Field Tests. Operational tests shall include but not be limited to the following: 4.1. Demonstration of function of all interlocks and limit switches. 4.2. Anti-collision system tests 4.3. Demonstration of brake torques and testing for thermal capacity. Each main hoist brake is to stop and hold the rated load from the maximum specified speeds with no regenerative or dynamic braking. 4.4. Demonstration of emergency stops including wireless E-stop under operating conditions. 4.5. Demonstration of each spreader function, including proper coiling of the spreader umbilical cable. 4.6. Verification of mating of trolley crane rails, distances between rails under full load and without load, between the rails and trolley wheel flanges and side safety plate 4.7. Demonstration of storm lock pins, including interlocks. 4.8. Demonstration of trim and skew function, with both empty spreader and rated load. 4.9. Verification that lighting levels meet the specification. 4.10. Measurement and recording of operating pressures of each hydraulic unit, if applicable. 4.11. Connection and disconnection of power supply plug 4.12. Operation of audible and visual movement alarms. 4.13. Verification that all reducers are correctly filled with oil and that all bearings, pins and couplings are greased and seals are properly retained. 4.14. Demonstration of auxiliary equipment, including:
Appears in 6 contracts
Samples: Crane Supply Contract, Crane Supply Contract, Crane Supply Contract
Field Tests. Operational tests shall include but not be limited to the following:
4.1. Demonstration of function of all interlocks and limit switches.
4.2. Anti-collision system tests
4.3. Demonstration of brake torques and testing for thermal capacity. Each main hoist brake is to stop and hold the rated load from the maximum specified speeds with no regenerative or dynamic braking.
4.4. Demonstration of emergency stops including wireless E-stop under operating conditions.
4.5. Demonstration of each spreader function, including proper coiling of the spreader umbilical cable.
4.6. Verification of mating of trolley crane rails, distances between rails under full load and without load, between the rails and trolley wheel flanges and side safety plate
4.7. Demonstration of storm lock pins, including interlocks.
4.8. Demonstration of trim and skew function, with both empty spreader and rated load.
4.9. Verification that lighting levels meet the specification.
4.10. Measurement and recording of operating pressures of each hydraulic unit, if applicable.
4.11. Connection and disconnection of power supply plug
4.12. Operation of audible and visual movement alarms.
4.13. Verification that all reducers are correctly filled with oil and that all bearings, pins and couplings are greased and seals are properly retained.
4.14. Demonstration of auxiliary equipment, including:
a. anemometer and repeating alarm, b. load weighing system
Appears in 1 contract
Samples: Crane Supply Contract
