Factors Related to Mobility and Reassignment Sample Clauses

Factors Related to Mobility and Reassignment. 52.02.01 Mobility is a voluntary process and must be attempted first to address all staffing needs. 52.02.02 The Joint Staffing Committee finalizes moves at such times as it may deem appropriate, subject to the following terms. 52.02.03 A Teacher's Mobility is deemed to be complete when agreed to by the Joint Staffing Committee and the Teacher. The Memorandum of Mobility, signed by the Teacher and the Superintendent of the Board, specifies the nature, the term and any other conditions of the move. 52.02.04 A Teacher may serve two consecutive years on Mobility to the same school. At the end of two years, a Teacher must return to his/her home school or become a permanent member of the school to which the Teacher is on Mobility assignment, subject to the Transfer and Surplus process and the approval of the receiving principal. 52.02.05 The Principals and Senior Administration, in consultation with the Joint Staffing Committee, retain the right to use a process of reassignment to address program and staffing needs which may not have been met through the mobility process. 52.02.05.01 Administrative reassignments are confirmed in a Memorandum of Reassignment from Senior Administration to the Teacher. 52.02.05.02 When, as a result of the deliberations of the Joint Staffing Committee, the possibility of the need for a reassignment of a Teacher appears likely, the Teacher is informed by the Principal of his/her current school that a move is being considered. The reasons for the reassignment are listed. This information is given in the presence of the Branch President. The Teacher may provide information pertinent to the proposed reassignment to the Principal and the Branch President within twenty-four hours of receipt of this notice. 52.02.05.03 As a result of the administrative reassignment, no Department Head/Teacher in Charge of an Organizational Unit receives a reduction in Units of Administrative Strength. 52.02.05.04 Teachers who have been reassigned may apply for Mobility to an alternate school from their new school. 52.02.06 If a Teacher's percentage of time is altered during any staffing process, the Teacher retains entitlement to his/her highest percentage of teaching time. Other reductions or increases in teaching assignments may only be effected by the mutual consent of the parties. 52.02.07 Except by mutual agreement, part-time positions are designed in such a way that a part-time Teacher who is moved does not spend more than one period between schedul...
AutoNDA by SimpleDocs
Factors Related to Mobility and Reassignment. 02.01 Mobility is a voluntary process and must be attempted first to address all staffing needs. 02.02 The Joint Staffing Committee finalizes moves at such times as it may deem appropriate, subject to the following terms.

Related to Factors Related to Mobility and Reassignment

  • Vendor’s Resellers as Related to This Agreement Vendor’s Named Resellers (“Resellers”) under this Agreement shall comply with all terms and conditions of this agreement and all addenda or incorporated documents. All actions related to sales by Authorized Vendor’s Resellers under this Agreement are the responsibility of the awarded Vendor. If Resellers fail to report sales to TIPS under your Agreement, the awarded Vendor is responsible for their contractual failures and shall be billed for the fees. The awarded Vendor may then recover the fees from their named reseller. If there is a dispute between the awarded Vendor and TIPS Member, TIPS or its representatives may, at TIPS sole discretion, assist in conflict resolution if requested by either party. TIPS, or its representatives, reserves the right to inspect any project and audit the awarded Vendor’s TIPS project files, documentation and correspondence related to the requesting TIPS Member’s order. If there are confidentiality requirements by either party, TIPS shall comply to the extent permitted by law. The TIPS Solicitation which resulted in this Vendor Agreement, whether a Request for Proposals, the Request for Competitive Sealed Proposals or Request for Qualifications solicitation, or other, the Vendor’s response to same and all associated documents and forms made part of the solicitation process, including any addenda, are hereby incorporated by reference into this Agreement as if copied verbatim. THE SECTON HEADERS OR TITLES WITHIN THIS DOCUMENT ARE MERELY GUIDES FOR CONVENIENCE AND ARE NOT FOR CLASSIFICATION OR LIMITING OF THE RESPONSIBILITES OF THE PARTIES TO THIS DOCUMENT. Texas governmental entities are prohibited from doing business with companies that fail to certify to this condition as required by Texas Government Code Sec. 2270. By executing this agreement, you certify that you are authorized to bind the undersigned Vendor and that your company (1) does not boycott Israel; and (2) will not boycott Israel during the term of the Agreement. You certify that your company is not listed on and does not and will not do business with companies that are on the Texas Comptroller of Public Accounts list of Designated Foreign Terrorists Organizations per Texas Gov't Code 2270.0153 found at xxxxx://xxxxxxxxxxx.xxxxx.xxx/purchasing/docs/foreign-terrorist.pdf You certify that if the certified statements above become untrue at any time during the life of this Agreement that the Vendor will notify TIPS within three (3) business day of the change by a letter on Vendor’s letterhead from and signed by an authorized representative of the Vendor stating the non-compliance decision and the TIPS Agreement number and description at: Attention: General Counsel ESC Region 8/The Interlocal Purchasing System (TIPS) 0000 Xxxxxxx 000 Xxxxx Xxxxxxxxx, XX,00000 And by an email sent to xxxx@xxxx-xxx.xxx The undersigned Vendor agrees to maintain the below minimum insurance requirements for TIPS Contract Holders: When the Vendor or its subcontractors are liable for any damages or claims, the Vendor’s policy, when the Vendor is responsible for the claim, must be primary over any other valid and collectible insurance carried by the Member. Any immunity available to TIPS or TIPS Members shall not be used as a defense by the contractor's insurance policy. The coverages and limits are to be considered minimum requirements and in no way limit the liability of the Vendor(s). Insurance shall be written by a carrier with an A-; VII or better rating in accordance with current A.M. Best Key Rating Guide. Only deductibles applicable to property damage are acceptable, unless proof of retention funds to cover said deductibles is provided. "Claims made" policies will not be accepted. Vendor’s required minimum coverage shall not be suspended, voided, cancelled, non-renewed or reduced in coverage or in limits unless replaced by a policy that provides the minimum required coverage except after thirty (30) days prior written notice by certified mail, return receipt requested has been given to TIPS or the TIPS Member if a project or pending delivery of an order is ongoing. Upon request, certified copies of all insurance policies shall be furnished to the TIPS or the TIPS Member. • Orders: All Vendor orders received from TIPS Members must be emailed to TIPS at tipspo@tips- xxx.xxx. Should a TIPS Member send an order directly to the Vendor, it is the Vendor’s responsibility to forward a copy of the order to TIPS at the email above within 3 business days and confirm its receipt with TIPS. • Vendor Encouraging Members to bypass TIPS agreement: Encouraging TIPS Members to purchase directly from the Vendor or through another agreement, when the Member has requested using the TIPS cooperative Agreement or price, and thereby bypassing the TIPS Agreement is a violation of the terms and conditions of this Agreement and will result in removal of the Vendor from the TIPS Program. • Order Confirmation: All TIPS Member Agreement orders are approved daily by TIPS and sent to the Vendor. The Vendor should confirm receipt of orders to the TIPS Member (customer) within 3 business days. • Vendor custom website for TIPS: If Vendor is hosting a custom TIPS website, updated pricing when effective. TIPS shall be notified when prices change in accordance with the award.

  • Geographic Area and Sector Specific Allowances, Conditions and Exceptions The following allowances and conditions shall apply where relevant. Where the Employer does work which falls under the following headings, the Employer agrees to pay and observe the relevant respective conditions and/or exceptions set out below in each case.

  • Vendor’s Resellers as Related to This Agreement

  • What Will Happen After We Receive Your Letter When we receive your letter, we must do two things:

  • Certification Regarding Termination of Contract for Non-Compliance (Tex Gov. Code 552.374)

  • Certification Regarding Business with Certain Countries and Organizations Pursuant to Subchapter F, Chapter 2252, Texas Government Code, PROVIDER certifies it is not engaged in business with Iran, Sudan, or a foreign terrorist organization. PROVIDER acknowledges this Purchase Order may be terminated if this certification is or becomes inaccurate.

  • Absence of Defaults and Conflicts Resulting from Transaction The execution, delivery and performance of this Agreement, and the sale of the Securities, will not result in a breach or violation of any of the terms and provisions of, or constitute a default or a Debt Repayment Triggering Event (as defined below) under, or result in the imposition of any lien, charge or encumbrance upon any property or assets of the Company or any of its subsidiaries pursuant to, (A) the charter, by-laws or similar organizational documents of the Company or any of its subsidiaries, (B) any statute, rule, regulation or order of any governmental agency or body or any court, domestic or foreign, having jurisdiction over the Company or any of its subsidiaries or any of their properties, or (C) any agreement or instrument to which the Company or any of its subsidiaries is a party or by which the Company or any of its subsidiaries is bound or to which any of the properties of the Company or any of its subsidiaries is subject except, in the case of clauses (B) and (C) above, any breach, violation, default, lien, charge or encumbrance that would not, individually or in the aggregate, reasonably be expected to have a Material Adverse Effect; a “Debt Repayment Triggering Event” means any event or condition that gives, or with the giving of notice or lapse of time would give, the holder of any note, debenture, or other evidence of indebtedness (or any person acting on such holder’s behalf) the right to require the repurchase, redemption or repayment of all or a portion of such indebtedness by the Company or any of its subsidiaries.

  • CERTIFICATION PROHIBITING DISCRIMINATION AGAINST FIREARM AND AMMUNITION INDUSTRIES (Texas law as of September 1, 2021) By submitting a proposal to this Solicitation, you certify that you agree, when it is applicable, to the following required by Texas law as of September 1, 2021: If (a) company is not a sole proprietorship; (b) company has at least ten (10) full-time employees; (c) this contract has a value of at least $100,000 that is paid wholly or partly from public funds; (d) the contract is not excepted under Tex. Gov’t Code § 2274.003 of SB 19 (87th leg.); and (e) governmental entity has determined that company is not a sole-source provider or governmental entity has not received any bids from a company that is able to provide this written verification, the following certification shall apply; otherwise, this certification is not required. Pursuant to Tex. Gov’t Code Ch. 2274 of SB 19 (87th session), the company hereby certifies and verifies that the company, or association, corporation, partnership, joint venture, limited partnership, limited liability partnership, or limited liability company, including a wholly owned subsidiary, majority-owned subsidiary parent company, or affiliate of these entities or associations, that exists to make a profit, does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association and will not discriminate during the term of this contract against a firearm entity or firearm trade association. For purposes of this contract, “discriminate against a firearm entity or firearm trade association” shall mean, with respect to the entity or association, to: “ (1) refuse to engage in the trade of any goods or services with the entity or association based solely on its status as a firearm entity or firearm trade association; (2) refrain from continuing an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association; or (3) terminate an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association. See Tex. Gov’t Code § 2274.001(3) of SB 19. “Discrimination against a firearm entity or firearm trade association” does not include: “ (1) the established policies of a merchant, retail seller, or platform that restrict or prohibit the listing or selling of ammunition, firearms, or firearm accessories; and (2) a company’s refusal to engage in the trade of any goods or services, decision to refrain from continuing an existing business relationship, or decision to terminate an existing business relationship to comply with federal, state, or local law, policy, or regulations or a directive by a regulatory agency, or for any traditional business reason that is specific to the customer or potential customer and not based solely on an entity’s or association’s status as a firearm entity or firearm trade association.” See Tex. Gov’t Code § 2274.001(3) of SB 19.

  • Press Releases and Related Matters Each Credit Party executing this Agreement agrees that neither it nor its Affiliates will in the future issue any press releases or other public disclosure using the name of GE Capital or its affiliates or referring to this Agreement, the other Loan Documents or the Related Transactions Documents without at least 2 Business Days' prior notice to GE Capital and without the prior written consent of GE Capital unless (and only to the extent that) such Credit Party or Affiliate is required to do so under law and then, in any event, such Credit Party or Affiliate will consult with GE Capital before issuing such press release or other public disclosure. Each Credit Party consents to the publication by Agent or any Lender of a tombstone or similar advertising material relating to the financing transactions contemplated by this Agreement. Agent reserves the right to provide to industry trade organizations information necessary and customary for inclusion in league table measurements.

  • Electronic and Information Resources Accessibility and Security Standards a. Applicability: The following Electronic and Information Resources (“EIR”) requirements apply to the Contract because the Grantee performs services that include EIR that the System Agency's employees are required or permitted to access or members of the public are required or permitted to access. This Section does not apply to incidental uses of EIR in the performance of the Agreement, unless the Parties agree that the EIR will become property of the State of Texas or will be used by HHSC’s clients or recipients after completion of the Agreement. Nothing in this section is intended to prescribe the use of particular designs or technologies or to prevent the use of alternative technologies, provided they result in substantially equivalent or greater access to and use of a Product.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!