Failure to Comply With Specifications and Volumes
Failure to Comply With Specifications and Volumes Sample Clauses
Related to Failure to Comply With Specifications and Volumes
Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.
Failure to Comply with the 1934 Act So long as the Buyer beneficially owns the Note, the Company shall comply with the reporting requirements of the 1934 Act; and the Company shall continue to be subject to the reporting requirements of the 1934 Act.
Product Specifications (a) Supplier shall manufacture all Products according to the Specifications in effect as of the date of this Agreement, with such changes or additions to the Specifications of the Products related thereto as shall be requested by Buyer in accordance with this Section or as otherwise agreed in writing by the Parties. All other Products shall be manufactured with such Specifications as the Parties shall agree in writing. (b) Buyer may request changed or additional Specifications for any Product by delivering written notice thereof to Supplier not less than one hundred twenty (120) days in advance of the first Firm Order for such Product to be supplied with such changed or additional Specifications. Notwithstanding the foregoing, if additional advance time would reasonably be required in order to implement the manufacturing processes for production of a Product with any changed or additional Specifications, and to commence manufacture and delivery thereof, Supplier shall so notify Buyer, and Supplier shall not be required to commence delivery of such Product until the passage of such additional time. (c) Supplier shall be required to accommodate any change of, or additions to, the Specifications for any Product, if and only if (i) in Supplier’s good faith judgment, such changed or additional Specifications would not require Supplier to violate good manufacturing practice, (ii) the representation and warranty of Buyer deemed made pursuant to Subsection (e) below is true and correct, and (iii) Buyer agrees to reimburse Supplier for the incremental costs and expenses incurred by Supplier in accommodating the changed or additional Specifications, including the costs of acquiring any new machinery and tooling. For the avoidance of doubt, such costs and expenses shall be payable by Buyer separately from the cost of Products at such time or times as Supplier shall request. (d) Supplier shall notify Buyer in writing within thirty (30) days of its receipt of any request for changed or additional Specifications (i) whether Supplier will honor such changed or additional Specifications, (ii) if Supplier declines to honor such changed or additional Specifications, the basis therefor and (iii) if applicable, the estimated costs and expenses that Buyer will be required to reimburse Supplier in respect of the requested changes or additions, as provided in Subsection (c) above. Buyer shall notify Supplier in writing within fifteen (15) days after receiving notice of any required reimbursement whether Buyer agrees to assume such reimbursement obligation. (e) By its request for any changed or additional Specifications for any Product, Buyer shall be deemed to represent and warrant to Supplier that the manufacture and sale of the Product incorporating Buyer’s changed or additional Specifications, as a result of such incorporation, will not and could not reasonably be expected to (i) violate or conflict with any contract, agreement, arrangement or understanding to which Buyer and/or any of its Affiliates is a party, including this Agreement and any other contract, agreement, arrangement or understanding with Supplier and/or its Affiliates, (ii) infringe on any trademark, service xxxx, copyright, patent, trade secret or other intellectual property rights of any Person, or (iii) violate any Applicable Law. Buyer shall indemnify and hold Supplier and its Affiliates harmless (including with respect to reasonable attorneys’ fees and disbursements) from any breach of this representation and warranty.
Stipulated Penalties for Failure to Comply with Certain Obligations As a contractual remedy, the Friendship Entities and OIG hereby agree that failure to comply with certain obligations as set forth in this CIA may lead to the imposition of the following monetary penalties (hereinafter referred to as “Stipulated Penalties”) in accordance with the following provisions. 1. A Stipulated Penalty of $2,500 (which shall begin to accrue on the day after the date the obligation became due) for each day the Friendship Entities fail to establish and implement any of the following obligations as described in Sections III and IV: a. a Compliance Officer; b. a Compliance Committee; c. the Board of Directors compliance obligations and the engagement of a Compliance Expert, the performance of a Compliance Program Review and the preparation of a Compliance Program Review Report, as required by Section III.A.3.; d. the management certification obligations; e. a written Code of Conduct; f. written Policies and Procedures; g. the development and/or implementation of a Training Plan for the training of Covered Persons, Relevant Covered Persons, and Board Members; h. a risk assessment and internal review process as required by Section III.E; i. a Disclosure Program; j. Ineligible Persons screening and removal requirements; k. notification of Government investigations or legal proceedings; l. policies and procedures regarding the repayment of Overpayments; m. the repayment of Overpayments as required by Section III.I and Appendix B; n. reporting of Reportable Events; and o. disclosure of changes to business units or locations. 2. A Stipulated Penalty of $2,500 (which shall begin to accrue on the day after the date the obligation became due) for each day the Friendship Entities fail to engage and use an IRO, as required by Section III.D, Appendix A, or Appendix B. 3. A Stipulated Penalty of $2,500 (which shall begin to accrue on the day after the date the obligation became due) for each day the Friendship Entities fail to submit the Implementation Report or any Annual Reports to OIG in accordance with the requirements of Section V by the deadlines for submission. 4. A Stipulated Penalty of $2,500 (which shall begin to accrue on the day after the date the obligation became due) for each day the Friendship Entities fail to submit any Claims Review or Additional Items Review Report in accordance with the requirements of Section III.D and Appendix B. 5. A Stipulated Penalty of $1,500 for each day the Friendship Entities fail to grant access as required in Section VII. (This Stipulated Penalty shall begin to accrue on the date the Friendship Entities fail to grant access.) 6. A Stipulated Penalty of $50,000 for each false certification submitted by or on behalf of the Friendship Entities as part of their Implementation Report, any Annual Report, additional documentation to a report (as requested by the OIG), or otherwise required by this CIA. 7. A Stipulated Penalty of $1,000 for each day the Friendship Entities fail to comply fully and adequately with any obligation of this CIA. OIG shall provide notice to the Friendship Entities stating the specific grounds for its determination that the Friendship Entities have failed to comply fully and adequately with the CIA obligation(s) at issue and steps the Friendship Entities shall take to comply with the CIA. (This Stipulated Penalty shall begin to accrue 10 days after the date the Friendship Entities receive this notice from OIG of the failure to comply.) A Stipulated Penalty as described in this Subsection shall not be demanded for any violation for which OIG has sought a Stipulated Penalty under Subsections 1- 6 of this Section.
The Specifications The Specifications are that portion of the Contract Documents consisting of the written requirements for materials, equipment, systems, standards and workmanship for the Work, and performance of related services.
Conformity with TIA Each amendment of this Indenture executed under this Article IX will conform to the requirements of the TIA as then in effect so long as this Indenture is qualified under the TIA.
Amendment to Comply with Law The Parties acknowledge that state and federal laws and regulations relating to data security and privacy are rapidly evolving and that amendment of this Agreement may be required to provide procedures to ensure compliance with such developments. i. In the event of any change to state or federal laws and regulations relating to data security and privacy affecting this Agreement, the Parties shall take such action as is necessary to implement the changes to the standards and requirements of HIPAA, the HIPAA Rules and other applicable rules relating to the confidentiality, integrity, availability and security of PHI with respect to this Agreement. ii. Business Associate shall provide to Covered Entity written assurance satisfactory to Covered Entity that Business Associate shall adequately safeguard all PHI, and obtain written assurance satisfactory to Covered Entity from Business Associate’s Subcontractors and agents that they shall adequately safeguard all PHI. iii. Upon the request of either Party, the other Party promptly shall negotiate in good faith the terms of an amendment to the Contract embodying written assurances consistent with the standards and requirements of HIPAA, the HIPAA Rules, or other applicable rules. iv. Covered Entity may terminate this Agreement upon 30 days’ prior written notice in the event that: A. Business Associate does not promptly enter into negotiations to amend the Contract and this Agreement when requested by Covered Entity pursuant to this Section; or B. Business Associate does not enter into an amendment to the Contract and this Agreement, which provides assurances regarding the safeguarding of PHI sufficient, in Covered Entity’s sole discretion, to satisfy the standards and requirements of the HIPAA, the HIPAA Rules and applicable law.
DAF Specifications Developer shall submit initial specifications for the DAF, including System Protection Facilities, to Connecting Transmission Owner and NYISO at least one hundred eighty (180) Calendar Days prior to the Initial Synchronization Date; and final specifications for review and comment at least ninety (90) Calendar Days prior to the Initial Synchronization Date. Connecting Transmission Owner and NYISO shall review such specifications to ensure that the DAF are compatible with the technical specifications, operational control, and safety requirements of the Connecting Transmission Owner and NYISO and comment on such specifications within thirty (30) Calendar Days of Developer’s submission. All specifications provided hereunder shall be deemed to be Confidential Information.
Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.
Changes to Specifications All Specifications and any changes thereto agreed to by the parties from time to time shall be in writing, dated and signed by the parties. Any change to the Process shall be deemed a Specification change. No change in the Specifications shall be implemented by Catalent, whether requested by Client or requested or required by any Regulatory Authority, until the parties have agreed in writing to such change, the implementation date of such change, and any increase or decrease in costs, expenses or fees associated with such change (including any change to Unit Pricing). Catalent shall respond promptly to any request made by Client for a change in the Specifications, and both parties shall use commercially reasonable, good faith efforts to agree to the terms of such change in a timely manner. As soon as possible after a request is made for any change in Specifications, Catalent shall notify Client of the costs associated with such change and shall provide such supporting documentation as Client may reasonably require. Client shall pay all costs associated with such agreed upon changes. If there is a conflict between the terms of this Agreement and the terms of the Specifications, this Agreement shall control. Catalent reserves the right to postpone effecting changes to the Specifications until such time as the parties agree to and execute the required written amendment.
