and properly maintain all necessary safeguards for protection of workers and the public. Vendor shall post warning signs against all hazards created by the operation and work in progress. Proper precautions shall be taken pursuant to state law and standard practices to protect workers, general public and existing structures from injury or damage. Smoking: Persons working under Agreement shall adhere to the TIPS Member’s or local smoking statutes, codes, ordinances, and policies.
Agreement Exceptions/Deviations Explanation If the proposing Vendor desires to deviate form the Vendor Agreement language, all such deviations must be listed on this attribute, with complete and detailed conditions and information included. TIPS will consider any deviations in its proposal award decisions, and TIPS reserves the right to accept or reject any proposal based upon any deviations indicated below. In the absence of any deviation entry on this attribute, the proposer assures TIPS of their full compliance with the Vendor Agreement.
ORIGINAL CONDITIONS A. All reinsurance under this Contract shall be subject to the same rates, terms, conditions, waivers and interpretations and to the same modifications and alterations as the Policy, subject to the terms and conditions of this Contract, and the Reinsurer shall be credited with its exact proportion of the Insured's premiums due to the Company under the Policy.
B. Nothing herein shall in any manner create any obligation or establish any right against the Reinsurer in favor of third parties or any persons not parties to this Contract except as provided with respect to the Insured in this Contract or in the Assumption of Liability Endorsement.
C. In the event of a Quota Share Reduction, as that term is defined under the Policy, each Subscribing Reinsurer's participation percentage in this Contract shall be increased in the proportion that 100% bears to the total Subscribing Reinsurer's participation after the Quota Share Reduction. For the avoidance of doubt, such participation percentage increase is necessary to account for the reduction provisions of the Reduction Under Quota Share Contract Article of the Policy. If applicable, the Remaining Aggregate Retention, as that term is defined under the Policy, would likewise be adjusted. Any termination of a Subscribing Reinsurer's participation in this Contract shall not require the consent of any other Subscribing Reinsurer. As respects each Subscribing Reinsurer still participating on this Contract following the Reinsurer Reduction Date, as that term is defined under the Policy, in no event shall its share of the aggregate limit following the Reinsurer Reduction Date be greater than its share of the aggregate limit prior to the Reinsurer Reduction Date, notwithstanding that its participation percentage may increase as a result thereof. As an example, where the aggregate limit is $300,000,000 with each of three Subscribing Reinsurers retaining a 33.33% share ($100,000,000 each), and one Subscribing Reinsurer's share is terminated, then the resulting aggregate limit becomes $200,000,000 with each of the two remaining Subscribing Reinsurers retaining a 50.00% share (i.e., 33.33% x 100%/66.67%). As respects each of the two remaining Subscribing Reinsurers, its share of the aggregate limit shall remain at $100,000,000.
